More fixes to build failures

docs/source/release/v4.2.0/diffraction.rst

@@ -35,7 +35,7 @@ Bug Fixes
    :width: 500px
    :align: right
 
-.. figure:: ../../images/IndexPeaks.png
+.. figure:: ../../images/IndexPeaks.PNG
    :class: screenshot
    :width: 500px
    :align: right   
@@ -63,6 +63,6 @@ Bug Fixes
   so that it correctly reports the number of main & satellite reflections that have been indexed. Also, if a satellite
   peak cannot be indexed its HKL is reset to 000 rather than accidentally setting it to the HKL of the main reflection.
 
-``*``See associated photos
+``*`` See associated photos ``*``
 
 :ref:`Release 4.2.0 <v4.2.0>`

docs/source/release/v4.2.0/direct_geometry.rst

@@ -14,9 +14,9 @@ Algorithms
 ##########
 
 - :ref:`DirectILLApplySelfShielding <algm-DirectILLApplySelfShielding>` will now first subtract the empty container background, then apply the self-shielding correction of the sample.
-- Modified :ref:`MaskBTP <algm-MaskBTP-v1>`to include CHESS
+- Modified :ref:`MaskBTP <algm-MaskBTP-v1>` to include CHESS
 
-.. figure:: ../../images/CHESS.png
+.. figure:: ../../images/CHESS.PNG
    :class: screenshot
    :width: 200px
    :align: right

docs/source/release/v4.2.0/framework.rst

@@ -9,6 +9,7 @@ Framework Changes
    :class: screenshot
    :width: 385px
    :align: right
+
 Packaging
 #########
 - The macOS bundle now requires macOS High Sierra (10.13) as a minimum.

docs/source/release/v4.2.0/indirect_geometry.rst

@@ -5,97 +5,53 @@ Indirect Geometry Changes
 .. contents:: Table of Contents
    :local:
 
-.. warning:: **Developers:** Sort changes under appropriate heading
-    putting new features at the top of the section, followed by
-    improvements, followed by bug fixes.
-
-Improved
-########
-
-- Instrument definition is improved for IN16B to have the physical detector on the correct side of the beam axis, and different analyser focus for single detectors.
-- :ref:`LoadILLIndirect <algm-LoadILLIndirect>` is extended to support also the configurations with the first tube angle at 33.1 degrees.
-- :ref:`IndirectILLEnergyTransfer <algm-IndirectILLEnergyTransfer>` now offers the possibility to enable or disable the detector grouping both for Doppler and BATS modes. By default the pixels will be grouped tube by tube as before.
-- :ref:`IndirectILLEnergyTransfer <algm-IndirectILLEnergyTransfer>` offers an option to discard the single detectors if they were not enabled in the measurement.
-- A bug has been fixed in :ref:`MatchPeaks <algm-MatchPeaks>` which was causing wrong alignment in :ref:`IndirectILLReductionQENS <algm-IndirectILLReductionQENS>` with unmirror option 7, when the peaks in the alignment run are too narrow to be fitted.
-- :ref:`SofQWNormalisedPolygon <algm-SofQWNormalisedPolygon>` now checks input properties are valid.
-- :ref:`IndirectILLReductionFWS <algm-IndirectILLReductionFWS>` will now integrate the inelastic peaks correctly, based on the peak positions in the monitor spectrum.
-
-
-Algorithms
-----------
 
 Improvements
 ############
 
-- :ref:`IndirectQuickRun <algm-IndirectQuickRun>` and :ref:`IndirectSampleChanger <algm-IndirectSampleChanger>` have been
-  extended to allow them to perform a Width Fit. This utilizes the new algorithm :ref:`IndirectTwoPeakFit <algm-IndirectTwoPeakFit>`.
-
-Data Analysis Interface
------------------------
-
-Improvements
-############
-- Improved the output plotting options for Elwin and Iqt so that it is now possible to choose
-  a list of spectra for plotting. For example, entering 0-2,4,6-8 and clicking **Plot Spectra**
+- Instrument definition is improved for IN16B to have the physical detector on the correct side of the beam axis, and different analyser focus for single detectors.
+- Able to choose a list of spectra for plotting for all Indirect Interfaces. 
+For example, under Data Analysis>Elwin, entering 0-2,4,6-8 and clicking **Plot Spectra**
   will plot the workspace indices 0, 1, 2, 4, 6, 7 and 8. The same can be done for **Plot Tiled**
-  on the Iqt tab.
+  on the Iqt tab. It also possible to produce a contour plot using **Plot Contour** on the Diffraction Interface.
+- The Plotting Options have also been made more consistent across the interface.
 
+.. figure:: ../../images/Indirect_Data_Analysis_IqtFit.PNG
+  :class: screenshot
+  :align: right
+  :figwidth: 60%
+  :alt: The Indirect Data Analysis GUI in the Workbench.
 
-Data Reduction Interface
-------------------------
-
-Improvements
-############
-- Improved the output plotting options so that it is now possible to choose a list of spectra
-  for plotting. This is the same as described for the Elwin and Iqt tab in Data Analysis.
-- Improved the output plotting options so that they now show the workspace currently selected.
-  The options have also been made more consistent across the interface.
+Workbench
+-------------
 
+- The Indirect Bayes GUI has been added to the Workbench.
+- ``*``**The Indirect Data Analysis GUI has been added to the Workbench**``*``
 
-Data Corrections Interface
---------------------------
+Algorithms
+----------
 
-Improvements
-############
-- Improved the output plotting options so that it is now possible to choose a list of spectra
-  for plotting.
-- Improved the output plotting options so that they now show the workspace currently selected.
-  The options have also been made more consistent across the interface.
+- :ref:`IndirectQuickRun <algm-IndirectQuickRun>` and :ref:`IndirectSampleChanger <algm-IndirectSampleChanger>` have been
+  extended to allow them to perform a Width Fit. This utilizes the new algorithm :ref:`IndirectTwoPeakFit <algm-IndirectTwoPeakFit>`.
+- :ref:`LoadILLIndirect <algm-LoadILLIndirect>` is extended to support also the configurations with the first tube angle at 33.1 degrees.
+- :ref:`IndirectILLEnergyTransfer <algm-IndirectILLEnergyTransfer>` now offers the possibility to enable or disable the detector grouping both for Doppler and BATS modes. By default the pixels will be grouped tube by tube as before.
+- :ref:`IndirectILLEnergyTransfer <algm-IndirectILLEnergyTransfer>` offers an option to discard the single detectors if they were not enabled in the measurement.
+- :ref:`SofQWNormalisedPolygon <algm-SofQWNormalisedPolygon>` now checks input properties are valid.
+- :ref:`IndirectILLReductionFWS <algm-IndirectILLReductionFWS>` will now integrate the inelastic peaks correctly, based on the peak positions in the monitor spectrum.
 
 
 Simulations Interface
 ---------------------
 
-Improvements
-############
-- Improved the output plotting options so that it is now possible to choose a list of spectra
-  for plotting for the relevant tabs.
-- Improved the output plotting options so that they now show the workspace currently selected.
-  The options have also been made more consistent across the interface.
 - Improved the format of Abins HDF5 files to include readable set of advanced parameters. Values
   in the AbinsParameters module have been re-organised into a logical heirarchy; user scripts
   may need to be modified to match this.
 
+BugFixes
+########
 
-Diffraction Interface
----------------------
-
-Improvements
-############
-- Improved the output plotting options so that it is now possible to choose a list of spectra
-  for plotting. It also possible to do a contour plot using **Plot Contour**.
-- Improved the output plotting options so that they now show the workspace currently selected.
-
-The Workbench
--------------
-
-- The Indirect Bayes GUI has been added to the Workbench.
-- The Indirect Data Analysis GUI has been added to the Workbench.
+- A bug has been fixed in :ref:`MatchPeaks <algm-MatchPeaks>` which was causing wrong alignment in :ref:`IndirectILLReductionQENS <algm-IndirectILLReductionQENS>` with unmirror option 7, when the peaks in the alignment run are too narrow to be fitted.
 
-.. figure:: ../../images/Indirect_Data_Analysis_IqtFit.PNG
-  :class: screenshot
-  :align: center
-  :figwidth: 90%
-  :alt: The Indirect Data Analysis GUI in the Workbench.
+``*`` See associated image ``*``
 
 :ref:`Release 4.2.0 <v4.2.0>`

docs/source/release/v4.2.0/mantidworkbench.rst

@@ -109,6 +109,6 @@ Bugfixes
 - The button to "Remove" a curve in Figure Options is now the same size as the drop-down list of curves.
 - "MantidPlot" in window titles have been removed.
 
-``*``Bold: See associated image
+``*`` See associated image ``*``
 
 :ref:`Release 4.2.0 <v4.2.0>`