Newer
Older
<parameter-file instrument="CNCS" valid-from="2011-01-21T00:00:00">
<component-link name="CNCS">
<parameter name="deltaE-mode" type="string">
<value val="direct" />
</parameter>
<parameter name="ei-mon1-spec">
<value val="2" />
<value val="3" />
</parameter>
<parameter name="TS_mapping_file" type="string">
<value val="CNCS_TS_2008_08_18.dat" />
</parameter>
<!-- TODO: Update with real vanadium mass -->
<parameter name="vanadium-mass">
<value val="-1" />
</parameter>
<parameter name="bkgd-range-min">
<value val="44500" />
</parameter>
<parameter name="bkgd-range-max">
<value val="48000" />
</parameter>
<parameter name="scale-factor">
<value val="1.0" />
</parameter>
<parameter name="monovan-integr-min">
<value val="-1" />
</parameter>
<parameter name="monovan-integr-max">
<value val="1" />
</parameter>
<!-- Diagnostic test defaults -->
<!-- Absolute lo threshold for vanadium diag (tiny) -->
<parameter name="diag_tiny">
<value val="1e-10"/>
</parameter>
<!-- Absolute hi threshold for vanadium diag (huge) -->
<parameter name="diag_huge">
<value val="1e10"/>
</parameter>
<!-- Remove zeroes in background (s_zero)-->
<parameter name="diag_samp_zero">
<value val="0.0"/>
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
</parameter>
<!-- Fraction of median to consider counting low for the white beam diag (sv_lo)-->
<parameter name="diag_samp_lo">
<value val="0.0"/>
</parameter>
<!-- Fraction of median to consider counting high for the white beam diag (sv_hi)-->
<parameter name="diag_samp_hi">
<value val="5.0"/>
</parameter>
<!-- Error criterion as a multiple of error bar for background (sv_sig) -->
<parameter name="diag_samp_sig">
<value val="3.3"/>
</parameter>
<!-- Lower bound defining outliers as fraction of median value (v_out_lo)-->
<parameter name="diag_van_out_lo">
<value val="0.01"/>
</parameter>
<!-- Upper bound defining outliers as fraction of median value (v_out_hi)-->
<parameter name="diag_van_out_hi">
<value val="100."/>
</parameter>
<!-- Fraction of median to consider counting low for the white beam diag (vv_lo)-->
<parameter name="diag_van_lo">
<value val="0.1"/>
</parameter>
<!-- Fraction of median to consider counting high for the white beam diag (vv_hi)-->
<parameter name="diag_van_hi">
</parameter>
<!-- Error criterion as a multiple of error bar for background (vv_sig) -->
<parameter name="diag_van_sig">
<value val="3.3"/>
</parameter>
<!-- True if background is to be checked -->
<parameter name="check_background">
<value val="0.0"/>
</parameter>
<!-- True if the bleed tests should be run -->
<parameter name="diag_bleed_test">
<value val="0.0"/>
</parameter>
<!-- Variation for ratio test with second white beam -->
<parameter name="diag_variation">
<value val="1.1"/>
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
</parameter>
<!-- Absolute units conversion average -->
<parameter name="monovan_lo_bound">
<value val="0.01" />
</parameter>
<parameter name="monovan_hi_bound">
<value val="100" />
</parameter>
<parameter name="monovan_lo_frac">
<value val="0.8" />
</parameter>
<parameter name="monovan_hi_frac">
<value val="1.2" />
</parameter>
<!-- All the following parameters are taken directly from the MARI definition
and are WRONG! They are only here for now to get things working -->
<parameter name="wb-scale-factor">
<value val="1.0" />
</parameter>
<parameter name="wb-integr-min"><!-- tof=53000 -->
<value val="2.93" />
<parameter name="wb-integr-max"><!-- tof=52000 -->
<value val="3.07" />
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
</parameter>
<parameter name="norm-mon1-spec">
<value val="-3" />
</parameter>
<parameter name="norm-mon1-min">
<value val="1000" />
</parameter>
<parameter name="norm-mon1-max">
<value val="2000" />
</parameter>
<parameter name="abs-average-min">
<value val="1e-10" />
</parameter>
<parameter name="abs-average-max">
<value val="1e10" />
</parameter>
<parameter name="abs-median-lbound">
<value val="0.01" />
</parameter>
<parameter name="abs-median-ubound">
<value val="100" />
</parameter>
<parameter name="abs-median-lo-frac">
<value val="0.8" />
</parameter>
<parameter name="abs-median-hi-frac">
<value val="1.2" />
</parameter>
<parameter name="abs-median-signif">
<value val="3.3" />
</parameter>
<!-- formula for t0 calculation. See http://muparser.sourceforge.net/mup_features.html#idDef2 for available operators-->
<parameter name="t0_formula" type="string">
<value val="198.2 * (1.0 + incidentEnergy)^(-0.84098)" />
</parameter>
<parameter name="treat-background-as-events" type="string">
</parameter>