@@ -58,9 +58,6 @@ The necessary module errors and warnings have been included to make sure the use
Note: If the VisualizationGeant4 module is used in conjunction with and `arc_length_theta` different from 180deg, the Visualization GUI will show an error "Inconsistency in bounding boxes for solid". The origin of this error is unknown but the error can be ignored.
#### Cone:
A cone or partly made cone with an inner and an outer radius defined at the begin (negative z) and end (positive z) each.
starting_angle : start-angle ( default 0)
arc_length : length-of the arc (360 deg default)
A cone or partly made cone with an inner and an outer radius defined at the begin (negative z) and end (positive z) each.
* The `outer_radius_begin` of the cone is the outer radius at the begin (negative z) of the cone
@@ -70,6 +67,7 @@ A cone or partly made cone with an inner and an outer radius defined at the begi
* The `length` of the cone is the total length of the cone
* (Optional) The `starting_angle` of the cone is the azimuthal angle at which circumference of the cone will start in the XY-plane. 0 degrees refers to the point along the positive x-axis and the angle moves counter clockwise. Defaults to 0deg.
* (Optional) The `arc_length` of the cone is the arc-length of the cone that will be created
Note that `arc_length` works the same as the `arc_length` from the cylinder
