@@ -33,7 +33,7 @@ All charge carriers are deposited at time zero, i.e. at the beginning of the eve
*`source_type`: Modeled source type for the deposition of charge carriers. For `point`, charge carriers are deposited at the position given by the `position` parameter. For `mip`, charge carriers are deposited along a line through the full sensor thickness. Defaults to `point`.
*`position`: Position in local coordinates of the sensor, where charge carriers should be deposited. Expects three values for local-x, local-y and local-z position in the sensor volume and defaults to `0um 0um 0um`, i.e. the center of first (lower left) pixel. When using source type `mip`, providing a 2D position is sufficient since it only uses the x and y coordinates. If used in scan mode, it allows you to shift the origin of each deposited charge by adding this value. If the scan is only performed in one or two dimensions, the remaining coordinate will constantly have the value given by `position`.
*`spot_size`: Width of the Gaussian distribution used to smear the position in the `spot` model. Only one value is taken and used for all three dimensions.
*`scan_coordinates`: Coordinates to scan over, a combiantion of x, y, z. Defaults to `x y z`, i.e. all three spatial coordinates. The `position`parameter is used to determine the value of the coordiantes that are not scanned over if a partial scan is requested, and the start offset of the scan for the other coordinates.
*`scan_coordinates`: Coordinates to scan over, a combination of x, y, z. Defaults to `x y z`, i.e. all three spatial coordinates. The `position`parameter is used to determine the value of the coordinates that are not scanned over if a partial scan is requested, and the start offset of the scan for the other coordinates.
### Plotting parameters
@@ -53,7 +53,7 @@ spot_size = 3um
number_of_charges=100
```
Example configuration for a point source scanned over the x and y cooridantes, with a fixed z coordinate of 10 micrometers (with the sensor centre at 0):
Example configuration for a point source scanned over the x and y cooridantes, with a fixed z coordinate of 10 micrometers (with the sensor center at 0):
