kernel/common-config: enable a whole bunch of stuff (f6dc8ef4) · Commits · nix / nixpkgs

pkgs/os-specific/linux/kernel/common-config.nix

+163 −10

Original line number	Diff line number	Diff line
		@@ -62,10 +62,26 @@ let
		SUNRPC_DEBUG = yes;
		# Provide access to tunables like sched_migration_cost_ns
		SCHED_DEBUG = yes;

		# Count IRQ and steal CPU time separately
		IRQ_TIME_ACCOUNTING = yes;
		PARAVIRT_TIME_ACCOUNTING = yes;

		# Enable CPU lockup detection
		LOCKUP_DETECTOR = yes;
		SOFTLOCKUP_DETECTOR = yes;
		HARDLOCKUP_DETECTOR = yes;

		# Enable streaming logs to a remote device over a network
		NETCONSOLE = module;
		NETCONSOLE_DYNAMIC = yes;

		# Export known printks in debugfs
		PRINTK_INDEX = whenAtLeast "5.15" yes;
		};

		power-management = {
		CPU_FREQ_DEFAULT_GOV_PERFORMANCE = yes;
		CPU_FREQ_DEFAULT_GOV_SCHEDUTIL = yes;
		CPU_FREQ_GOV_SCHEDUTIL = yes;
		PM_ADVANCED_DEBUG = yes;
		PM_WAKELOCKS = yes;
		@@ -85,6 +101,30 @@ let
		# depends on HAVE_VIRT_CPU_ACCOUNTING_GEN depends on 64BIT,
		# so we can't force-enable this
		RCU_LAZY = whenAtLeast "6.2" (option yes);

		# Auto suspend Bluetooth devices at idle
		BT_HCIBTUSB_AUTOSUSPEND = yes;

		# Expose cpufreq stats in sysfs
		CPU_FREQ_STAT = yes;

		# Enable CPU energy model for scheduling
		ENERGY_MODEL = whenAtLeast "5.0" yes;

		# Enable scheduling stats collection
		SCHEDSTATS = yes;

		# Enable thermal interface netlink API
		THERMAL_NETLINK = whenAtLeast "5.9" yes;

		# Prefer power-efficient workqueue implementation to per-CPU workqueues,
		# which is slightly slower, but improves battery life.
		# This is opt-in per workqueue, and can be disabled globally with a kernel command line option.
		WQ_POWER_EFFICIENT_DEFAULT = yes;

		# Default SATA link power management to "medium with device initiated PM"
		# for some extra power savings.
		SATA_MOBILE_LPM_POLICY = whenAtLeast "5.18" (freeform "3");
		} // optionalAttrs (stdenv.hostPlatform.isx86) {
		INTEL_IDLE = yes;
		INTEL_RAPL = whenAtLeast "5.3" module;
		@@ -109,6 +149,9 @@ let
		CHT_DC_TI_PMIC_OPREGION = whenAtLeast "5.10" yes;
		MFD_TPS68470 = whenBetween "5.10" "5.13" yes;
		TPS68470_PMIC_OPREGION = whenAtLeast "5.10" yes;

		# Enable Intel thermal hardware feedback
		INTEL_HFI_THERMAL = whenAtLeast "5.18" yes;
		};

		external-firmware = {
		@@ -136,6 +179,16 @@ let
		DAMON_DBGFS = whenAtLeast "5.15" yes;
		DAMON_RECLAIM = whenAtLeast "5.16" yes;
		DAMON_LRU_SORT = whenAtLeast "6.0" yes;
		# Support recovering from memory failures on systems with ECC and MCA recovery.
		MEMORY_FAILURE = yes;

		# Collect ECC errors and retire pages that fail too often
		RAS_CEC = yes;
		} // optionalAttrs (stdenv.is32bit) {
		# Enable access to the full memory range (aka PAE) on 32-bit architectures
		# This check isn't super accurate but it's close enough
		HIGHMEM = option yes;
		BOUNCE = option yes;
		};

		memtest = {
		@@ -154,6 +207,9 @@ let
		BFQ_GROUP_IOSCHED = yes;
		MQ_IOSCHED_KYBER = yes;
		IOSCHED_BFQ = module;
		# Enable CPU utilization clamping for RT tasks
		UCLAMP_TASK = whenAtLeast "5.3" yes;
		UCLAMP_TASK_GROUP = whenAtLeast "5.4" yes;
		};


		@@ -166,6 +222,7 @@ let
		# Enable NUMA.
		numa = {
		NUMA = option yes;
		NUMA_BALANCING = option yes;
		};

		networking = {
		@@ -250,6 +307,9 @@ let
		# Bridge Netfilter Configuration
		NF_TABLES_BRIDGE = mkMerge [ (whenOlder "5.3" yes)
		(whenAtLeast "5.3" module) ];
		# Expose some debug info
		NF_CONNTRACK_PROCFS = yes;
		NF_FLOW_TABLE_PROCFS = whenAtLeast "6.0" yes;

		# needed for `dropwatch`
		# Builtin-only since https://github.com/torvalds/linux/commit/f4b6bcc7002f0e3a3428bac33cf1945abff95450
		@@ -276,6 +336,10 @@ let
		INFINIBAND = module;
		INFINIBAND_IPOIB = module;
		INFINIBAND_IPOIB_CM = yes;

		# Enable debugfs for wireless drivers
		CFG80211_DEBUGFS = yes;
		MAC80211_DEBUGFS = yes;
		} // optionalAttrs (stdenv.hostPlatform.system == "aarch64-linux") {
		# Not enabled by default, hides modules behind it
		NET_VENDOR_MEDIATEK = yes;
		@@ -288,8 +352,8 @@ let
		CFG80211_WEXT = option yes; # Without it, ipw2200 drivers don't build
		IPW2100_MONITOR = option yes; # support promiscuous mode
		IPW2200_MONITOR = option yes; # support promiscuous mode
		HOSTAP_FIRMWARE = option yes; # Support downloading firmware images with Host AP driver
		HOSTAP_FIRMWARE_NVRAM = option yes;
		HOSTAP_FIRMWARE = whenOlder "6.8" (option yes); # Support downloading firmware images with Host AP driver
		HOSTAP_FIRMWARE_NVRAM = whenOlder "6.8" (option yes);
		MAC80211_MESH = option yes; # Enable 802.11s (mesh networking) support
		ATH9K_PCI = option yes; # Detect Atheros AR9xxx cards on PCI(e) bus
		ATH9K_AHB = option yes; # Ditto, AHB bus
		@@ -345,8 +409,12 @@ let
		FONT_TER16x32 = whenAtLeast "5.0" yes;
		};

		video = {
		video = let
		whenHasDevicePrivate = mkIf (!stdenv.isx86_32 && versionAtLeast version "5.1");
		in {
		DRM_LEGACY = whenOlder "6.8" no;
		DRM_SIMPLEDRM = yes;

		NOUVEAU_LEGACY_CTX_SUPPORT = whenBetween "5.2" "6.3" no;

		# Allow specifying custom EDID on the kernel command line
		@@ -371,8 +439,25 @@ let
		DRM_AMD_DC_FP = whenAtLeast "6.4" yes;
		DRM_AMD_DC_HDCP = whenBetween "5.5" "6.4" yes;
		DRM_AMD_DC_SI = whenAtLeast "5.10" yes;

		# Enable AMD Audio Coprocessor support for HDMI outputs
		DRM_AMD_ACP = yes;

		# Enable AMD secure display when available
		DRM_AMD_SECURE_DISPLAY = whenAtLeast "5.13" yes;

		# Enable new firmware (and by extension NVK) for compatible hardware on Nouveau
		DRM_NOUVEAU_GSP_DEFAULT = whenAtLeast "6.8" yes;

		# Enable Nouveau shared virtual memory (used by OpenCL)
		DEVICE_PRIVATE = whenHasDevicePrivate yes;
		DRM_NOUVEAU_SVM = whenHasDevicePrivate yes;

		# Enable HDMI-CEC receiver support
		MEDIA_CEC_RC = whenAtLeast "5.10" yes;

		# Enable CEC over DisplayPort
		DRM_DP_CEC = yes;
		} // optionalAttrs (stdenv.hostPlatform.system == "x86_64-linux") {
		# Intel GVT-g graphics virtualization supports 64-bit only
		DRM_I915_GVT = yes;
		@@ -409,6 +494,7 @@ let
		SND_HDA_CODEC_CA0132_DSP = whenOlder "5.7" yes; # Enable DSP firmware loading on Creative Soundblaster Z/Zx/ZxR/Recon
		SND_OSSEMUL = yes;
		SND_USB_CAIAQ_INPUT = yes;
		SND_USB_AUDIO_MIDI_V2 = whenAtLeast "6.5" yes;
		# Enable Sound Open Firmware support
		} // optionalAttrs (stdenv.hostPlatform.system == "x86_64-linux" &&
		versionAtLeast version "5.5") {
		@@ -445,14 +531,23 @@ let
		SND_SOC_SOF_TIGERLAKE_SUPPORT = whenOlder "5.12" yes;
		};

		usb-serial = {
		USB_SERIAL_GENERIC = yes; # USB Generic Serial Driver
		};

		usb = {
		USB = yes; # compile USB core into kernel, so we can use USB_SERIAL_CONSOLE before modules

		USB_EHCI_ROOT_HUB_TT = yes; # Root Hub Transaction Translators
		USB_EHCI_TT_NEWSCHED = yes; # Improved transaction translator scheduling
		USB_HIDDEV = yes; # USB Raw HID Devices (like monitor controls and Uninterruptable Power Supplies)

		# default to dual role mode
		USB_DWC2_DUAL_ROLE = yes;
		USB_DWC3_DUAL_ROLE = yes;
		};

		usb-serial = {
		USB_SERIAL = yes;
		USB_SERIAL_GENERIC = yes; # USB Generic Serial Driver
		USB_SERIAL_CONSOLE = yes; # Allow using USB serial adapter as console
		U_SERIAL_CONSOLE = whenAtLeast "5.10" yes; # Allow using USB gadget as console
		};

		# Filesystem options - in particular, enable extended attributes and
		@@ -533,6 +628,7 @@ let

		SQUASHFS_FILE_DIRECT = yes;
		SQUASHFS_DECOMP_MULTI_PERCPU = whenOlder "6.2" yes;
		SQUASHFS_CHOICE_DECOMP_BY_MOUNT = whenAtLeast "6.2" yes;
		SQUASHFS_XATTR = yes;
		SQUASHFS_ZLIB = yes;
		SQUASHFS_LZO = yes;
		@@ -598,6 +694,16 @@ let
		CRYPTO_DRBG_HASH = yes;
		CRYPTO_DRBG_CTR = yes;

		# Enable KFENCE
		# See: https://docs.kernel.org/dev-tools/kfence.html
		KFENCE = whenAtLeast "5.12" yes;

		# Enable support for page poisoning. Still needs to be enabled on the command line to actually work.
		PAGE_POISONING = yes;

		# Enable stack smashing protections in schedule()
		# See: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v4.8&id=0d9e26329b0c9263d4d9e0422d80a0e73268c52f
		SCHED_STACK_END_CHECK = yes;
		} // optionalAttrs stdenv.hostPlatform.isx86_64 {
		# Enable Intel SGX
		X86_SGX = whenAtLeast "5.11" yes;
		@@ -614,6 +720,9 @@ let
		SEV_GUEST = whenAtLeast "5.19" module;
		# Shadow stacks
		X86_USER_SHADOW_STACK = whenAtLeast "6.6" yes;

		# Mitigate straight line speculation at the cost of some file size
		SLS = whenAtLeast "5.17" yes;
		};

		microcode = {
		@@ -791,6 +900,10 @@ let
		# Unconditionally enabled, because it is required for CRIU and
		# it provides the kcmp() system call that Mesa depends on.
		CHECKPOINT_RESTORE = yes;

		# Allows soft-dirty tracking on pages, used by CRIU.
		# See https://docs.kernel.org/admin-guide/mm/soft-dirty.html
		MEM_SOFT_DIRTY = mkIf (!stdenv.isx86_32) yes;
		};

		misc = let
		@@ -805,6 +918,9 @@ let
		# enabled by default in x86_64 but not arm64, so we do that here
		HIDRAW = yes;

		# Enable loading HID fixups as eBPF from userspace
		HID_BPF = whenAtLeast "6.3" yes;

		HID_ACRUX_FF = yes;
		DRAGONRISE_FF = yes;
		GREENASIA_FF = yes;
		@@ -832,7 +948,10 @@ let
		# Enable initrd support.
		BLK_DEV_INITRD = yes;

		PM_TRACE_RTC = no; # Disable some expensive (?) features.
		# Allows debugging systems that get stuck during suspend/resume
		PM_TRACE = yes;
		PM_TRACE_RTC = yes;

		ACCESSIBILITY = yes; # Accessibility support
		AUXDISPLAY = yes; # Auxiliary Display support
		HIPPI = yes;
		@@ -857,6 +976,11 @@ let

		BLK_SED_OPAL = yes;

		# Enable support for block layer inline encryption
		BLK_INLINE_ENCRYPTION = whenAtLeast "5.8" yes;
		# ...but fall back to CPU encryption if unavailable
		BLK_INLINE_ENCRYPTION_FALLBACK = whenAtLeast "5.8" yes;

		BSD_PROCESS_ACCT_V3 = yes;

		SERIAL_DEV_BUS = yes; # enables support for serial devices
		@@ -971,7 +1095,7 @@ let
		# Disable the firmware helper fallback, udev doesn't implement it any more
		FW_LOADER_USER_HELPER_FALLBACK = option no;

		FW_LOADER_COMPRESS = option yes;
		FW_LOADER_COMPRESS = whenAtLeast "5.3" yes;

		HOTPLUG_PCI_ACPI = yes; # PCI hotplug using ACPI
		HOTPLUG_PCI_PCIE = yes; # PCI-Expresscard hotplug support
		@@ -1018,6 +1142,13 @@ let

		# Set system time from RTC on startup and resume
		RTC_HCTOSYS = option yes;

		# Expose watchdog information in sysfs
		WATCHDOG_SYSFS = yes;

		# Enable generic kernel watch queues
		# See https://docs.kernel.org/core-api/watch_queue.html
		WATCH_QUEUE = whenAtLeast "5.8" yes;
		} // optionalAttrs (stdenv.hostPlatform.system == "x86_64-linux" \|\| stdenv.hostPlatform.system == "aarch64-linux") {
		# Enable CPU/memory hotplug support
		# Allows you to dynamically add & remove CPUs/memory to a VM client running NixOS without requiring a reboot
		@@ -1048,6 +1179,10 @@ let
		# https://github.com/torvalds/linux/blob/856deb866d16e29bd65952e0289066f6078af773/kernel/dma/contiguous.c#L35-L44
		CMA_SIZE_MBYTES = freeform "32";

		# Add debug interfaces for CMA
		CMA_DEBUGFS = yes;
		CMA_SYSFS = yes;

		# Many ARM SBCs hand off a pre-configured framebuffer.
		# This always can can be replaced by the actual native driver.
		# Keeping it a built-in ensures it will be used if possible.
		@@ -1093,6 +1228,24 @@ let
		} // optionalAttrs (versionAtLeast version "5.4" && stdenv.hostPlatform.system == "x86_64-linux") {
		CHROMEOS_LAPTOP = module;
		CHROMEOS_PSTORE = module;
		} // optionalAttrs (stdenv.hostPlatform.system == "x86_64-linux") {
		# Enable x86 resource control
		X86_CPU_RESCTRL = whenAtLeast "5.0" yes;

		# Enable TSX on CPUs where it's not vulnerable
		X86_INTEL_TSX_MODE_AUTO = yes;

		# Enable AMD Wi-Fi RF band mitigations
		# See https://cateee.net/lkddb/web-lkddb/AMD_WBRF.html
		AMD_WBRF = whenAtLeast "6.8" yes;

		# Enable Intel Turbo Boost Max 3.0
		INTEL_TURBO_MAX_3 = yes;
		};

		accel = {
		# Build DRM accelerator devices
		DRM_ACCEL = whenAtLeast "6.2" yes;
		};
		};
		in

Admin message