nixos: add option `hardware.enableAllHardware` (#364479) (dfd7b670) · Commits · nix / nixpkgs

nixos/modules/hardware/all-hardware.nix

0 → 100644

+174 −0

Original line number	Diff line number	Diff line
		# This module enables all hardware supported by NixOS: i.e., all
		# firmware is included, and all devices from which one may boot are
		# enabled in the initrd. Its primary use is in the NixOS installation
		# CDs.

		{
		config,
		lib,
		pkgs,
		...
		}:
		let
		platform = pkgs.stdenv.hostPlatform;
		in
		{

		options = {
		hardware.enableAllHardware = lib.mkEnableOption "Enable support for most hardware";
		};

		config = lib.mkIf config.hardware.enableAllHardware {

		# The initrd has to contain any module that might be necessary for
		# supporting the most important parts of HW like drives.
		boot.initrd.availableKernelModules =
		[
		# SATA/PATA support.
		"ahci"

		"ata_piix"

		"sata_inic162x"
		"sata_nv"
		"sata_promise"
		"sata_qstor"
		"sata_sil"
		"sata_sil24"
		"sata_sis"
		"sata_svw"
		"sata_sx4"
		"sata_uli"
		"sata_via"
		"sata_vsc"

		"pata_ali"
		"pata_amd"
		"pata_artop"
		"pata_atiixp"
		"pata_efar"
		"pata_hpt366"
		"pata_hpt37x"
		"pata_hpt3x2n"
		"pata_hpt3x3"
		"pata_it8213"
		"pata_it821x"
		"pata_jmicron"
		"pata_marvell"
		"pata_mpiix"
		"pata_netcell"
		"pata_ns87410"
		"pata_oldpiix"
		"pata_pcmcia"
		"pata_pdc2027x"
		"pata_qdi"
		"pata_rz1000"
		"pata_serverworks"
		"pata_sil680"
		"pata_sis"
		"pata_sl82c105"
		"pata_triflex"
		"pata_via"
		"pata_winbond"

		# SCSI support (incomplete).
		"3w-9xxx"
		"3w-xxxx"
		"aic79xx"
		"aic7xxx"
		"arcmsr"
		"hpsa"

		# USB support, especially for booting from USB CD-ROM
		# drives.
		"uas"

		# SD cards.
		"sdhci_pci"

		# NVMe drives
		"nvme"

		# Firewire support. Not tested.
		"ohci1394"
		"sbp2"

		# Virtio (QEMU, KVM etc.) support.
		"virtio_net"
		"virtio_pci"
		"virtio_mmio"
		"virtio_blk"
		"virtio_scsi"
		"virtio_balloon"
		"virtio_console"

		# VMware support.
		"mptspi"
		"vmxnet3"
		"vsock"
		]
		++ lib.optional platform.isx86 "vmw_balloon"
		++ lib.optionals (pkgs.stdenv.hostPlatform.isi686 \|\| pkgs.stdenv.hostPlatform.isx86_64) [
		"vmw_vmci"
		"vmwgfx"
		"vmw_vsock_vmci_transport"

		# Hyper-V support.
		"hv_storvsc"
		]
		++ lib.optionals pkgs.stdenv.hostPlatform.isAarch [
		# Allwinner support
		# Required for early KMS
		"sun4i-drm"
		"sun8i-mixer" # Audio, but required for kms

		# PWM for the backlight
		"pwm-sun4i"

		# Broadcom
		"vc4"
		]
		++ lib.optionals pkgs.stdenv.hostPlatform.isAarch64 [
		# Most of the following falls into two categories:
		# - early KMS / early display
		# - early storage (e.g. USB) support

		# Broadcom

		"pcie-brcmstb"

		# Rockchip
		"dw-hdmi"
		"dw-mipi-dsi"
		"rockchipdrm"
		"rockchip-rga"
		"phy-rockchip-pcie"
		"pcie-rockchip-host"

		# Misc. uncategorized hardware

		# Used for some platform's integrated displays
		"panel-simple"
		"pwm-bl"

		# Power supply drivers, some platforms need them for USB
		"axp20x-ac-power"
		"axp20x-battery"
		"pinctrl-axp209"
		"mp8859"

		# USB drivers
		"xhci-pci-renesas"

		# Reset controllers
		"reset-raspberrypi" # Triggers USB chip firmware load.

		# Misc "weak" dependencies
		"analogix-dp"
		"analogix-anx6345" # For DP or eDP (e.g. integrated display)
		];

		# Include lots of firmware.
		hardware.enableRedistributableFirmware = true;
		};
		}

nixos/modules/installer/cd-dvd/installation-cd-base.nix

+2 −1

Original line number	Diff line number	Diff line
		@@ -6,11 +6,12 @@
		[ ./iso-image.nix

		# Profiles of this basic installation CD.
		../../profiles/all-hardware.nix
		../../profiles/base.nix
		../../profiles/installation-device.nix
		];

		hardware.enableAllHardware = true;

		# Adds terminus_font for people with HiDPI displays
		console.packages = options.console.packages.default ++ [ pkgs.terminus_font ];

nixos/modules/installer/netboot/netboot-base.nix

+2 −1

Original line number	Diff line number	Diff line
		@@ -10,8 +10,9 @@ with lib;
		./netboot.nix

		# Profiles of this basic netboot media
		../../profiles/all-hardware.nix
		../../profiles/base.nix
		../../profiles/installation-device.nix
		];

		hardware.enableAllHardware = true;
		}

nixos/modules/installer/sd-card/sd-image.nix

+2 −1

Original line number	Diff line number	Diff line
		@@ -29,7 +29,6 @@ in
		imports = [
		(mkRemovedOptionModule [ "sdImage" "bootPartitionID" ] "The FAT partition for SD image now only holds the Raspberry Pi firmware files. Use firmwarePartitionID to configure that partition's ID.")
		(mkRemovedOptionModule [ "sdImage" "bootSize" ] "The boot files for SD image have been moved to the main ext4 partition. The FAT partition now only holds the Raspberry Pi firmware files. Changing its size may not be required.")
		../../profiles/all-hardware.nix
		];

		options.sdImage = {
		@@ -162,6 +161,8 @@ in
		};

		config = {
		hardware.enableAllHardware = true;

		fileSystems = {
		"/boot/firmware" = {
		device = "/dev/disk/by-label/${config.sdImage.firmwarePartitionName}";

nixos/modules/module-list.nix

+1 −0

Original line number	Diff line number	Diff line
		@@ -48,6 +48,7 @@
		./config/zram.nix
		./hardware/acpilight.nix
		./hardware/all-firmware.nix
		./hardware/all-hardware.nix
		./hardware/apple-touchbar.nix
		./hardware/bladeRF.nix
		./hardware/brillo.nix

Admin message