Merge pull request #228225 from LeSuisse/strongswan-5.9.10

      irrespective of the value of this option (even when set to no).

    '';

    childless = mkEnumParam [ "allow" "force" "never" ] "allow" ''

      Use childless IKE_SA initiation (RFC 6023) for IKEv2.  Acceptable values

      are `allow` (the default), `force` and

      `never`. If set to `allow`, responders

    childless = mkEnumParam [ "allow" "prefer" "force" "never" ] "allow" ''

      Use childless IKE_SA initiation (_allow_, _prefer_, _force_ or _never_).

      Use childless IKE_SA initiation (RFC 6023) for IKEv2, with the first

      CHILD_SA created with a separate CREATE_CHILD_SA exchange (e.g. to use an

      independent DH exchange for all CHILD_SAs).  Acceptable values are `allow`

      (the default), `prefer`, `force` and `never`. If set to `allow`, responders

      will accept childless IKE_SAs (as indicated via notify in the IKE_SA_INIT

      response) while initiators continue to create regular IKE_SAs with the

      first CHILD_SA created during IKE_AUTH, unless the IKE_SA is initiated

      explicitly without any children (which will fail if the responder does not

      support or has disabled this extension).  If set to

      `force`, only childless initiation is accepted and the

      first CHILD_SA is created with a separate CREATE_CHILD_SA exchange

      (e.g. to use an independent DH exchange for all CHILD_SAs). Finally,

      setting the option to `never` disables support for

      childless IKE_SAs as responder.

      response) while initiators continue to create regular IKE_SAs with the first

      CHILD_SA created during IKE_AUTH, unless the IKE_SA is initiated explicitly

      without any children (which will fail if the responder does not support or

      has disabled this extension). The effect of `prefer` is the same as `allow`

      on responders, but as initiator a childless IKE_SA is initiated if the

      responder supports it. If set to `force`, only childless initiation is

      accepted in either role.  Finally, setting the option to `never` disables

      support for childless IKE_SAs as responder.

    '';

    send_certreq = mkYesNoParam yes ''

    if_id_in = mkStrParam "0" ''

      XFRM interface ID set on inbound policies/SA, can be overridden by child

      config, see there for details.

      The special value `%unique` allocates a unique interface ID per IKE_SA,

      which is inherited by all its CHILD_SAs (unless overridden there), beyond

      that the value `%unique-dir` assigns a different unique interface ID for

      each direction (in/out).

    '';

    if_id_out = mkStrParam "0" ''

      XFRM interface ID set on outbound policies/SA, can be overridden by child

      config, see there for details.

      The special value `%unique` allocates a unique interface ID per IKE_SA,

      which is inherited by all its CHILD_SAs (unless overridden there), beyond

      that the value `%unique-dir` assigns a different unique interface ID for

      each direction (in/out).

    '';

    mediation = mkYesNoParam no ''

        protection.

      '';

      hw_offload = mkEnumParam ["yes" "no" "auto"] "no" ''

      hw_offload = mkEnumParam ["yes" "no" "auto" "crypto" "packet"] "no" ''

        Enable hardware offload for this CHILD_SA, if supported by the IPsec

        implementation. The value `yes` enforces offloading

        and the installation will fail if it's not supported by either kernel or

        device. The value `auto` enables offloading, if it's

        supported, but the installation does not fail otherwise.

        implementation. The values `crypto` or `packet` enforce crypto or full

        packet offloading and the installation will fail if the selected mode is not

        supported by either kernel or device. On Linux, `packet` also offloads

        policies, including trap policies. The value `auto` enables full packet

        or crypto offloading, if either is supported, but the installation does not

        fail otherwise.

      '';

      copy_df = mkYesNoParam yes ''

stdenv.mkDerivation rec {

  pname = "strongswan";

  version = "5.9.8"; # Make sure to also update <nixpkgs/nixos/modules/services/networking/strongswan-swanctl/swanctl-params.nix> when upgrading!

  version = "5.9.10"; # Make sure to also update <nixpkgs/nixos/modules/services/networking/strongswan-swanctl/swanctl-params.nix> when upgrading!

  src = fetchFromGitHub {

    owner = "strongswan";

    repo = "strongswan";

    rev = version;

    sha256 = "sha256-RRvMQhDVoXF3Uok/Huq20RhqSsMnAsXHKOWfrXypDOk=";

    hash = "sha256-vYM3RVS6/yDNbY6X8lZT0GK0dczjw8hs3NplFEzq0fg=";

  };

  dontPatchELF = true;