Commit 6568016f authored by Lorenz Brun's avatar Lorenz Brun
Browse files

u-boot: ROCK64 RAM init improvements 

This switches the ROCK64 over to the open-source RAM init as it now
works flawlessly. It also removes the HDCP flag from the ATF for the
RK3328 as it cannot use it, it is only used in the RK3399. This makes
the ROCK64 u-boot now fully open.

There is also an issue with the ROCK64 v2 revision where the DRAM
routing is marginal, making some of them unstable. So also package a
variant which uses a lower-speed DDR3 timing configuration which is
stable on these boards.
parent edb9802b

pkgs/misc/arm-trusted-firmware/default.nix

+0 −1
Original line number Diff line number Diff line
@@ -141,7 +141,6 @@ in { 
    platform = "rk3328";

    extraMeta.platforms = ["aarch64-linux"];

    filesToInstall = [ "build/${platform}/release/bl31/bl31.elf"];

    platformCanUseHDCPBlob = true;

  };



  armTrustedFirmwareRK3399 = buildArmTrustedFirmware rec {

pkgs/misc/uboot/default.nix

+19 −23
Original line number Diff line number Diff line
@@ -497,32 +497,28 @@ in { 
    filesToInstall = ["u-boot.bin"];

  };



  ubootRock64 = let

    rkbin = fetchFromGitHub {

      owner = "ayufan-rock64";

      repo = "rkbin";

      rev = "f79a708978232a2b6b06c2e4173c5314559e0d3a";

      sha256 = "0h7xm4ck3p3380c6bqm5ixrkxwcx6z5vysqdwvfa7gcqx5d6x5zz";

    };

  in buildUBoot {

  ubootRock64 = buildUBoot {

    defconfig = "rock64-rk3328_defconfig";

    extraMeta = {

      platforms = [ "aarch64-linux" ];

      license = lib.licenses.unfreeRedistributableFirmware;

    };

    extraMeta.platforms = [ "aarch64-linux" ];

    BL31="${armTrustedFirmwareRK3328}/bl31.elf";

    filesToInstall = [ "u-boot.itb" "idbloader.img"];

    # Derive MAC address from cpuid

    # Submitted upstream: https://patchwork.ozlabs.org/patch/1203686/

    extraConfig = ''

      CONFIG_MISC_INIT_R=y

    '';

    # Close to being blob free, but the U-Boot TPL causes random memory

    # corruption

    postBuild = ''

      ./tools/mkimage -n rk3328 -T rksd -d ${rkbin}/rk33/rk3328_ddr_786MHz_v1.13.bin idbloader.img

      cat spl/u-boot-spl.bin >> idbloader.img

    filesToInstall = [ "u-boot.itb" "idbloader.img" "u-boot-rockchip.bin" ];

  };



  # A special build with much lower memory frequency (666 vs 1600 MT/s) which

  # makes ROCK64 V2 boards stable. This is necessary because the DDR3 routing

  # on that revision is marginal and not uncoditionally stable at the specified

  # frequency. If your ROCK64 is unstable you can try this u-boot variant to

  # see if it works better for you. The only disadvantage is lowered memory

  # bandwidth.

  ubootRock64v2 = buildUBoot {

    prePatch = ''

      substituteInPlace arch/arm/dts/rk3328-rock64-u-boot.dtsi \

        --replace rk3328-sdram-lpddr3-1600.dtsi rk3328-sdram-lpddr3-666.dtsi

    '';

    defconfig = "rock64-rk3328_defconfig";

    extraMeta.platforms = [ "aarch64-linux" ];

    BL31="${armTrustedFirmwareRK3328}/bl31.elf";

    filesToInstall = [ "u-boot.itb" "idbloader.img" "u-boot-rockchip.bin" ];

  };



  ubootRockPro64 = buildUBoot {

pkgs/top-level/all-packages.nix

+1 −0
Original line number Diff line number Diff line
@@ -28876,6 +28876,7 @@ with pkgs; 
    ubootRaspberryPi4_64bit

    ubootRaspberryPiZero

    ubootRock64

    ubootRock64v2

    ubootRockPi4

    ubootRockPro64

    ubootROCPCRK3399