petsc: use mpiCheckPhaseHook to bypass check in sandbox

diff --git a/src/snes/tutorials/makefile b/src/snes/tutorials/makefile

index fa15faad39e..7670e80931e 100644

--- a/src/snes/tutorials/makefile

+++ b/src/snes/tutorials/makefile

@@ -13,6 +13,7 @@ ex55: ex55.o ex55k.o

 #  these tests are used by the makefile in PETSC_DIR for basic tests of the install and should not be removed

 testex5f: ex5f.PETSc

 	-@${MPIEXEC} -n 1 ${MPIEXEC_TAIL} ./ex5f -snes_rtol 1e-4 > ex5f_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex5f_1.tmp; \

         if (${DIFF} output/ex5f_1.testout ex5f_1.tmp > /dev/null 2>&1) then \

           echo "Fortran example src/snes/tutorials/ex5f run successfully with 1 MPI process"; \

         else \

@@ -25,6 +26,7 @@ testex5f: ex5f.PETSc

         ${MAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ex5f.rm;

 testex19: ex19.PETSc

 	-@${MPIEXEC} -n 1 ${MPIEXEC_TAIL} ./ex19 -da_refine 3 -pc_type mg -ksp_type fgmres  > ex19_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_1.tmp; \

         if (${DIFF} output/ex19_1.testout ex19_1.tmp > /dev/null 2>&1) then \

           echo "C/C++ example src/snes/tutorials/ex19 run successfully with 1 MPI process"; \

         else \

@@ -36,6 +38,7 @@ testex19: ex19.PETSc

         ${RM} -f ex19_1.tmp;

 testex19_mpi:

 	-@${MPIEXEC} -n 2 ${MPIEXEC_TAIL} ./ex19 -da_refine 3 -pc_type mg -ksp_type fgmres  > ex19_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_1.tmp; \

         if (${DIFF} output/ex19_1.testout ex19_1.tmp > /dev/null 2>&1) then \

           echo "C/C++ example src/snes/tutorials/ex19 run successfully with 2 MPI processes"; \

         else \

@@ -48,6 +51,7 @@ testex19_mpi:

 #use unpreconditioned norm because HYPRE device installations use different AMG parameters

 runex19_hypre:

 	-@${MPIEXEC} -n 2 ${MPIEXEC_TAIL} ./ex19 -da_refine 3 -snes_monitor_short -ksp_norm_type unpreconditioned -pc_type hypre > ex19_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_1.tmp; \

           if (${DIFF} output/ex19_hypre.out ex19_1.tmp) then \

             echo "C/C++ example src/snes/tutorials/ex19 run successfully with HYPRE"; \

           else  \

@@ -57,6 +61,7 @@ runex19_hypre:

           ${RM} -f ex19_1.tmp

 runex19_hypre_cuda:

 	-@${MPIEXEC} -n 2 ${MPIEXEC_TAIL} ./ex19 -dm_vec_type cuda -dm_mat_type aijcusparse -da_refine 3 -snes_monitor_short -ksp_norm_type unpreconditioned -pc_type hypre > ex19_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_1.tmp; \

 	   if (${DIFF} output/ex19_hypre.out ex19_1.tmp) then \

            echo "C/C++ example src/snes/tutorials/ex19 run successfully with HYPRE/CUDA"; \

            else  \

@@ -66,6 +71,7 @@ runex19_hypre_cuda:

 	   ${RM} -f ex19_1.tmp

 runex19_hypre_hip:

 	-@${MPIEXEC} -n 2 ${MPIEXEC_TAIL} ./ex19 -dm_vec_type hip -da_refine 3 -snes_monitor_short -ksp_norm_type unpreconditioned -pc_type hypre > ex19_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_1.tmp; \

 	   if (${DIFF} output/ex19_hypre.out ex19_1.tmp) then \

            echo "C/C++ example src/snes/tutorials/ex19 run successfully with HYPRE/HIP"; \

            else \

@@ -75,6 +81,7 @@ runex19_hypre_hip:

 	   ${RM} -f ex19_1.tmp

 runex19_cuda:

 	-@${MPIEXEC} -n 1 ${MPIEXEC_TAIL} ./ex19 -snes_monitor -dm_mat_type seqaijcusparse -dm_vec_type seqcuda -pc_type gamg -ksp_monitor -mg_levels_ksp_max_it 1 > ex19_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_1.tmp; \

 	   if (${DIFF} output/ex19_cuda_1.out ex19_1.tmp) then \

            echo "C/C++ example src/snes/tutorials/ex19 run successfully with CUDA"; \

            else  \

@@ -84,6 +91,7 @@ runex19_cuda:

 	   ${RM} -f ex19_1.tmp

 runex19_ml:

 	-@${MPIEXEC} -n 2 ${MPIEXEC_TAIL} ./ex19 -da_refine 3 -snes_monitor_short -pc_type ml > ex19_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_1.tmp; \

 	   if (${DIFF} output/ex19_ml.out ex19_1.tmp) then  \

            echo "C/C++ example src/snes/tutorials/ex19 run successfully with ML"; \

            else \

@@ -93,6 +101,7 @@ runex19_ml:

            ${RM} -f ex19_1.tmp

 runex19_fieldsplit_mumps:

 	-@${MPIEXEC} -n 2 ${MPIEXEC_TAIL} ./ex19 -pc_type fieldsplit -pc_fieldsplit_block_size 4 -pc_fieldsplit_type SCHUR -pc_fieldsplit_0_fields 0,1,2 -pc_fieldsplit_1_fields 3 -fieldsplit_0_pc_type lu -fieldsplit_1_pc_type lu -snes_monitor_short -ksp_monitor_short  -fieldsplit_0_pc_factor_mat_solver_type mumps -fieldsplit_1_pc_factor_mat_solver_type mumps > ex19_6.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_6.tmp; \

 	   if (${DIFF} output/ex19_fieldsplit_5.out ex19_6.tmp) then  \

            echo "C/C++ example src/snes/tutorials/ex19 run successfully with MUMPS"; \

            else  \

@@ -102,6 +111,7 @@ runex19_fieldsplit_mumps:

            ${RM} -f ex19_6.tmp

 runex19_superlu_dist:

 	-@${MPIEXEC} -n 1 ${MPIEXEC_TAIL} ./ex19 -da_grid_x 20 -da_grid_y 20 -pc_type lu -pc_factor_mat_solver_type superlu_dist > ex19.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19.tmp; \

 	   if (${DIFF} output/ex19_superlu.out ex19.tmp) then \

            echo "C/C++ example src/snes/tutorials/ex19 run successfully with SuperLU_DIST"; \

            else  \

@@ -111,6 +121,7 @@ runex19_superlu_dist:

 	   ${RM} -f ex19.tmp

 runex19_suitesparse:

 	-@${MPIEXEC} -n 1 ${MPIEXEC_TAIL} ./ex19 -da_refine 3 -snes_monitor_short -pc_type lu -pc_factor_mat_solver_type umfpack > ex19_1.tmp 2>&1; \

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex19_1.tmp; \

 	   if (${DIFF} output/ex19_suitesparse.out ex19_1.tmp) then \

            echo "C/C++ example src/snes/tutorials/ex19 run successfully with SuiteSparse"; \

            else \

@@ -120,6 +131,7 @@ runex19_suitesparse:

 	   ${RM} -f ex19_1.tmp

 runex3k_kokkos: ex3k.PETSc

 	-@OMP_PROC_BIND=false ${MPIEXEC} -n 2 ${MPIEXEC_TAIL} ./ex3k -view_initial -dm_vec_type kokkos -dm_mat_type aijkokkos -use_gpu_aware_mpi 0 -snes_monitor > ex3k_1.tmp 2>&1 ;\

+        sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex3k_1.tmp; \

 	if (${DIFF} output/ex3k_1.out ex3k_1.tmp) then \

           echo "C/C++ example src/snes/tutorials/ex3k run successfully with Kokkos Kernels"; \

         else \

diff --git a/src/vec/vec/tests/makefile b/src/vec/vec/tests/makefile

index d1f047820ec..aab400535dd 100644

--- a/src/vec/vec/tests/makefile

+++ b/src/vec/vec/tests/makefile

@@ -5,6 +5,7 @@ include ${PETSC_DIR}/lib/petsc/conf/rules

 runex47: ex47.PETSc

 	-@H5OUT=`mktemp -t petsc.h5.XXXXXX`; ${MPIEXEC} -n 1 ${MPIEXEC_TAIL} ./ex47 -filename $${H5OUT} > ex47_1.tmp 2>&1; \

+       sed -i '/hwloc\/linux/d ; /ERROR scandir(\/sys\/class\/net) failed/d ; /ERROR opendir(\/sys\/class\/net) failed/d' ex47_1.tmp; \

 	   if (${DIFF} output/ex47_1.out ex47_1.tmp) then \

              echo "C/C++ example src/vec/vec/tests/ex47 run successfully with HDF5"; \

            else \

  lapack,

  mpiSupport ? true,

  mpi, # generic mpi dependency

  mpiCheckPhaseHook,

  openssh, # required for openmpi tests

  petsc-withp4est ? false,

  hdf5-support ? false,

      --replace /usr/bin/install_name_tool ${cctools}/bin/install_name_tool

  '';

  # Both OpenMPI and MPICH get confused by the sandbox environment and spew errors like this (both to stdout and stderr):

  #     [hwloc/linux] failed to find sysfs cpu topology directory, aborting linux discovery.

  #     [1684747490.391106] [localhost:14258:0]       tcp_iface.c:837  UCX  ERROR opendir(/sys/class/net) failed: No such file or directory

  # These messages contaminate test output, which makes the quicktest suite to fail. The patch adds filtering for these messages.

  patches = [ ./filter_mpi_warnings.patch ];

  configureFlags = [

    "--with-blas=1"

    "--with-lapack=1"

  # the library is installed and available.

  doInstallCheck = true;

  installCheckTarget = "check_install";

  nativeInstallCheckInputs = [ mpiCheckPhaseHook ];

  passthru = {

    inherit mpiSupport;