/****************************************************************************
**
** This file is part of a Qt Solutions component.
**
** Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).
**
** Contact: Qt Software Information (qt-info@nokia.com)
**
** Commercial Usage
** Licensees holding valid Qt Commercial licenses may use this file in
** accordance with the Qt Solutions Commercial License Agreement provided
** with the Software or, alternatively, in accordance with the terms
** contained in a written agreement between you and Nokia.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain
** additional rights. These rights are described in the Nokia Qt LGPL
** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
** package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
** Please note Third Party Software included with Qt Solutions may impose
** additional restrictions and it is the user's responsibility to ensure
** that they have met the licensing requirements of the GPL, LGPL, or Qt
** Solutions Commercial license and the relevant license of the Third
** Party Software they are using.
**
** If you are unsure which license is appropriate for your use, please
** contact the sales department at qt-sales@nokia.com.
**
****************************************************************************/
/****************************************************************************
**
** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
** Contact: Qt Software Information (qt-info@nokia.com)
**
** This file is part of the tools applications of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the either Technology Preview License Agreement or the
** Beta Release License Agreement.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain
** additional rights. These rights are described in the Nokia Qt LGPL
** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
** package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
** If you are unsure which license is appropriate for your use, please
** contact the sales department at qt-sales@nokia.com.
** $QT_END_LICENSE$
**
****************************************************************************/
#include "MantidQtWidgets/Common/QtPropertyBrowser/qtpropertymanager.h"
#include "MantidQtWidgets/Common/QtPropertyBrowser/qtpropertybrowserutils_p.h"
#include <QtCore/QDateTime>
#include <QtCore/QLocale>
#include <QtCore/QMap>
#include <QtCore/QTimer>
#include <QtGui/QIcon>
#include <QtCore/QMetaEnum>
#include <QtGui/QFontDatabase>
#include <QtGui/QStyleOption>
#include <QtGui/QStyle>
#include <QtGui/QApplication>
#include <QtGui/QPainter>
#include <QtGui/QLabel>
#include <limits.h>
#include <float.h>
#include <math.h>
#if defined(Q_CC_MSVC)
# pragma warning(disable: 4786) /* MS VS 6: truncating debug info after 255 characters */
#endif
#if QT_VERSION >= 0x040400
QT_BEGIN_NAMESPACE
#endif
// Match the exact signature of qBound for VS 6.
QSize qBound(QSize minVal, QSize val, QSize maxVal)
{
return qBoundSize(minVal, val, maxVal);
}
QSizeF qBound(QSizeF minVal, QSizeF val, QSizeF maxVal)
{
return qBoundSize(minVal, val, maxVal);
}
class QtMetaEnumProvider
{
public:
QtMetaEnumProvider();
QStringList policyEnumNames() const { return m_policyEnumNames; }
QStringList languageEnumNames() const { return m_languageEnumNames; }
QStringList countryEnumNames(QLocale::Language language) const { return m_countryEnumNames.value(language); }
QSizePolicy::Policy indexToSizePolicy(int index) const;
int sizePolicyToIndex(QSizePolicy::Policy policy) const;
void indexToLocale(int languageIndex, int countryIndex, QLocale::Language *language, QLocale::Country *country) const;
void localeToIndex(QLocale::Language language, QLocale::Country country, int *languageIndex, int *countryIndex) const;
private:
void initLocale();
QStringList m_policyEnumNames;
QStringList m_languageEnumNames;
QMap<QLocale::Language, QStringList> m_countryEnumNames;
QMap<int, QLocale::Language> m_indexToLanguage;
QMap<QLocale::Language, int> m_languageToIndex;
QMap<int, QMap<int, QLocale::Country> > m_indexToCountry;
QMap<QLocale::Language, QMap<QLocale::Country, int> > m_countryToIndex;
QMetaEnum m_policyEnum;
};
#if QT_VERSION < 0x040300
static QList<QLocale::Country> countriesForLanguage(QLocale::Language language)
{
QList<QLocale::Country> countries;
QLocale::Country country = QLocale::AnyCountry;
while (country <= QLocale::LastCountry) {
QLocale locale(language, country);
if (locale.language() == language && !countries.contains(locale.country()))
countries << locale.country();
country = (QLocale::Country)((uint)country + 1); // ++country
}
return countries;
}
#endif
static QList<QLocale::Country> sortCountries(const QList<QLocale::Country> &countries)
{
QMultiMap<QString, QLocale::Country> nameToCountry;
QListIterator<QLocale::Country> itCountry(countries);
while (itCountry.hasNext()) {
QLocale::Country country = itCountry.next();
nameToCountry.insert(QLocale::countryToString(country), country);
}
return nameToCountry.values();
}
void QtMetaEnumProvider::initLocale()
{
QMultiMap<QString, QLocale::Language> nameToLanguage;
QLocale::Language language = QLocale::C;
while (language <= QLocale::LastLanguage) {
QLocale locale(language);
if (locale.language() == language)
nameToLanguage.insert(QLocale::languageToString(language), language);
language = (QLocale::Language)((uint)language + 1); // ++language
}
const QLocale system = QLocale::system();
if (!nameToLanguage.contains(QLocale::languageToString(system.language())))
nameToLanguage.insert(QLocale::languageToString(system.language()), system.language());
QList<QLocale::Language> languages = nameToLanguage.values();
QListIterator<QLocale::Language> itLang(languages);
while (itLang.hasNext()) {
QLocale::Language language = itLang.next();
QList<QLocale::Country> countries;
#if QT_VERSION < 0x040300
countries = countriesForLanguage(language);
#else
countries = QLocale::countriesForLanguage(language);
#endif
if (countries.isEmpty() && language == system.language())
countries << system.country();
if (!countries.isEmpty() && !m_languageToIndex.contains(language)) {
countries = sortCountries(countries);
int langIdx = m_languageEnumNames.count();
m_indexToLanguage[langIdx] = language;
m_languageToIndex[language] = langIdx;
QStringList countryNames;
QListIterator<QLocale::Country> it(countries);
int countryIdx = 0;
while (it.hasNext()) {
QLocale::Country country = it.next();
countryNames << QLocale::countryToString(country);
m_indexToCountry[langIdx][countryIdx] = country;
m_countryToIndex[language][country] = countryIdx;
++countryIdx;
}
m_languageEnumNames << QLocale::languageToString(language);
m_countryEnumNames[language] = countryNames;
}
}
}
QtMetaEnumProvider::QtMetaEnumProvider()
{
QMetaProperty p;
p = QtMetaEnumWrapper::staticMetaObject.property(
QtMetaEnumWrapper::staticMetaObject.propertyOffset() + 0);
m_policyEnum = p.enumerator();
const int keyCount = m_policyEnum.keyCount();
for (int i = 0; i < keyCount; i++)
m_policyEnumNames << QLatin1String(m_policyEnum.key(i));
initLocale();
}
QSizePolicy::Policy QtMetaEnumProvider::indexToSizePolicy(int index) const
{
return static_cast<QSizePolicy::Policy>(m_policyEnum.value(index));
}
int QtMetaEnumProvider::sizePolicyToIndex(QSizePolicy::Policy policy) const
{
const int keyCount = m_policyEnum.keyCount();
for (int i = 0; i < keyCount; i++)
if (indexToSizePolicy(i) == policy)
return i;
return -1;
}
void QtMetaEnumProvider::indexToLocale(int languageIndex, int countryIndex, QLocale::Language *language, QLocale::Country *country) const
{
QLocale::Language l = QLocale::C;
QLocale::Country c = QLocale::AnyCountry;
if (m_indexToLanguage.contains(languageIndex)) {
l = m_indexToLanguage[languageIndex];
if (m_indexToCountry.contains(languageIndex) && m_indexToCountry[languageIndex].contains(countryIndex))
c = m_indexToCountry[languageIndex][countryIndex];
}
if (language)
*language = l;
if (country)
*country = c;
}
void QtMetaEnumProvider::localeToIndex(QLocale::Language language, QLocale::Country country, int *languageIndex, int *countryIndex) const
{
int l = -1;
int c = -1;
if (m_languageToIndex.contains(language)) {
l = m_languageToIndex[language];
if (m_countryToIndex.contains(language) && m_countryToIndex[language].contains(country))
c = m_countryToIndex[language][country];
}
if (languageIndex)
*languageIndex = l;
if (countryIndex)
*countryIndex = c;
}
Q_GLOBAL_STATIC(QtMetaEnumProvider, metaEnumProvider)
// QtGroupPropertyManager
/**
\class QtGroupPropertyManager
\brief The QtGroupPropertyManager provides and manages group properties.
This class is intended to provide a grouping element without any value.
\sa QtAbstractPropertyManager
*/
/**
Creates a manager with the given \a parent.
*/
QtGroupPropertyManager::QtGroupPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
}
/**
Destroys this manager, and all the properties it has created.
*/
QtGroupPropertyManager::~QtGroupPropertyManager()
{
}
/**
\reimp
*/
bool QtGroupPropertyManager::hasValue(const QtProperty *property) const
{
Q_UNUSED(property)
return false;
}
/**
\reimp
*/
void QtGroupPropertyManager::initializeProperty(QtProperty *property)
{
Q_UNUSED(property)
}
/**
\reimp
*/
void QtGroupPropertyManager::uninitializeProperty(QtProperty *property)
{
Q_UNUSED(property)
}
// QtIntPropertyManager
class QtIntPropertyManagerPrivate
{
QtIntPropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtIntPropertyManager)
public:
struct Data
{
Data() : val(0), minVal(-INT_MAX), maxVal(INT_MAX), singleStep(1) {}
int val;
int minVal;
int maxVal;
int singleStep;
int minimumValue() const { return minVal; }
int maximumValue() const { return maxVal; }
void setMinimumValue(int newMinVal) { setSimpleMinimumData(this, newMinVal); }
void setMaximumValue(int newMaxVal) { setSimpleMaximumData(this, newMaxVal); }
};
typedef QMap<const QtProperty *, Data> PropertyValueMap;
PropertyValueMap m_values;
};
/**
\class QtIntPropertyManager
\brief The QtIntPropertyManager provides and manages int properties.
An int property has a current value, and a range specifying the
valid values. The range is defined by a minimum and a maximum
value.
The property's value and range can be retrieved using the value(),
minimum() and maximum() functions, and can be set using the
setValue(), setMinimum() and setMaximum() slots. Alternatively,
the range can be defined in one go using the setRange() slot.
In addition, QtIntPropertyManager provides the valueChanged() signal which
is emitted whenever a property created by this manager changes,
and the rangeChanged() signal which is emitted whenever such a
property changes its range of valid values.
\sa QtAbstractPropertyManager, QtSpinBoxFactory, QtSliderFactory, QtScrollBarFactory
*/
/**
\fn void QtIntPropertyManager::valueChanged(QtProperty *property, int value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtIntPropertyManager::rangeChanged(QtProperty *property, int minimum, int maximum)
This signal is emitted whenever a property created by this manager
changes its range of valid values, passing a pointer to the
\a property and the new \a minimum and \a maximum values.
\sa setRange()
*/
/**
\fn void QtIntPropertyManager::singleStepChanged(QtProperty *property, int step)
This signal is emitted whenever a property created by this manager
changes its single step property, passing a pointer to the
\a property and the new \a step value
\sa setSingleStep()
*/
/**
Creates a manager with the given \a parent.
*/
QtIntPropertyManager::QtIntPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtIntPropertyManagerPrivate;
d_ptr->q_ptr = this;
}
/**
Destroys this manager, and all the properties it has created.
*/
QtIntPropertyManager::~QtIntPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given property is not managed by this manager, this
function returns 0.
\sa setValue()
*/
int QtIntPropertyManager::value(const QtProperty *property) const
{
return getValue<int>(d_ptr->m_values, property, 0);
}
/**
Returns the given \a property's minimum value.
\sa setMinimum(), maximum(), setRange()
*/
int QtIntPropertyManager::minimum(const QtProperty *property) const
{
return getMinimum<int>(d_ptr->m_values, property, 0);
}
/**
Returns the given \a property's maximum value.
\sa setMaximum(), minimum(), setRange()
*/
int QtIntPropertyManager::maximum(const QtProperty *property) const
{
return getMaximum<int>(d_ptr->m_values, property, 0);
}
/**
Returns the given \a property's step value.
The step is typically used to increment or decrement a property value while pressing an arrow key.
\sa setSingleStep()
*/
int QtIntPropertyManager::singleStep(const QtProperty *property) const
{
return getData<int>(d_ptr->m_values, &QtIntPropertyManagerPrivate::Data::singleStep, property, 0);
}
/**
\reimp
*/
QString QtIntPropertyManager::valueText(const QtProperty *property) const
{
const QtIntPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return QString::number(it.value().val);
}
/**
\fn void QtIntPropertyManager::setValue(QtProperty *property, int value)
Sets the value of the given \a property to \a value.
If the specified \a value is not valid according to the given \a
property's range, the \a value is adjusted to the nearest valid
value within the range.
\sa value(), setRange(), valueChanged()
*/
void QtIntPropertyManager::setValue(QtProperty *property, int val)
{
void (QtIntPropertyManagerPrivate::*setSubPropertyValue)(QtProperty *, int) = 0;
setValueInRange<int, QtIntPropertyManagerPrivate, QtIntPropertyManager, int>(this, d_ptr,
&QtIntPropertyManager::propertyChanged,
&QtIntPropertyManager::valueChanged,
property, val, setSubPropertyValue);
}
/**
Sets the minimum value for the given \a property to \a minVal.
When setting the minimum value, the maximum and current values are
adjusted if necessary (ensuring that the range remains valid and
that the current value is within the range).
\sa minimum(), setRange(), rangeChanged()
*/
void QtIntPropertyManager::setMinimum(QtProperty *property, int minVal)
{
setMinimumValue<int, QtIntPropertyManagerPrivate, QtIntPropertyManager, int, QtIntPropertyManagerPrivate::Data>(this, d_ptr,
&QtIntPropertyManager::propertyChanged,
&QtIntPropertyManager::valueChanged,
&QtIntPropertyManager::rangeChanged,
property, minVal);
}
/**
Sets the maximum value for the given \a property to \a maxVal.
When setting maximum value, the minimum and current values are
adjusted if necessary (ensuring that the range remains valid and
that the current value is within the range).
\sa maximum(), setRange(), rangeChanged()
*/
void QtIntPropertyManager::setMaximum(QtProperty *property, int maxVal)
{
setMaximumValue<int, QtIntPropertyManagerPrivate, QtIntPropertyManager, int, QtIntPropertyManagerPrivate::Data>(this, d_ptr,
&QtIntPropertyManager::propertyChanged,
&QtIntPropertyManager::valueChanged,
&QtIntPropertyManager::rangeChanged,
property, maxVal);
}
/**
\fn void QtIntPropertyManager::setRange(QtProperty *property, int minimum, int maximum)
Sets the range of valid values.
This is a convenience function defining the range of valid values
in one go; setting the \a minimum and \a maximum values for the
given \a property with a single function call.
When setting a new range, the current value is adjusted if
necessary (ensuring that the value remains within range).
\sa setMinimum(), setMaximum(), rangeChanged()
*/
void QtIntPropertyManager::setRange(QtProperty *property, int minVal, int maxVal)
{
void (QtIntPropertyManagerPrivate::*setSubPropertyRange)(QtProperty *, int, int, int) = 0;
setBorderValues<int, QtIntPropertyManagerPrivate, QtIntPropertyManager, int>(this, d_ptr,
&QtIntPropertyManager::propertyChanged,
&QtIntPropertyManager::valueChanged,
&QtIntPropertyManager::rangeChanged,
property, minVal, maxVal, setSubPropertyRange);
}
/**
Sets the step value for the given \a property to \a step.
The step is typically used to increment or decrement a property value while pressing an arrow key.
\sa singleStep()
*/
void QtIntPropertyManager::setSingleStep(QtProperty *property, int step)
{
const QtIntPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtIntPropertyManagerPrivate::Data data = it.value();
if (step < 0)
step = 0;
if (data.singleStep == step)
return;
data.singleStep = step;
it.value() = data;
emit singleStepChanged(property, data.singleStep);
}
/**
\reimp
*/
void QtIntPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtIntPropertyManagerPrivate::Data();
}
/**
\reimp
*/
void QtIntPropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtDoublePropertyManager
class QtDoublePropertyManagerPrivate
{
QtDoublePropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtDoublePropertyManager)
public:
struct Data
{
Data() : val(0), minVal(-INT_MAX), maxVal(INT_MAX), singleStep(1), decimals(2) {}
double val;
double minVal;
double maxVal;
double singleStep;
int decimals;
double minimumValue() const { return minVal; }
double maximumValue() const { return maxVal; }
void setMinimumValue(double newMinVal) { setSimpleMinimumData(this, newMinVal); }
void setMaximumValue(double newMaxVal) { setSimpleMaximumData(this, newMaxVal); }
};
typedef QMap<const QtProperty *, Data> PropertyValueMap;
PropertyValueMap m_values;
};
/**
\class QtDoublePropertyManager
\brief The QtDoublePropertyManager provides and manages double properties.
A double property has a current value, and a range specifying the
valid values. The range is defined by a minimum and a maximum
value.
The property's value and range can be retrieved using the value(),
minimum() and maximum() functions, and can be set using the
setValue(), setMinimum() and setMaximum() slots.
Alternatively, the range can be defined in one go using the
setRange() slot.
In addition, QtDoublePropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes, and the rangeChanged() signal which is emitted whenever
such a property changes its range of valid values.
\sa QtAbstractPropertyManager, QtDoubleSpinBoxFactory
*/
/**
\fn void QtDoublePropertyManager::valueChanged(QtProperty *property, double value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtDoublePropertyManager::rangeChanged(QtProperty *property, double minimum, double maximum)
This signal is emitted whenever a property created by this manager
changes its range of valid values, passing a pointer to the
\a property and the new \a minimum and \a maximum values
\sa setRange()
*/
/**
\fn void QtDoublePropertyManager::decimalsChanged(QtProperty *property, int prec)
This signal is emitted whenever a property created by this manager
changes its precision of value, passing a pointer to the
\a property and the new \a prec value
\sa setDecimals()
*/
/**
\fn void QtDoublePropertyManager::singleStepChanged(QtProperty *property, double step)
This signal is emitted whenever a property created by this manager
changes its single step property, passing a pointer to the
\a property and the new \a step value
\sa setSingleStep()
*/
/**
Creates a manager with the given \a parent.
*/
QtDoublePropertyManager::QtDoublePropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtDoublePropertyManagerPrivate;
d_ptr->q_ptr = this;
}
/**
Destroys this manager, and all the properties it has created.
*/
QtDoublePropertyManager::~QtDoublePropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given property is not managed by this manager, this
function returns 0.
\sa setValue()
*/
double QtDoublePropertyManager::value(const QtProperty *property) const
{
return getValue<double>(d_ptr->m_values, property, 0.0);
}
/**
Returns the given \a property's minimum value.
\sa maximum(), setRange()
*/
double QtDoublePropertyManager::minimum(const QtProperty *property) const
{
return getMinimum<double>(d_ptr->m_values, property, 0.0);
}
/**
Returns the given \a property's maximum value.
\sa minimum(), setRange()
*/
double QtDoublePropertyManager::maximum(const QtProperty *property) const
{
return getMaximum<double>(d_ptr->m_values, property, 0.0);
}
/**
Returns the given \a property's step value.
The step is typically used to increment or decrement a property value while pressing an arrow key.
\sa setSingleStep()
*/
double QtDoublePropertyManager::singleStep(const QtProperty *property) const
{
return getData<double>(d_ptr->m_values, &QtDoublePropertyManagerPrivate::Data::singleStep, property, 0);
}
/**
Returns the given \a property's precision, in decimals.
\sa setDecimals()
*/
int QtDoublePropertyManager::decimals(const QtProperty *property) const
{
return getData<int>(d_ptr->m_values, &QtDoublePropertyManagerPrivate::Data::decimals, property, 0);
}
/**
\reimp
*/
QString QtDoublePropertyManager::valueText(const QtProperty *property) const
{
const QtDoublePropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
double absVal = fabs(it.value().val);
char format = absVal > 1e5 || (absVal != 0 && absVal < 1e-5) ? 'e' : 'f';
return QString::number(it.value().val,format , it.value().decimals);
}
/**
\fn void QtDoublePropertyManager::setValue(QtProperty *property, double value)
Sets the value of the given \a property to \a value.
If the specified \a value is not valid according to the given
\a property's range, the \a value is adjusted to the nearest valid value
within the range.
\sa value(), setRange(), valueChanged()
*/
void QtDoublePropertyManager::setValue(QtProperty *property, double val)
{
void (QtDoublePropertyManagerPrivate::*setSubPropertyValue)(QtProperty *, double) = 0;
setValueInRange<double, QtDoublePropertyManagerPrivate, QtDoublePropertyManager, double>(this, d_ptr,
&QtDoublePropertyManager::propertyChanged,
&QtDoublePropertyManager::valueChanged,
property, val, setSubPropertyValue);
}
/**
Sets the step value for the given \a property to \a step.
The step is typically used to increment or decrement a property value while pressing an arrow key.
\sa singleStep()
*/
void QtDoublePropertyManager::setSingleStep(QtProperty *property, double step)
{
const QtDoublePropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtDoublePropertyManagerPrivate::Data data = it.value();
if (step < 0)
step = 0;
if (data.singleStep == step)
return;
data.singleStep = step;
it.value() = data;
emit singleStepChanged(property, data.singleStep);
}
/**
\fn void QtDoublePropertyManager::setDecimals(QtProperty *property, int prec)
Sets the precision of the given \a property to \a prec.
The valid decimal range is 0-13. The default is 2.
\sa decimals()
*/
void QtDoublePropertyManager::setDecimals(QtProperty *property, int prec)
{
const QtDoublePropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtDoublePropertyManagerPrivate::Data data = it.value();
if (prec > 13)
prec = 13;
else if (prec < 0)
prec = 0;
if (data.decimals == prec)
return;
data.decimals = prec;
it.value() = data;
emit decimalsChanged(property, data.decimals);
}
/**
Sets the minimum value for the given \a property to \a minVal.
When setting the minimum value, the maximum and current values are
adjusted if necessary (ensuring that the range remains valid and
that the current value is within in the range).
\sa minimum(), setRange(), rangeChanged()
*/
void QtDoublePropertyManager::setMinimum(QtProperty *property, double minVal)
{
setMinimumValue<double, QtDoublePropertyManagerPrivate, QtDoublePropertyManager, double, QtDoublePropertyManagerPrivate::Data>(this, d_ptr,
&QtDoublePropertyManager::propertyChanged,
&QtDoublePropertyManager::valueChanged,
&QtDoublePropertyManager::rangeChanged,
property, minVal);
}
/**
Sets the maximum value for the given \a property to \a maxVal.
When setting the maximum value, the minimum and current values are
adjusted if necessary (ensuring that the range remains valid and
that the current value is within in the range).
\sa maximum(), setRange(), rangeChanged()
*/
void QtDoublePropertyManager::setMaximum(QtProperty *property, double maxVal)
{
setMaximumValue<double, QtDoublePropertyManagerPrivate, QtDoublePropertyManager, double, QtDoublePropertyManagerPrivate::Data>(this, d_ptr,
&QtDoublePropertyManager::propertyChanged,
&QtDoublePropertyManager::valueChanged,
&QtDoublePropertyManager::rangeChanged,
property, maxVal);
}
/**
\fn void QtDoublePropertyManager::setRange(QtProperty *property, double minimum, double maximum)
Sets the range of valid values.
This is a convenience function defining the range of valid values
in one go; setting the \a minimum and \a maximum values for the
given \a property with a single function call.
When setting a new range, the current value is adjusted if
necessary (ensuring that the value remains within range).
\sa setMinimum(), setMaximum(), rangeChanged()
*/
void QtDoublePropertyManager::setRange(QtProperty *property, double minVal, double maxVal)
{
void (QtDoublePropertyManagerPrivate::*setSubPropertyRange)(QtProperty *, double, double, double) = 0;
setBorderValues<double, QtDoublePropertyManagerPrivate, QtDoublePropertyManager, double>(this, d_ptr,
&QtDoublePropertyManager::propertyChanged,
&QtDoublePropertyManager::valueChanged,
&QtDoublePropertyManager::rangeChanged,
property, minVal, maxVal, setSubPropertyRange);
}
/**
\reimp
*/
void QtDoublePropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtDoublePropertyManagerPrivate::Data();
}
/**
\reimp
*/
void QtDoublePropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtStringPropertyManager
class QtStringPropertyManagerPrivate
{
QtStringPropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtStringPropertyManager)
public:
struct Data
{
Data() : regExp(QString(QLatin1Char('*')), Qt::CaseSensitive, QRegExp::Wildcard)
{
}
QString val;
QRegExp regExp;
};
typedef QMap<const QtProperty *, Data> PropertyValueMap;
QMap<const QtProperty *, Data> m_values;
};
/**
\class QtStringPropertyManager
\brief The QtStringPropertyManager provides and manages QString properties.
A string property's value can be retrieved using the value()
function, and set using the setValue() slot.
The current value can be checked against a regular expression. To
set the regular expression use the setRegExp() slot, use the
regExp() function to retrieve the currently set expression.
In addition, QtStringPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes, and the regExpChanged() signal which is emitted whenever
such a property changes its currently set regular expression.
\sa QtAbstractPropertyManager, QtLineEditFactory
*/
/**
\fn void QtStringPropertyManager::valueChanged(QtProperty *property, const QString &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the
new \a value as parameters.
\sa setValue()
*/
/**
\fn void QtStringPropertyManager::regExpChanged(QtProperty *property, const QRegExp ®Exp)
This signal is emitted whenever a property created by this manager
changes its currenlty set regular expression, passing a pointer to
the \a property and the new \a regExp as parameters.
\sa setRegExp()
*/
/**
Creates a manager with the given \a parent.
*/
QtStringPropertyManager::QtStringPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtStringPropertyManagerPrivate;
d_ptr->q_ptr = this;
}
/**
Destroys this manager, and all the properties it has created.
*/
QtStringPropertyManager::~QtStringPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given property is not managed by this manager, this
function returns an empty string.
\sa setValue()
*/
QString QtStringPropertyManager::value(const QtProperty *property) const
{
return getValue<QString>(d_ptr->m_values, property);
}
/**
Returns the given \a property's currently set regular expression.
If the given \a property is not managed by this manager, this
function returns an empty expression.
\sa setRegExp()
*/
QRegExp QtStringPropertyManager::regExp(const QtProperty *property) const
{
return getData<QRegExp>(d_ptr->m_values, &QtStringPropertyManagerPrivate::Data::regExp, property, QRegExp());
}
/**
\reimp
*/
QString QtStringPropertyManager::valueText(const QtProperty *property) const
{
const QtStringPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return it.value().val;
}
/**
\fn void QtStringPropertyManager::setValue(QtProperty *property, const QString &value)
Sets the value of the given \a property to \a value.
If the specified \a value doesn't match the given \a property's
regular expression, this function does nothing.
\sa value(), setRegExp(), valueChanged()
*/
void QtStringPropertyManager::setValue(QtProperty *property, const QString &val)
{
const QtStringPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtStringPropertyManagerPrivate::Data data = it.value();
if (data.val == val)
return;
if (data.regExp.isValid() && !data.regExp.exactMatch(val))
return;
data.val = val;
it.value() = data;
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
Sets the regular expression of the given \a property to \a regExp.
\sa regExp(), setValue(), regExpChanged()
*/
void QtStringPropertyManager::setRegExp(QtProperty *property, const QRegExp ®Exp)
{
const QtStringPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtStringPropertyManagerPrivate::Data data = it.value() ;
if (data.regExp == regExp)
return;
data.regExp = regExp;
it.value() = data;
emit regExpChanged(property, data.regExp);
}
/**
\reimp
*/
void QtStringPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtStringPropertyManagerPrivate::Data();
}
/**
\reimp
*/
void QtStringPropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtBoolPropertyManager
class QtBoolPropertyManagerPrivate
{
QtBoolPropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtBoolPropertyManager)
public:
QMap<const QtProperty *, bool> m_values;
};
/**
\class QtBoolPropertyManager
\brief The QtBoolPropertyManager class provides and manages boolean properties.
The property's value can be retrieved using the value() function,
and set using the setValue() slot.
In addition, QtBoolPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes.
\sa QtAbstractPropertyManager, QtCheckBoxFactory
*/
/**
\fn void QtBoolPropertyManager::valueChanged(QtProperty *property, bool value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the
new \a value as parameters.
*/
/**
Creates a manager with the given \a parent.
*/
QtBoolPropertyManager::QtBoolPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtBoolPropertyManagerPrivate;
d_ptr->q_ptr = this;
}
/**
Destroys this manager, and all the properties it has created.
*/
QtBoolPropertyManager::~QtBoolPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by \e this manager, this
function returns false.
\sa setValue()
*/
bool QtBoolPropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, false);
}
/**
\reimp
*/
QString QtBoolPropertyManager::valueText(const QtProperty *property) const
{
const QMap<const QtProperty *, bool>::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
static const QString trueText = tr("True");
static const QString falseText = tr("False");
return it.value() ? trueText : falseText;
}
// Return an icon containing a check box indicator
static QIcon drawCheckBox(bool value)
{
QStyleOptionButton opt;
opt.state |= value ? QStyle::State_On : QStyle::State_Off;
opt.state |= QStyle::State_Enabled;
const QStyle *style = QApplication::style();
// Figure out size of an indicator and make sure it is not scaled down in a list view item
// by making the pixmap as big as a list view icon and centering the indicator in it.
// (if it is smaller, it can't be helped)
const int indicatorWidth = style->pixelMetric(QStyle::PM_IndicatorWidth, &opt);
const int indicatorHeight = style->pixelMetric(QStyle::PM_IndicatorHeight, &opt);
const int listViewIconSize = indicatorWidth;
const int pixmapWidth = indicatorWidth;
const int pixmapHeight = qMax(indicatorHeight, listViewIconSize);
opt.rect = QRect(0, 0, indicatorWidth, indicatorHeight);
QPixmap pixmap = QPixmap(pixmapWidth, pixmapHeight);
pixmap.fill(Qt::transparent);
{
// Center?
const int xoff = (pixmapWidth > indicatorWidth) ? (pixmapWidth - indicatorWidth) / 2 : 0;
const int yoff = (pixmapHeight > indicatorHeight) ? (pixmapHeight - indicatorHeight) / 2 : 0;
QPainter painter(&pixmap);
painter.translate(xoff, yoff);
style->drawPrimitive(QStyle::PE_IndicatorCheckBox, &opt, &painter);
}
return QIcon(pixmap);
}
/**
\reimp
*/
QIcon QtBoolPropertyManager::valueIcon(const QtProperty *property) const
{
const QMap<const QtProperty *, bool>::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QIcon();
static const QIcon checkedIcon = drawCheckBox(true);
static const QIcon uncheckedIcon = drawCheckBox(false);
return it.value() ? checkedIcon : uncheckedIcon;
}
/**
\fn void QtBoolPropertyManager::setValue(QtProperty *property, bool value)
Sets the value of the given \a property to \a value.
\sa value()
*/
void QtBoolPropertyManager::setValue(QtProperty *property, bool val)
{
setSimpleValue<bool, bool, QtBoolPropertyManager>(d_ptr->m_values, this,
&QtBoolPropertyManager::propertyChanged,
&QtBoolPropertyManager::valueChanged,
property, val);
}
/**
\reimp
*/
void QtBoolPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = false;
}
/**
\reimp
*/
void QtBoolPropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtDatePropertyManager
class QtDatePropertyManagerPrivate
{
QtDatePropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtDatePropertyManager)
public:
struct Data
{
Data() : val(QDate::currentDate()), minVal(QDate(1752, 9, 14)),
maxVal(QDate(7999, 12, 31)) {}
QDate val;
QDate minVal;
QDate maxVal;
QDate minimumValue() const { return minVal; }
QDate maximumValue() const { return maxVal; }
void setMinimumValue(const QDate &newMinVal) { setSimpleMinimumData(this, newMinVal); }
void setMaximumValue(const QDate &newMaxVal) { setSimpleMaximumData(this, newMaxVal); }
};
QString m_format;
typedef QMap<const QtProperty *, Data> PropertyValueMap;
QMap<const QtProperty *, Data> m_values;
};
/**
\class QtDatePropertyManager
\brief The QtDatePropertyManager provides and manages QDate properties.
A date property has a current value, and a range specifying the
valid dates. The range is defined by a minimum and a maximum
value.
The property's values can be retrieved using the minimum(),
maximum() and value() functions, and can be set using the
setMinimum(), setMaximum() and setValue() slots. Alternatively,
the range can be defined in one go using the setRange() slot.
In addition, QtDatePropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes, and the rangeChanged() signal which is emitted whenever
such a property changes its range of valid dates.
\sa QtAbstractPropertyManager, QtDateEditFactory, QtDateTimePropertyManager
*/
/**
\fn void QtDatePropertyManager::valueChanged(QtProperty *property, const QDate &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtDatePropertyManager::rangeChanged(QtProperty *property, const QDate &minimum, const QDate &maximum)
This signal is emitted whenever a property created by this manager
changes its range of valid dates, passing a pointer to the \a
property and the new \a minimum and \a maximum dates.
\sa setRange()
*/
/**
Creates a manager with the given \a parent.
*/
QtDatePropertyManager::QtDatePropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtDatePropertyManagerPrivate;
d_ptr->q_ptr = this;
QLocale loc;
d_ptr->m_format = loc.dateFormat(QLocale::ShortFormat);
}
/**
Destroys this manager, and all the properties it has created.
*/
QtDatePropertyManager::~QtDatePropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by \e this manager, this
function returns an invalid date.
\sa setValue()
*/
QDate QtDatePropertyManager::value(const QtProperty *property) const
{
return getValue<QDate>(d_ptr->m_values, property);
}
/**
Returns the given \a property's minimum date.
\sa maximum(), setRange()
*/
QDate QtDatePropertyManager::minimum(const QtProperty *property) const
{
return getMinimum<QDate>(d_ptr->m_values, property);
}
/**
Returns the given \a property's maximum date.
\sa minimum(), setRange()
*/
QDate QtDatePropertyManager::maximum(const QtProperty *property) const
{
return getMaximum<QDate>(d_ptr->m_values, property);
}
/**
\reimp
*/
QString QtDatePropertyManager::valueText(const QtProperty *property) const
{
const QtDatePropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return it.value().val.toString(d_ptr->m_format);
}
/**
\fn void QtDatePropertyManager::setValue(QtProperty *property, const QDate &value)
Sets the value of the given \a property to \a value.
If the specified \a value is not a valid date according to the
given \a property's range, the value is adjusted to the nearest
valid value within the range.
\sa value(), setRange(), valueChanged()
*/
void QtDatePropertyManager::setValue(QtProperty *property, const QDate &val)
{
void (QtDatePropertyManagerPrivate::*setSubPropertyValue)(QtProperty *, const QDate &) = 0;
setValueInRange<const QDate &, QtDatePropertyManagerPrivate, QtDatePropertyManager, const QDate>(this, d_ptr,
&QtDatePropertyManager::propertyChanged,
&QtDatePropertyManager::valueChanged,
property, val, setSubPropertyValue);
}
/**
Sets the minimum value for the given \a property to \a minVal.
When setting the minimum value, the maximum and current values are
adjusted if necessary (ensuring that the range remains valid and
that the current value is within in the range).
\sa minimum(), setRange()
*/
void QtDatePropertyManager::setMinimum(QtProperty *property, const QDate &minVal)
{
setMinimumValue<const QDate &, QtDatePropertyManagerPrivate, QtDatePropertyManager, QDate, QtDatePropertyManagerPrivate::Data>(this, d_ptr,
&QtDatePropertyManager::propertyChanged,
&QtDatePropertyManager::valueChanged,
&QtDatePropertyManager::rangeChanged,
property, minVal);
}
/**
Sets the maximum value for the given \a property to \a maxVal.
When setting the maximum value, the minimum and current
values are adjusted if necessary (ensuring that the range remains
valid and that the current value is within in the range).
\sa maximum(), setRange()
*/
void QtDatePropertyManager::setMaximum(QtProperty *property, const QDate &maxVal)
{
setMaximumValue<const QDate &, QtDatePropertyManagerPrivate, QtDatePropertyManager, QDate, QtDatePropertyManagerPrivate::Data>(this, d_ptr,
&QtDatePropertyManager::propertyChanged,
&QtDatePropertyManager::valueChanged,
&QtDatePropertyManager::rangeChanged,
property, maxVal);
}
/**
\fn void QtDatePropertyManager::setRange(QtProperty *property, const QDate &minimum, const QDate &maximum)
Sets the range of valid dates.
This is a convenience function defining the range of valid dates
in one go; setting the \a minimum and \a maximum values for the
given \a property with a single function call.
When setting a new date range, the current value is adjusted if
necessary (ensuring that the value remains in date range).
\sa setMinimum(), setMaximum(), rangeChanged()
*/
void QtDatePropertyManager::setRange(QtProperty *property, const QDate &minVal, const QDate &maxVal)
{
void (QtDatePropertyManagerPrivate::*setSubPropertyRange)(QtProperty *, const QDate &,
const QDate &, const QDate &) = 0;
setBorderValues<const QDate &, QtDatePropertyManagerPrivate, QtDatePropertyManager, QDate>(this, d_ptr,
&QtDatePropertyManager::propertyChanged,
&QtDatePropertyManager::valueChanged,
&QtDatePropertyManager::rangeChanged,
property, minVal, maxVal, setSubPropertyRange);
}
/**
\reimp
*/
void QtDatePropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtDatePropertyManagerPrivate::Data();
}
/**
\reimp
*/
void QtDatePropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtTimePropertyManager
class QtTimePropertyManagerPrivate
{
QtTimePropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtTimePropertyManager)
public:
QString m_format;
typedef QMap<const QtProperty *, QTime> PropertyValueMap;
PropertyValueMap m_values;
};
/**
\class QtTimePropertyManager
\brief The QtTimePropertyManager provides and manages QTime properties.
A time property's value can be retrieved using the value()
function, and set using the setValue() slot.
In addition, QtTimePropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes.
\sa QtAbstractPropertyManager, QtTimeEditFactory
*/
/**
\fn void QtTimePropertyManager::valueChanged(QtProperty *property, const QTime &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the
new \a value as parameters.
\sa setValue()
*/
/**
Creates a manager with the given \a parent.
*/
QtTimePropertyManager::QtTimePropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtTimePropertyManagerPrivate;
d_ptr->q_ptr = this;
QLocale loc;
d_ptr->m_format = loc.timeFormat(QLocale::ShortFormat);
}
/**
Destroys this manager, and all the properties it has created.
*/
QtTimePropertyManager::~QtTimePropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given property is not managed by this manager, this
function returns an invalid time object.
\sa setValue()
*/
QTime QtTimePropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QTime());
}
/**
\reimp
*/
QString QtTimePropertyManager::valueText(const QtProperty *property) const
{
const QtTimePropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return it.value().toString(d_ptr->m_format);
}
/**
\fn void QtTimePropertyManager::setValue(QtProperty *property, const QTime &value)
Sets the value of the given \a property to \a value.
\sa value(), valueChanged()
*/
void QtTimePropertyManager::setValue(QtProperty *property, const QTime &val)
{
setSimpleValue<const QTime &, QTime, QtTimePropertyManager>(d_ptr->m_values, this,
&QtTimePropertyManager::propertyChanged,
&QtTimePropertyManager::valueChanged,
property, val);
}
/**
\reimp
*/
void QtTimePropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QTime::currentTime();
}
/**
\reimp
*/
void QtTimePropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtDateTimePropertyManager
class QtDateTimePropertyManagerPrivate
{
QtDateTimePropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtDateTimePropertyManager)
public:
QString m_format;
typedef QMap<const QtProperty *, QDateTime> PropertyValueMap;
PropertyValueMap m_values;
};
/** \class QtDateTimePropertyManager
\brief The QtDateTimePropertyManager provides and manages QDateTime properties.
A date and time property has a current value which can be
retrieved using the value() function, and set using the setValue()
slot. In addition, QtDateTimePropertyManager provides the
valueChanged() signal which is emitted whenever a property created
by this manager changes.
\sa QtAbstractPropertyManager, QtDateTimeEditFactory, QtDatePropertyManager
*/
/**
\fn void QtDateTimePropertyManager::valueChanged(QtProperty *property, const QDateTime &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
*/
/**
Creates a manager with the given \a parent.
*/
QtDateTimePropertyManager::QtDateTimePropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtDateTimePropertyManagerPrivate;
d_ptr->q_ptr = this;
QLocale loc;
d_ptr->m_format = loc.dateFormat(QLocale::ShortFormat);
d_ptr->m_format += QLatin1Char(' ');
d_ptr->m_format += loc.timeFormat(QLocale::ShortFormat);
}
/**
Destroys this manager, and all the properties it has created.
*/
QtDateTimePropertyManager::~QtDateTimePropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns an invalid QDateTime object.
\sa setValue()
*/
QDateTime QtDateTimePropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QDateTime());
}
/**
\reimp
*/
QString QtDateTimePropertyManager::valueText(const QtProperty *property) const
{
const QtDateTimePropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return it.value().toString(d_ptr->m_format);
}
/**
\fn void QtDateTimePropertyManager::setValue(QtProperty *property, const QDateTime &value)
Sets the value of the given \a property to \a value.
\sa value(), valueChanged()
*/
void QtDateTimePropertyManager::setValue(QtProperty *property, const QDateTime &val)
{
setSimpleValue<const QDateTime &, QDateTime, QtDateTimePropertyManager>(d_ptr->m_values, this,
&QtDateTimePropertyManager::propertyChanged,
&QtDateTimePropertyManager::valueChanged,
property, val);
}
/**
\reimp
*/
void QtDateTimePropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QDateTime::currentDateTime();
}
/**
\reimp
*/
void QtDateTimePropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtKeySequencePropertyManager
class QtKeySequencePropertyManagerPrivate
{
QtKeySequencePropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtKeySequencePropertyManager)
public:
QString m_format;
typedef QMap<const QtProperty *, QKeySequence> PropertyValueMap;
PropertyValueMap m_values;
};
/** \class QtKeySequencePropertyManager
\brief The QtKeySequencePropertyManager provides and manages QKeySequence properties.
A key sequence's value can be retrieved using the value()
function, and set using the setValue() slot.
In addition, QtKeySequencePropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes.
\sa QtAbstractPropertyManager
*/
/**
\fn void QtKeySequencePropertyManager::valueChanged(QtProperty *property, const QKeySequence &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
*/
/**
Creates a manager with the given \a parent.
*/
QtKeySequencePropertyManager::QtKeySequencePropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtKeySequencePropertyManagerPrivate;
d_ptr->q_ptr = this;
}
/**
Destroys this manager, and all the properties it has created.
*/
QtKeySequencePropertyManager::~QtKeySequencePropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns an empty QKeySequence object.
\sa setValue()
*/
QKeySequence QtKeySequencePropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QKeySequence());
}
/**
\reimp
*/
QString QtKeySequencePropertyManager::valueText(const QtProperty *property) const
{
const QtKeySequencePropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return it.value().toString(QKeySequence::NativeText);
}
/**
\fn void QtKeySequencePropertyManager::setValue(QtProperty *property, const QKeySequence &value)
Sets the value of the given \a property to \a value.
\sa value(), valueChanged()
*/
void QtKeySequencePropertyManager::setValue(QtProperty *property, const QKeySequence &val)
{
setSimpleValue<const QKeySequence &, QKeySequence, QtKeySequencePropertyManager>(d_ptr->m_values, this,
&QtKeySequencePropertyManager::propertyChanged,
&QtKeySequencePropertyManager::valueChanged,
property, val);
}
/**
\reimp
*/
void QtKeySequencePropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QKeySequence();
}
/**
\reimp
*/
void QtKeySequencePropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtCharPropertyManager
class QtCharPropertyManagerPrivate
{
QtCharPropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtCharPropertyManager)
public:
typedef QMap<const QtProperty *, QChar> PropertyValueMap;
PropertyValueMap m_values;
};
/** \class QtCharPropertyManager
\brief The QtCharPropertyManager provides and manages QChar properties.
A char's value can be retrieved using the value()
function, and set using the setValue() slot.
In addition, QtCharPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes.
\sa QtAbstractPropertyManager
*/
/**
\fn void QtCharPropertyManager::valueChanged(QtProperty *property, const QChar &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
*/
/**
Creates a manager with the given \a parent.
*/
QtCharPropertyManager::QtCharPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtCharPropertyManagerPrivate;
d_ptr->q_ptr = this;
}
/**
Destroys this manager, and all the properties it has created.
*/
QtCharPropertyManager::~QtCharPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns an null QChar object.
\sa setValue()
*/
QChar QtCharPropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QChar());
}
/**
\reimp
*/
QString QtCharPropertyManager::valueText(const QtProperty *property) const
{
const QtCharPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QChar c = it.value();
return c.isNull() ? QString() : QString(c);
}
/**
\fn void QtCharPropertyManager::setValue(QtProperty *property, const QChar &value)
Sets the value of the given \a property to \a value.
\sa value(), valueChanged()
*/
void QtCharPropertyManager::setValue(QtProperty *property, const QChar &val)
{
setSimpleValue<const QChar &, QChar, QtCharPropertyManager>(d_ptr->m_values, this,
&QtCharPropertyManager::propertyChanged,
&QtCharPropertyManager::valueChanged,
property, val);
}
/**
\reimp
*/
void QtCharPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QChar();
}
/**
\reimp
*/
void QtCharPropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtLocalePropertyManager
QtLocalePropertyManagerPrivate::QtLocalePropertyManagerPrivate()
{
}
void QtLocalePropertyManagerPrivate::slotEnumChanged(QtProperty *property, int value)
{
if (QtProperty *prop = m_languageToProperty.value(property, 0)) {
const QLocale loc = m_values[prop];
QLocale::Language newLanguage = loc.language();
QLocale::Country newCountry = loc.country();
metaEnumProvider()->indexToLocale(value, 0, &newLanguage, 0);
QLocale newLoc(newLanguage, newCountry);
q_ptr->setValue(prop, newLoc);
} else if (QtProperty *prop = m_countryToProperty.value(property, 0)) {
const QLocale loc = m_values[prop];
QLocale::Language newLanguage = loc.language();
QLocale::Country newCountry = loc.country();
metaEnumProvider()->indexToLocale(m_enumPropertyManager->value(m_propertyToLanguage.value(prop)), value, &newLanguage, &newCountry);
QLocale newLoc(newLanguage, newCountry);
q_ptr->setValue(prop, newLoc);
}
}
void QtLocalePropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *subProp = m_languageToProperty.value(property, 0)) {
m_propertyToLanguage[subProp] = 0;
m_languageToProperty.remove(property);
} else if (QtProperty *subProp = m_countryToProperty.value(property, 0)) {
m_propertyToCountry[subProp] = 0;
m_countryToProperty.remove(property);
}
}
/**
\class QtLocalePropertyManager
\brief The QtLocalePropertyManager provides and manages QLocale properties.
A locale property has nested \e language and \e country
subproperties. The top-level property's value can be retrieved
using the value() function, and set using the setValue() slot.
The subproperties are created by QtEnumPropertyManager object.
These submanager can be retrieved using the subEnumPropertyManager()
function. In order to provide editing widgets for the subproperties
in a property browser widget, this manager must be associated with editor factory.
In addition, QtLocalePropertyManager provides the valueChanged()
signal which is emitted whenever a property created by this
manager changes.
\sa QtAbstractPropertyManager, QtEnumPropertyManager
*/
/**
\fn void QtLocalePropertyManager::valueChanged(QtProperty *property, const QLocale &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the
new \a value as parameters.
\sa setValue()
*/
/**
Creates a manager with the given \a parent.
*/
QtLocalePropertyManager::QtLocalePropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtLocalePropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_enumPropertyManager = new QtEnumPropertyManager(this);
connect(d_ptr->m_enumPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotEnumChanged(QtProperty *, int)));
connect(d_ptr->m_enumPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtLocalePropertyManager::~QtLocalePropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the nested \e language
and \e country subproperties.
In order to provide editing widgets for the mentioned subproperties
in a property browser widget, this manager must be associated with
an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtEnumPropertyManager *QtLocalePropertyManager::subEnumPropertyManager() const
{
return d_ptr->m_enumPropertyManager;
}
/**
Returns the given \a property's value.
If the given property is not managed by this manager, this
function returns the default locale.
\sa setValue()
*/
QLocale QtLocalePropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QLocale());
}
/**
\reimp
*/
QString QtLocalePropertyManager::valueText(const QtProperty *property) const
{
const QtLocalePropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
QLocale loc = it.value();
int langIdx = 0;
int countryIdx = 0;
metaEnumProvider()->localeToIndex(loc.language(), loc.country(), &langIdx, &countryIdx);
QString str = tr("%1, %2")
.arg(metaEnumProvider()->languageEnumNames().at(langIdx))
.arg(metaEnumProvider()->countryEnumNames(loc.language()).at(countryIdx));
return str;
}
/**
\fn void QtLocalePropertyManager::setValue(QtProperty *property, const QLocale &value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
\sa value(), valueChanged()
*/
void QtLocalePropertyManager::setValue(QtProperty *property, const QLocale &val)
{
const QtLocalePropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
const QLocale loc = it.value();
if (loc == val)
return;
it.value() = val;
int langIdx = 0;
int countryIdx = 0;
metaEnumProvider()->localeToIndex(val.language(), val.country(), &langIdx, &countryIdx);
if (loc.language() != val.language()) {
d_ptr->m_enumPropertyManager->setValue(d_ptr->m_propertyToLanguage.value(property), langIdx);
d_ptr->m_enumPropertyManager->setEnumNames(d_ptr->m_propertyToCountry.value(property),
metaEnumProvider()->countryEnumNames(val.language()));
}
d_ptr->m_enumPropertyManager->setValue(d_ptr->m_propertyToCountry.value(property), countryIdx);
emit propertyChanged(property);
emit valueChanged(property, val);
}
/**
\reimp
*/
void QtLocalePropertyManager::initializeProperty(QtProperty *property)
{
QLocale val;
d_ptr->m_values[property] = val;
int langIdx = 0;
int countryIdx = 0;
metaEnumProvider()->localeToIndex(val.language(), val.country(), &langIdx, &countryIdx);
QtProperty *languageProp = d_ptr->m_enumPropertyManager->addProperty();
languageProp->setPropertyName(tr("Language"));
d_ptr->m_enumPropertyManager->setEnumNames(languageProp, metaEnumProvider()->languageEnumNames());
d_ptr->m_enumPropertyManager->setValue(languageProp, langIdx);
d_ptr->m_propertyToLanguage[property] = languageProp;
d_ptr->m_languageToProperty[languageProp] = property;
property->addSubProperty(languageProp);
QtProperty *countryProp = d_ptr->m_enumPropertyManager->addProperty();
countryProp->setPropertyName(tr("Country"));
d_ptr->m_enumPropertyManager->setEnumNames(countryProp, metaEnumProvider()->countryEnumNames(val.language()));
d_ptr->m_enumPropertyManager->setValue(countryProp, countryIdx);
d_ptr->m_propertyToCountry[property] = countryProp;
d_ptr->m_countryToProperty[countryProp] = property;
property->addSubProperty(countryProp);
}
/**
\reimp
*/
void QtLocalePropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *languageProp = d_ptr->m_propertyToLanguage[property];
if (languageProp) {
d_ptr->m_languageToProperty.remove(languageProp);
delete languageProp;
}
d_ptr->m_propertyToLanguage.remove(property);
QtProperty *countryProp = d_ptr->m_propertyToCountry[property];
if (countryProp) {
d_ptr->m_countryToProperty.remove(countryProp);
delete countryProp;
}
d_ptr->m_propertyToCountry.remove(property);
d_ptr->m_values.remove(property);
}
// QtPointPropertyManager
void QtPointPropertyManagerPrivate::slotIntChanged(QtProperty *property, int value)
{
if (QtProperty *xprop = m_xToProperty.value(property, 0)) {
QPoint p = m_values[xprop];
p.setX(value);
q_ptr->setValue(xprop, p);
} else if (QtProperty *yprop = m_yToProperty.value(property, 0)) {
QPoint p = m_values[yprop];
p.setY(value);
q_ptr->setValue(yprop, p);
}
}
void QtPointPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_xToProperty.value(property, 0)) {
m_propertyToX[pointProp] = 0;
m_xToProperty.remove(property);
} else if (QtProperty *pointProp = m_yToProperty.value(property, 0)) {
m_propertyToY[pointProp] = 0;
m_yToProperty.remove(property);
}
}
/** \class QtPointPropertyManager
\brief The QtPointPropertyManager provides and manages QPoint properties.
A point property has nested \e x and \e y subproperties. The
top-level property's value can be retrieved using the value()
function, and set using the setValue() slot.
The subproperties are created by a QtIntPropertyManager object. This
manager can be retrieved using the subIntPropertyManager() function. In
order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
In addition, QtPointPropertyManager provides the valueChanged() signal which
is emitted whenever a property created by this manager changes.
\sa QtAbstractPropertyManager, QtIntPropertyManager, QtPointFPropertyManager
*/
/**
\fn void QtPointPropertyManager::valueChanged(QtProperty *property, const QPoint &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the
new \a value as parameters.
\sa setValue()
*/
/**
Creates a manager with the given \a parent.
*/
QtPointPropertyManager::QtPointPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtPointPropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_intPropertyManager = new QtIntPropertyManager(this);
connect(d_ptr->m_intPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotIntChanged(QtProperty *, int)));
connect(d_ptr->m_intPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtPointPropertyManager::~QtPointPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the nested \e x and \e y
subproperties.
In order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtIntPropertyManager *QtPointPropertyManager::subIntPropertyManager() const
{
return d_ptr->m_intPropertyManager;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns a point with coordinates (0, 0).
\sa setValue()
*/
QPoint QtPointPropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QPoint());
}
/**
\reimp
*/
QString QtPointPropertyManager::valueText(const QtProperty *property) const
{
const QtPointPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QPoint v = it.value();
return QString(tr("(%1, %2)").arg(QString::number(v.x()))
.arg(QString::number(v.y())));
}
/**
\fn void QtPointPropertyManager::setValue(QtProperty *property, const QPoint &value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
\sa value(), valueChanged()
*/
void QtPointPropertyManager::setValue(QtProperty *property, const QPoint &val)
{
const QtPointPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
if (it.value() == val)
return;
it.value() = val;
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToX[property], val.x());
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToY[property], val.y());
emit propertyChanged(property);
emit valueChanged(property, val);
}
/**
\reimp
*/
void QtPointPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QPoint(0, 0);
QtProperty *xProp = d_ptr->m_intPropertyManager->addProperty();
xProp->setPropertyName(tr("X"));
d_ptr->m_intPropertyManager->setValue(xProp, 0);
d_ptr->m_propertyToX[property] = xProp;
d_ptr->m_xToProperty[xProp] = property;
property->addSubProperty(xProp);
QtProperty *yProp = d_ptr->m_intPropertyManager->addProperty();
yProp->setPropertyName(tr("Y"));
d_ptr->m_intPropertyManager->setValue(yProp, 0);
d_ptr->m_propertyToY[property] = yProp;
d_ptr->m_yToProperty[yProp] = property;
property->addSubProperty(yProp);
}
/**
\reimp
*/
void QtPointPropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *xProp = d_ptr->m_propertyToX[property];
if (xProp) {
d_ptr->m_xToProperty.remove(xProp);
delete xProp;
}
d_ptr->m_propertyToX.remove(property);
QtProperty *yProp = d_ptr->m_propertyToY[property];
if (yProp) {
d_ptr->m_yToProperty.remove(yProp);
delete yProp;
}
d_ptr->m_propertyToY.remove(property);
d_ptr->m_values.remove(property);
}
// QtPointFPropertyManager
void QtPointFPropertyManagerPrivate::slotDoubleChanged(QtProperty *property, double value)
{
if (QtProperty *prop = m_xToProperty.value(property, 0)) {
QPointF p = m_values[prop].val;
p.setX(value);
q_ptr->setValue(prop, p);
} else if (QtProperty *prop = m_yToProperty.value(property, 0)) {
QPointF p = m_values[prop].val;
p.setY(value);
q_ptr->setValue(prop, p);
}
}
void QtPointFPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_xToProperty.value(property, 0)) {
m_propertyToX[pointProp] = 0;
m_xToProperty.remove(property);
} else if (QtProperty *pointProp = m_yToProperty.value(property, 0)) {
m_propertyToY[pointProp] = 0;
m_yToProperty.remove(property);
}
}
/** \class QtPointFPropertyManager
\brief The QtPointFPropertyManager provides and manages QPointF properties.
A point property has nested \e x and \e y subproperties. The
top-level property's value can be retrieved using the value()
function, and set using the setValue() slot.
The subproperties are created by a QtDoublePropertyManager object. This
manager can be retrieved using the subDoublePropertyManager() function. In
order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
In addition, QtPointFPropertyManager provides the valueChanged() signal which
is emitted whenever a property created by this manager changes.
\sa QtAbstractPropertyManager, QtDoublePropertyManager, QtPointPropertyManager
*/
/**
\fn void QtPointFPropertyManager::valueChanged(QtProperty *property, const QPointF &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the
new \a value as parameters.
\sa setValue()
*/
/**
\fn void QtPointFPropertyManager::decimalsChanged(QtProperty *property, int prec)
This signal is emitted whenever a property created by this manager
changes its precision of value, passing a pointer to the
\a property and the new \a prec value
\sa setDecimals()
*/
/**
Creates a manager with the given \a parent.
*/
QtPointFPropertyManager::QtPointFPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtPointFPropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_doublePropertyManager = new QtDoublePropertyManager(this);
connect(d_ptr->m_doublePropertyManager, SIGNAL(valueChanged(QtProperty *, double)),
this, SLOT(slotDoubleChanged(QtProperty *, double)));
connect(d_ptr->m_doublePropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtPointFPropertyManager::~QtPointFPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the nested \e x and \e y
subproperties.
In order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtDoublePropertyManager *QtPointFPropertyManager::subDoublePropertyManager() const
{
return d_ptr->m_doublePropertyManager;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns a point with coordinates (0, 0).
\sa setValue()
*/
QPointF QtPointFPropertyManager::value(const QtProperty *property) const
{
return getValue<QPointF>(d_ptr->m_values, property);
}
/**
Returns the given \a property's precision, in decimals.
\sa setDecimals()
*/
int QtPointFPropertyManager::decimals(const QtProperty *property) const
{
return getData<int>(d_ptr->m_values, &QtPointFPropertyManagerPrivate::Data::decimals, property, 0);
}
/**
\reimp
*/
QString QtPointFPropertyManager::valueText(const QtProperty *property) const
{
const QtPointFPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QPointF v = it.value().val;
const int dec = it.value().decimals;
return QString(tr("(%1, %2)").arg(QString::number(v.x(), 'f', dec))
.arg(QString::number(v.y(), 'f', dec)));
}
/**
\fn void QtPointFPropertyManager::setValue(QtProperty *property, const QPointF &value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
\sa value(), valueChanged()
*/
void QtPointFPropertyManager::setValue(QtProperty *property, const QPointF &val)
{
const QtPointFPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
if (it.value().val == val)
return;
it.value().val = val;
d_ptr->m_doublePropertyManager->setValue(d_ptr->m_propertyToX[property], val.x());
d_ptr->m_doublePropertyManager->setValue(d_ptr->m_propertyToY[property], val.y());
emit propertyChanged(property);
emit valueChanged(property, val);
}
/**
\fn void QtPointFPropertyManager::setDecimals(QtProperty *property, int prec)
Sets the precision of the given \a property to \a prec.
The valid decimal range is 0-13. The default is 2.
\sa decimals()
*/
void QtPointFPropertyManager::setDecimals(QtProperty *property, int prec)
{
const QtPointFPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtPointFPropertyManagerPrivate::Data data = it.value();
if (prec > 13)
prec = 13;
else if (prec < 0)
prec = 0;
if (data.decimals == prec)
return;
data.decimals = prec;
d_ptr->m_doublePropertyManager->setDecimals(d_ptr->m_propertyToX[property], prec);
d_ptr->m_doublePropertyManager->setDecimals(d_ptr->m_propertyToY[property], prec);
it.value() = data;
emit decimalsChanged(property, data.decimals);
}
/**
\reimp
*/
void QtPointFPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtPointFPropertyManagerPrivate::Data();
QtProperty *xProp = d_ptr->m_doublePropertyManager->addProperty();
xProp->setPropertyName(tr("X"));
d_ptr->m_doublePropertyManager->setDecimals(xProp, decimals(property));
d_ptr->m_doublePropertyManager->setValue(xProp, 0);
d_ptr->m_propertyToX[property] = xProp;
d_ptr->m_xToProperty[xProp] = property;
property->addSubProperty(xProp);
QtProperty *yProp = d_ptr->m_doublePropertyManager->addProperty();
yProp->setPropertyName(tr("Y"));
d_ptr->m_doublePropertyManager->setDecimals(yProp, decimals(property));
d_ptr->m_doublePropertyManager->setValue(yProp, 0);
d_ptr->m_propertyToY[property] = yProp;
d_ptr->m_yToProperty[yProp] = property;
property->addSubProperty(yProp);
}
/**
\reimp
*/
void QtPointFPropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *xProp = d_ptr->m_propertyToX[property];
if (xProp) {
d_ptr->m_xToProperty.remove(xProp);
delete xProp;
}
d_ptr->m_propertyToX.remove(property);
QtProperty *yProp = d_ptr->m_propertyToY[property];
if (yProp) {
d_ptr->m_yToProperty.remove(yProp);
delete yProp;
}
d_ptr->m_propertyToY.remove(property);
d_ptr->m_values.remove(property);
}
// QtSizePropertyManager
void QtSizePropertyManagerPrivate::slotIntChanged(QtProperty *property, int value)
{
if (QtProperty *prop = m_wToProperty.value(property, 0)) {
QSize s = m_values[prop].val;
s.setWidth(value);
q_ptr->setValue(prop, s);
} else if (QtProperty *prop = m_hToProperty.value(property, 0)) {
QSize s = m_values[prop].val;
s.setHeight(value);
q_ptr->setValue(prop, s);
}
}
void QtSizePropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_wToProperty.value(property, 0)) {
m_propertyToW[pointProp] = 0;
m_wToProperty.remove(property);
} else if (QtProperty *pointProp = m_hToProperty.value(property, 0)) {
m_propertyToH[pointProp] = 0;
m_hToProperty.remove(property);
}
}
void QtSizePropertyManagerPrivate::setValue(QtProperty *property, const QSize &val)
{
m_intPropertyManager->setValue(m_propertyToW.value(property), val.width());
m_intPropertyManager->setValue(m_propertyToH.value(property), val.height());
}
void QtSizePropertyManagerPrivate::setRange(QtProperty *property,
const QSize &minVal, const QSize &maxVal, const QSize &val)
{
QtProperty *wProperty = m_propertyToW.value(property);
QtProperty *hProperty = m_propertyToH.value(property);
m_intPropertyManager->setRange(wProperty, minVal.width(), maxVal.width());
m_intPropertyManager->setValue(wProperty, val.width());
m_intPropertyManager->setRange(hProperty, minVal.height(), maxVal.height());
m_intPropertyManager->setValue(hProperty, val.height());
}
/**
\class QtSizePropertyManager
\brief The QtSizePropertyManager provides and manages QSize properties.
A size property has nested \e width and \e height
subproperties. The top-level property's value can be retrieved
using the value() function, and set using the setValue() slot.
The subproperties are created by a QtIntPropertyManager object. This
manager can be retrieved using the subIntPropertyManager() function. In
order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
A size property also has a range of valid values defined by a
minimum size and a maximum size. These sizes can be retrieved
using the minimum() and the maximum() functions, and set using the
setMinimum() and setMaximum() slots. Alternatively, the range can
be defined in one go using the setRange() slot.
In addition, QtSizePropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes, and the rangeChanged() signal which is emitted whenever
such a property changes its range of valid sizes.
\sa QtAbstractPropertyManager, QtIntPropertyManager, QtSizeFPropertyManager
*/
/**
\fn void QtSizePropertyManager::valueChanged(QtProperty *property, const QSize &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtSizePropertyManager::rangeChanged(QtProperty *property, const QSize &minimum, const QSize &maximum)
This signal is emitted whenever a property created by this manager
changes its range of valid sizes, passing a pointer to the \a
property and the new \a minimum and \a maximum sizes.
\sa setRange()
*/
/**
Creates a manager with the given \a parent.
*/
QtSizePropertyManager::QtSizePropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtSizePropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_intPropertyManager = new QtIntPropertyManager(this);
connect(d_ptr->m_intPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotIntChanged(QtProperty *, int)));
connect(d_ptr->m_intPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtSizePropertyManager::~QtSizePropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the nested \e width and \e height
subproperties.
In order to provide editing widgets for the \e width and \e height
properties in a property browser widget, this manager must be
associated with an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtIntPropertyManager *QtSizePropertyManager::subIntPropertyManager() const
{
return d_ptr->m_intPropertyManager;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns an invalid size
\sa setValue()
*/
QSize QtSizePropertyManager::value(const QtProperty *property) const
{
return getValue<QSize>(d_ptr->m_values, property);
}
/**
Returns the given \a property's minimum size value.
\sa setMinimum(), maximum(), setRange()
*/
QSize QtSizePropertyManager::minimum(const QtProperty *property) const
{
return getMinimum<QSize>(d_ptr->m_values, property);
}
/**
Returns the given \a property's maximum size value.
\sa setMaximum(), minimum(), setRange()
*/
QSize QtSizePropertyManager::maximum(const QtProperty *property) const
{
return getMaximum<QSize>(d_ptr->m_values, property);
}
/**
\reimp
*/
QString QtSizePropertyManager::valueText(const QtProperty *property) const
{
const QtSizePropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QSize v = it.value().val;
return QString(tr("%1 x %2").arg(QString::number(v.width()))
.arg(QString::number(v.height())));
}
/**
\fn void QtSizePropertyManager::setValue(QtProperty *property, const QSize &value)
Sets the value of the given \a property to \a value.
If the specified \a value is not valid according to the given \a
property's size range, the \a value is adjusted to the nearest
valid value within the size range.
\sa value(), setRange(), valueChanged()
*/
void QtSizePropertyManager::setValue(QtProperty *property, const QSize &val)
{
setValueInRange<const QSize &, QtSizePropertyManagerPrivate, QtSizePropertyManager, const QSize>(this, d_ptr,
&QtSizePropertyManager::propertyChanged,
&QtSizePropertyManager::valueChanged,
property, val, &QtSizePropertyManagerPrivate::setValue);
}
/**
Sets the minimum size value for the given \a property to \a minVal.
When setting the minimum size value, the maximum and current
values are adjusted if necessary (ensuring that the size range
remains valid and that the current value is within the range).
\sa minimum(), setRange(), rangeChanged()
*/
void QtSizePropertyManager::setMinimum(QtProperty *property, const QSize &minVal)
{
setBorderValue<const QSize &, QtSizePropertyManagerPrivate, QtSizePropertyManager, QSize, QtSizePropertyManagerPrivate::Data>(this, d_ptr,
&QtSizePropertyManager::propertyChanged,
&QtSizePropertyManager::valueChanged,
&QtSizePropertyManager::rangeChanged,
property,
&QtSizePropertyManagerPrivate::Data::minimumValue,
&QtSizePropertyManagerPrivate::Data::setMinimumValue,
minVal, &QtSizePropertyManagerPrivate::setRange);
}
/**
Sets the maximum size value for the given \a property to \a maxVal.
When setting the maximum size value, the minimum and current
values are adjusted if necessary (ensuring that the size range
remains valid and that the current value is within the range).
\sa maximum(), setRange(), rangeChanged()
*/
void QtSizePropertyManager::setMaximum(QtProperty *property, const QSize &maxVal)
{
setBorderValue<const QSize &, QtSizePropertyManagerPrivate, QtSizePropertyManager, QSize, QtSizePropertyManagerPrivate::Data>(this, d_ptr,
&QtSizePropertyManager::propertyChanged,
&QtSizePropertyManager::valueChanged,
&QtSizePropertyManager::rangeChanged,
property,
&QtSizePropertyManagerPrivate::Data::maximumValue,
&QtSizePropertyManagerPrivate::Data::setMaximumValue,
maxVal, &QtSizePropertyManagerPrivate::setRange);
}
/**
\fn void QtSizePropertyManager::setRange(QtProperty *property, const QSize &minimum, const QSize &maximum)
Sets the range of valid values.
This is a convenience function defining the range of valid values
in one go; setting the \a minimum and \a maximum values for the
given \a property with a single function call.
When setting a new range, the current value is adjusted if
necessary (ensuring that the value remains within the range).
\sa setMinimum(), setMaximum(), rangeChanged()
*/
void QtSizePropertyManager::setRange(QtProperty *property, const QSize &minVal, const QSize &maxVal)
{
setBorderValues<const QSize &, QtSizePropertyManagerPrivate, QtSizePropertyManager, QSize>(this, d_ptr,
&QtSizePropertyManager::propertyChanged,
&QtSizePropertyManager::valueChanged,
&QtSizePropertyManager::rangeChanged,
property, minVal, maxVal, &QtSizePropertyManagerPrivate::setRange);
}
/**
\reimp
*/
void QtSizePropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtSizePropertyManagerPrivate::Data();
QtProperty *wProp = d_ptr->m_intPropertyManager->addProperty();
wProp->setPropertyName(tr("Width"));
d_ptr->m_intPropertyManager->setValue(wProp, 0);
d_ptr->m_intPropertyManager->setMinimum(wProp, 0);
d_ptr->m_propertyToW[property] = wProp;
d_ptr->m_wToProperty[wProp] = property;
property->addSubProperty(wProp);
QtProperty *hProp = d_ptr->m_intPropertyManager->addProperty();
hProp->setPropertyName(tr("Height"));
d_ptr->m_intPropertyManager->setValue(hProp, 0);
d_ptr->m_intPropertyManager->setMinimum(hProp, 0);
d_ptr->m_propertyToH[property] = hProp;
d_ptr->m_hToProperty[hProp] = property;
property->addSubProperty(hProp);
}
/**
\reimp
*/
void QtSizePropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *wProp = d_ptr->m_propertyToW[property];
if (wProp) {
d_ptr->m_wToProperty.remove(wProp);
delete wProp;
}
d_ptr->m_propertyToW.remove(property);
QtProperty *hProp = d_ptr->m_propertyToH[property];
if (hProp) {
d_ptr->m_hToProperty.remove(hProp);
delete hProp;
}
d_ptr->m_propertyToH.remove(property);
d_ptr->m_values.remove(property);
}
// QtSizeFPropertyManager
void QtSizeFPropertyManagerPrivate::slotDoubleChanged(QtProperty *property, double value)
{
if (QtProperty *prop = m_wToProperty.value(property, 0)) {
QSizeF s = m_values[prop].val;
s.setWidth(value);
q_ptr->setValue(prop, s);
} else if (QtProperty *prop = m_hToProperty.value(property, 0)) {
QSizeF s = m_values[prop].val;
s.setHeight(value);
q_ptr->setValue(prop, s);
}
}
void QtSizeFPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_wToProperty.value(property, 0)) {
m_propertyToW[pointProp] = 0;
m_wToProperty.remove(property);
} else if (QtProperty *pointProp = m_hToProperty.value(property, 0)) {
m_propertyToH[pointProp] = 0;
m_hToProperty.remove(property);
}
}
void QtSizeFPropertyManagerPrivate::setValue(QtProperty *property, const QSizeF &val)
{
m_doublePropertyManager->setValue(m_propertyToW.value(property), val.width());
m_doublePropertyManager->setValue(m_propertyToH.value(property), val.height());
}
void QtSizeFPropertyManagerPrivate::setRange(QtProperty *property,
const QSizeF &minVal, const QSizeF &maxVal, const QSizeF &val)
{
m_doublePropertyManager->setRange(m_propertyToW[property], minVal.width(), maxVal.width());
m_doublePropertyManager->setValue(m_propertyToW[property], val.width());
m_doublePropertyManager->setRange(m_propertyToH[property], minVal.height(), maxVal.height());
m_doublePropertyManager->setValue(m_propertyToH[property], val.height());
}
/**
\class QtSizeFPropertyManager
\brief The QtSizeFPropertyManager provides and manages QSizeF properties.
A size property has nested \e width and \e height
subproperties. The top-level property's value can be retrieved
using the value() function, and set using the setValue() slot.
The subproperties are created by a QtDoublePropertyManager object. This
manager can be retrieved using the subDoublePropertyManager() function. In
order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
A size property also has a range of valid values defined by a
minimum size and a maximum size. These sizes can be retrieved
using the minimum() and the maximum() functions, and set using the
setMinimum() and setMaximum() slots. Alternatively, the range can
be defined in one go using the setRange() slot.
In addition, QtSizeFPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes, and the rangeChanged() signal which is emitted whenever
such a property changes its range of valid sizes.
\sa QtAbstractPropertyManager, QtDoublePropertyManager, QtSizePropertyManager
*/
/**
\fn void QtSizeFPropertyManager::valueChanged(QtProperty *property, const QSizeF &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtSizeFPropertyManager::rangeChanged(QtProperty *property, const QSizeF &minimum, const QSizeF &maximum)
This signal is emitted whenever a property created by this manager
changes its range of valid sizes, passing a pointer to the \a
property and the new \a minimum and \a maximum sizes.
\sa setRange()
*/
/**
\fn void QtSizeFPropertyManager::decimalsChanged(QtProperty *property, int prec)
This signal is emitted whenever a property created by this manager
changes its precision of value, passing a pointer to the
\a property and the new \a prec value
\sa setDecimals()
*/
/**
Creates a manager with the given \a parent.
*/
QtSizeFPropertyManager::QtSizeFPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtSizeFPropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_doublePropertyManager = new QtDoublePropertyManager(this);
connect(d_ptr->m_doublePropertyManager, SIGNAL(valueChanged(QtProperty *, double)),
this, SLOT(slotDoubleChanged(QtProperty *, double)));
connect(d_ptr->m_doublePropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtSizeFPropertyManager::~QtSizeFPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the nested \e width and \e height
subproperties.
In order to provide editing widgets for the \e width and \e height
properties in a property browser widget, this manager must be
associated with an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtDoublePropertyManager *QtSizeFPropertyManager::subDoublePropertyManager() const
{
return d_ptr->m_doublePropertyManager;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns an invalid size
\sa setValue()
*/
QSizeF QtSizeFPropertyManager::value(const QtProperty *property) const
{
return getValue<QSizeF>(d_ptr->m_values, property);
}
/**
Returns the given \a property's precision, in decimals.
\sa setDecimals()
*/
int QtSizeFPropertyManager::decimals(const QtProperty *property) const
{
return getData<int>(d_ptr->m_values, &QtSizeFPropertyManagerPrivate::Data::decimals, property, 0);
}
/**
Returns the given \a property's minimum size value.
\sa setMinimum(), maximum(), setRange()
*/
QSizeF QtSizeFPropertyManager::minimum(const QtProperty *property) const
{
return getMinimum<QSizeF>(d_ptr->m_values, property);
}
/**
Returns the given \a property's maximum size value.
\sa setMaximum(), minimum(), setRange()
*/
QSizeF QtSizeFPropertyManager::maximum(const QtProperty *property) const
{
return getMaximum<QSizeF>(d_ptr->m_values, property);
}
/**
\reimp
*/
QString QtSizeFPropertyManager::valueText(const QtProperty *property) const
{
const QtSizeFPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QSizeF v = it.value().val;
const int dec = it.value().decimals;
return QString(tr("%1 x %2").arg(QString::number(v.width(), 'f', dec))
.arg(QString::number(v.height(), 'f', dec)));
}
/**
\fn void QtSizeFPropertyManager::setValue(QtProperty *property, const QSizeF &value)
Sets the value of the given \a property to \a value.
If the specified \a value is not valid according to the given \a
property's size range, the \a value is adjusted to the nearest
valid value within the size range.
\sa value(), setRange(), valueChanged()
*/
void QtSizeFPropertyManager::setValue(QtProperty *property, const QSizeF &val)
{
setValueInRange<const QSizeF &, QtSizeFPropertyManagerPrivate, QtSizeFPropertyManager, QSizeF>(this, d_ptr,
&QtSizeFPropertyManager::propertyChanged,
&QtSizeFPropertyManager::valueChanged,
property, val, &QtSizeFPropertyManagerPrivate::setValue);
}
/**
\fn void QtSizeFPropertyManager::setDecimals(QtProperty *property, int prec)
Sets the precision of the given \a property to \a prec.
The valid decimal range is 0-13. The default is 2.
\sa decimals()
*/
void QtSizeFPropertyManager::setDecimals(QtProperty *property, int prec)
{
const QtSizeFPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtSizeFPropertyManagerPrivate::Data data = it.value();
if (prec > 13)
prec = 13;
else if (prec < 0)
prec = 0;
if (data.decimals == prec)
return;
data.decimals = prec;
d_ptr->m_doublePropertyManager->setDecimals(d_ptr->m_propertyToW[property], prec);
d_ptr->m_doublePropertyManager->setDecimals(d_ptr->m_propertyToH[property], prec);
it.value() = data;
emit decimalsChanged(property, data.decimals);
}
/**
Sets the minimum size value for the given \a property to \a minVal.
When setting the minimum size value, the maximum and current
values are adjusted if necessary (ensuring that the size range
remains valid and that the current value is within the range).
\sa minimum(), setRange(), rangeChanged()
*/
void QtSizeFPropertyManager::setMinimum(QtProperty *property, const QSizeF &minVal)
{
setBorderValue<const QSizeF &, QtSizeFPropertyManagerPrivate, QtSizeFPropertyManager, QSizeF, QtSizeFPropertyManagerPrivate::Data>(this, d_ptr,
&QtSizeFPropertyManager::propertyChanged,
&QtSizeFPropertyManager::valueChanged,
&QtSizeFPropertyManager::rangeChanged,
property,
&QtSizeFPropertyManagerPrivate::Data::minimumValue,
&QtSizeFPropertyManagerPrivate::Data::setMinimumValue,
minVal, &QtSizeFPropertyManagerPrivate::setRange);
}
/**
Sets the maximum size value for the given \a property to \a maxVal.
When setting the maximum size value, the minimum and current
values are adjusted if necessary (ensuring that the size range
remains valid and that the current value is within the range).
\sa maximum(), setRange(), rangeChanged()
*/
void QtSizeFPropertyManager::setMaximum(QtProperty *property, const QSizeF &maxVal)
{
setBorderValue<const QSizeF &, QtSizeFPropertyManagerPrivate, QtSizeFPropertyManager, QSizeF, QtSizeFPropertyManagerPrivate::Data>(this, d_ptr,
&QtSizeFPropertyManager::propertyChanged,
&QtSizeFPropertyManager::valueChanged,
&QtSizeFPropertyManager::rangeChanged,
property,
&QtSizeFPropertyManagerPrivate::Data::maximumValue,
&QtSizeFPropertyManagerPrivate::Data::setMaximumValue,
maxVal, &QtSizeFPropertyManagerPrivate::setRange);
}
/**
\fn void QtSizeFPropertyManager::setRange(QtProperty *property, const QSizeF &minimum, const QSizeF &maximum)
Sets the range of valid values.
This is a convenience function defining the range of valid values
in one go; setting the \a minimum and \a maximum values for the
given \a property with a single function call.
When setting a new range, the current value is adjusted if
necessary (ensuring that the value remains within the range).
\sa setMinimum(), setMaximum(), rangeChanged()
*/
void QtSizeFPropertyManager::setRange(QtProperty *property, const QSizeF &minVal, const QSizeF &maxVal)
{
setBorderValues<const QSizeF &, QtSizeFPropertyManagerPrivate, QtSizeFPropertyManager, QSizeF>(this, d_ptr,
&QtSizeFPropertyManager::propertyChanged,
&QtSizeFPropertyManager::valueChanged,
&QtSizeFPropertyManager::rangeChanged,
property, minVal, maxVal, &QtSizeFPropertyManagerPrivate::setRange);
}
/**
\reimp
*/
void QtSizeFPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtSizeFPropertyManagerPrivate::Data();
QtProperty *wProp = d_ptr->m_doublePropertyManager->addProperty();
wProp->setPropertyName(tr("Width"));
d_ptr->m_doublePropertyManager->setDecimals(wProp, decimals(property));
d_ptr->m_doublePropertyManager->setValue(wProp, 0);
d_ptr->m_doublePropertyManager->setMinimum(wProp, 0);
d_ptr->m_propertyToW[property] = wProp;
d_ptr->m_wToProperty[wProp] = property;
property->addSubProperty(wProp);
QtProperty *hProp = d_ptr->m_doublePropertyManager->addProperty();
hProp->setPropertyName(tr("Height"));
d_ptr->m_doublePropertyManager->setDecimals(hProp, decimals(property));
d_ptr->m_doublePropertyManager->setValue(hProp, 0);
d_ptr->m_doublePropertyManager->setMinimum(hProp, 0);
d_ptr->m_propertyToH[property] = hProp;
d_ptr->m_hToProperty[hProp] = property;
property->addSubProperty(hProp);
}
/**
\reimp
*/
void QtSizeFPropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *wProp = d_ptr->m_propertyToW[property];
if (wProp) {
d_ptr->m_wToProperty.remove(wProp);
delete wProp;
}
d_ptr->m_propertyToW.remove(property);
QtProperty *hProp = d_ptr->m_propertyToH[property];
if (hProp) {
d_ptr->m_hToProperty.remove(hProp);
delete hProp;
}
d_ptr->m_propertyToH.remove(property);
d_ptr->m_values.remove(property);
}
// QtRectPropertyManager
void QtRectPropertyManagerPrivate::slotIntChanged(QtProperty *property, int value)
{
if (QtProperty *prop = m_xToProperty.value(property, 0)) {
QRect r = m_values[prop].val;
r.moveLeft(value);
q_ptr->setValue(prop, r);
} else if (QtProperty *prop = m_yToProperty.value(property)) {
QRect r = m_values[prop].val;
r.moveTop(value);
q_ptr->setValue(prop, r);
} else if (QtProperty *prop = m_wToProperty.value(property, 0)) {
Data data = m_values[prop];
QRect r = data.val;
r.setWidth(value);
if (!data.constraint.isNull() && data.constraint.x() + data.constraint.width() < r.x() + r.width()) {
r.moveLeft(data.constraint.left() + data.constraint.width() - r.width());
}
q_ptr->setValue(prop, r);
} else if (QtProperty *prop = m_hToProperty.value(property, 0)) {
Data data = m_values[prop];
QRect r = data.val;
r.setHeight(value);
if (!data.constraint.isNull() && data.constraint.y() + data.constraint.height() < r.y() + r.height()) {
r.moveTop(data.constraint.top() + data.constraint.height() - r.height());
}
q_ptr->setValue(prop, r);
}
}
void QtRectPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_xToProperty.value(property, 0)) {
m_propertyToX[pointProp] = 0;
m_xToProperty.remove(property);
} else if (QtProperty *pointProp = m_yToProperty.value(property, 0)) {
m_propertyToY[pointProp] = 0;
m_yToProperty.remove(property);
} else if (QtProperty *pointProp = m_wToProperty.value(property, 0)) {
m_propertyToW[pointProp] = 0;
m_wToProperty.remove(property);
} else if (QtProperty *pointProp = m_hToProperty.value(property, 0)) {
m_propertyToH[pointProp] = 0;
m_hToProperty.remove(property);
}
}
void QtRectPropertyManagerPrivate::setConstraint(QtProperty *property,
const QRect &constraint, const QRect &val)
{
const bool isNull = constraint.isNull();
const int left = isNull ? INT_MIN : constraint.left();
const int right = isNull ? INT_MAX : constraint.left() + constraint.width();
const int top = isNull ? INT_MIN : constraint.top();
const int bottom = isNull ? INT_MAX : constraint.top() + constraint.height();
const int width = isNull ? INT_MAX : constraint.width();
const int height = isNull ? INT_MAX : constraint.height();
m_intPropertyManager->setRange(m_propertyToX[property], left, right);
m_intPropertyManager->setRange(m_propertyToY[property], top, bottom);
m_intPropertyManager->setRange(m_propertyToW[property], 0, width);
m_intPropertyManager->setRange(m_propertyToH[property], 0, height);
m_intPropertyManager->setValue(m_propertyToX[property], val.x());
m_intPropertyManager->setValue(m_propertyToY[property], val.y());
m_intPropertyManager->setValue(m_propertyToW[property], val.width());
m_intPropertyManager->setValue(m_propertyToH[property], val.height());
}
/**
\class QtRectPropertyManager
\brief The QtRectPropertyManager provides and manages QRect properties.
A rectangle property has nested \e x, \e y, \e width and \e height
subproperties. The top-level property's value can be retrieved
using the value() function, and set using the setValue() slot.
The subproperties are created by a QtIntPropertyManager object. This
manager can be retrieved using the subIntPropertyManager() function. In
order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
A rectangle property also has a constraint rectangle which can be
retrieved using the constraint() function, and set using the
setConstraint() slot.
In addition, QtRectPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes, and the constraintChanged() signal which is emitted
whenever such a property changes its constraint rectangle.
\sa QtAbstractPropertyManager, QtIntPropertyManager, QtRectFPropertyManager
*/
/**
\fn void QtRectPropertyManager::valueChanged(QtProperty *property, const QRect &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtRectPropertyManager::constraintChanged(QtProperty *property, const QRect &constraint)
This signal is emitted whenever property changes its constraint
rectangle, passing a pointer to the \a property and the new \a
constraint rectangle as parameters.
\sa setConstraint()
*/
/**
Creates a manager with the given \a parent.
*/
QtRectPropertyManager::QtRectPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtRectPropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_intPropertyManager = new QtIntPropertyManager(this);
connect(d_ptr->m_intPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotIntChanged(QtProperty *, int)));
connect(d_ptr->m_intPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtRectPropertyManager::~QtRectPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the nested \e x, \e y, \e width
and \e height subproperties.
In order to provide editing widgets for the mentioned
subproperties in a property browser widget, this manager must be
associated with an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtIntPropertyManager *QtRectPropertyManager::subIntPropertyManager() const
{
return d_ptr->m_intPropertyManager;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns an invalid rectangle.
\sa setValue(), constraint()
*/
QRect QtRectPropertyManager::value(const QtProperty *property) const
{
return getValue<QRect>(d_ptr->m_values, property);
}
/**
Returns the given \a property's constraining rectangle. If returned value is null QRect it means there is no constraint applied.
\sa value(), setConstraint()
*/
QRect QtRectPropertyManager::constraint(const QtProperty *property) const
{
return getData<QRect>(d_ptr->m_values, &QtRectPropertyManagerPrivate::Data::constraint, property, QRect());
}
/**
\reimp
*/
QString QtRectPropertyManager::valueText(const QtProperty *property) const
{
const QtRectPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QRect v = it.value().val;
return QString(tr("[(%1, %2), %3 x %4]").arg(QString::number(v.x()))
.arg(QString::number(v.y()))
.arg(QString::number(v.width()))
.arg(QString::number(v.height())));
}
/**
\fn void QtRectPropertyManager::setValue(QtProperty *property, const QRect &value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
If the specified \a value is not inside the given \a property's
constraining rectangle, the value is adjusted accordingly to fit
within the constraint.
\sa value(), setConstraint(), valueChanged()
*/
void QtRectPropertyManager::setValue(QtProperty *property, const QRect &val)
{
const QtRectPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtRectPropertyManagerPrivate::Data data = it.value();
QRect newRect = val.normalized();
if (!data.constraint.isNull() && !data.constraint.contains(newRect)) {
const QRect r1 = data.constraint;
const QRect r2 = newRect;
newRect.setLeft(qMax(r1.left(), r2.left()));
newRect.setRight(qMin(r1.right(), r2.right()));
newRect.setTop(qMax(r1.top(), r2.top()));
newRect.setBottom(qMin(r1.bottom(), r2.bottom()));
if (newRect.width() < 0 || newRect.height() < 0)
return;
}
if (data.val == newRect)
return;
data.val = newRect;
it.value() = data;
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToX[property], newRect.x());
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToY[property], newRect.y());
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToW[property], newRect.width());
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToH[property], newRect.height());
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
Sets the given \a property's constraining rectangle to \a
constraint.
When setting the constraint, the current value is adjusted if
necessary (ensuring that the current rectangle value is inside the
constraint). In order to reset the constraint pass a null QRect value.
\sa setValue(), constraint(), constraintChanged()
*/
void QtRectPropertyManager::setConstraint(QtProperty *property, const QRect &constraint)
{
const QtRectPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtRectPropertyManagerPrivate::Data data = it.value();
QRect newConstraint = constraint.normalized();
if (data.constraint == newConstraint)
return;
const QRect oldVal = data.val;
data.constraint = newConstraint;
if (!data.constraint.isNull() && !data.constraint.contains(oldVal)) {
QRect r1 = data.constraint;
QRect r2 = data.val;
if (r2.width() > r1.width())
r2.setWidth(r1.width());
if (r2.height() > r1.height())
r2.setHeight(r1.height());
if (r2.left() < r1.left())
r2.moveLeft(r1.left());
else if (r2.right() > r1.right())
r2.moveRight(r1.right());
if (r2.top() < r1.top())
r2.moveTop(r1.top());
else if (r2.bottom() > r1.bottom())
r2.moveBottom(r1.bottom());
data.val = r2;
}
it.value() = data;
emit constraintChanged(property, data.constraint);
d_ptr->setConstraint(property, data.constraint, data.val);
if (data.val == oldVal)
return;
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
\reimp
*/
void QtRectPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtRectPropertyManagerPrivate::Data();
QtProperty *xProp = d_ptr->m_intPropertyManager->addProperty();
xProp->setPropertyName(tr("X"));
d_ptr->m_intPropertyManager->setValue(xProp, 0);
d_ptr->m_propertyToX[property] = xProp;
d_ptr->m_xToProperty[xProp] = property;
property->addSubProperty(xProp);
QtProperty *yProp = d_ptr->m_intPropertyManager->addProperty();
yProp->setPropertyName(tr("Y"));
d_ptr->m_intPropertyManager->setValue(yProp, 0);
d_ptr->m_propertyToY[property] = yProp;
d_ptr->m_yToProperty[yProp] = property;
property->addSubProperty(yProp);
QtProperty *wProp = d_ptr->m_intPropertyManager->addProperty();
wProp->setPropertyName(tr("Width"));
d_ptr->m_intPropertyManager->setValue(wProp, 0);
d_ptr->m_intPropertyManager->setMinimum(wProp, 0);
d_ptr->m_propertyToW[property] = wProp;
d_ptr->m_wToProperty[wProp] = property;
property->addSubProperty(wProp);
QtProperty *hProp = d_ptr->m_intPropertyManager->addProperty();
hProp->setPropertyName(tr("Height"));
d_ptr->m_intPropertyManager->setValue(hProp, 0);
d_ptr->m_intPropertyManager->setMinimum(hProp, 0);
d_ptr->m_propertyToH[property] = hProp;
d_ptr->m_hToProperty[hProp] = property;
property->addSubProperty(hProp);
}
/**
\reimp
*/
void QtRectPropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *xProp = d_ptr->m_propertyToX[property];
if (xProp) {
d_ptr->m_xToProperty.remove(xProp);
delete xProp;
}
d_ptr->m_propertyToX.remove(property);
QtProperty *yProp = d_ptr->m_propertyToY[property];
if (yProp) {
d_ptr->m_yToProperty.remove(yProp);
delete yProp;
}
d_ptr->m_propertyToY.remove(property);
QtProperty *wProp = d_ptr->m_propertyToW[property];
if (wProp) {
d_ptr->m_wToProperty.remove(wProp);
delete wProp;
}
d_ptr->m_propertyToW.remove(property);
QtProperty *hProp = d_ptr->m_propertyToH[property];
if (hProp) {
d_ptr->m_hToProperty.remove(hProp);
delete hProp;
}
d_ptr->m_propertyToH.remove(property);
d_ptr->m_values.remove(property);
}
// QtRectFPropertyManager
void QtRectFPropertyManagerPrivate::slotDoubleChanged(QtProperty *property, double value)
{
if (QtProperty *prop = m_xToProperty.value(property, 0)) {
QRectF r = m_values[prop].val;
r.moveLeft(value);
q_ptr->setValue(prop, r);
} else if (QtProperty *prop = m_yToProperty.value(property, 0)) {
QRectF r = m_values[prop].val;
r.moveTop(value);
q_ptr->setValue(prop, r);
} else if (QtProperty *prop = m_wToProperty.value(property, 0)) {
Data data = m_values[prop];
QRectF r = data.val;
r.setWidth(value);
if (!data.constraint.isNull() && data.constraint.x() + data.constraint.width() < r.x() + r.width()) {
r.moveLeft(data.constraint.left() + data.constraint.width() - r.width());
}
q_ptr->setValue(prop, r);
} else if (QtProperty *prop = m_hToProperty.value(property, 0)) {
Data data = m_values[prop];
QRectF r = data.val;
r.setHeight(value);
if (!data.constraint.isNull() && data.constraint.y() + data.constraint.height() < r.y() + r.height()) {
r.moveTop(data.constraint.top() + data.constraint.height() - r.height());
}
q_ptr->setValue(prop, r);
}
}
void QtRectFPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_xToProperty.value(property, 0)) {
m_propertyToX[pointProp] = 0;
m_xToProperty.remove(property);
} else if (QtProperty *pointProp = m_yToProperty.value(property, 0)) {
m_propertyToY[pointProp] = 0;
m_yToProperty.remove(property);
} else if (QtProperty *pointProp = m_wToProperty.value(property, 0)) {
m_propertyToW[pointProp] = 0;
m_wToProperty.remove(property);
} else if (QtProperty *pointProp = m_hToProperty.value(property, 0)) {
m_propertyToH[pointProp] = 0;
m_hToProperty.remove(property);
}
}
void QtRectFPropertyManagerPrivate::setConstraint(QtProperty *property,
const QRectF &constraint, const QRectF &val)
{
const bool isNull = constraint.isNull();
const qreal left = isNull ? FLT_MIN : constraint.left();
const qreal right = isNull ? FLT_MAX : constraint.left() + constraint.width();
const qreal top = isNull ? FLT_MIN : constraint.top();
const qreal bottom = isNull ? FLT_MAX : constraint.top() + constraint.height();
const qreal width = isNull ? FLT_MAX : constraint.width();
const qreal height = isNull ? FLT_MAX : constraint.height();
m_doublePropertyManager->setRange(m_propertyToX[property], left, right);
m_doublePropertyManager->setRange(m_propertyToY[property], top, bottom);
m_doublePropertyManager->setRange(m_propertyToW[property], 0, width);
m_doublePropertyManager->setRange(m_propertyToH[property], 0, height);
m_doublePropertyManager->setValue(m_propertyToX[property], val.x());
m_doublePropertyManager->setValue(m_propertyToY[property], val.y());
m_doublePropertyManager->setValue(m_propertyToW[property], val.width());
m_doublePropertyManager->setValue(m_propertyToH[property], val.height());
}
/**
\class QtRectFPropertyManager
\brief The QtRectFPropertyManager provides and manages QRectF properties.
A rectangle property has nested \e x, \e y, \e width and \e height
subproperties. The top-level property's value can be retrieved
using the value() function, and set using the setValue() slot.
The subproperties are created by a QtDoublePropertyManager object. This
manager can be retrieved using the subDoublePropertyManager() function. In
order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
A rectangle property also has a constraint rectangle which can be
retrieved using the constraint() function, and set using the
setConstraint() slot.
In addition, QtRectFPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes, and the constraintChanged() signal which is emitted
whenever such a property changes its constraint rectangle.
\sa QtAbstractPropertyManager, QtDoublePropertyManager, QtRectPropertyManager
*/
/**
\fn void QtRectFPropertyManager::valueChanged(QtProperty *property, const QRectF &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtRectFPropertyManager::constraintChanged(QtProperty *property, const QRectF &constraint)
This signal is emitted whenever property changes its constraint
rectangle, passing a pointer to the \a property and the new \a
constraint rectangle as parameters.
\sa setConstraint()
*/
/**
\fn void QtRectFPropertyManager::decimalsChanged(QtProperty *property, int prec)
This signal is emitted whenever a property created by this manager
changes its precision of value, passing a pointer to the
\a property and the new \a prec value
\sa setDecimals()
*/
/**
Creates a manager with the given \a parent.
*/
QtRectFPropertyManager::QtRectFPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtRectFPropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_doublePropertyManager = new QtDoublePropertyManager(this);
connect(d_ptr->m_doublePropertyManager, SIGNAL(valueChanged(QtProperty *, double)),
this, SLOT(slotDoubleChanged(QtProperty *, double)));
connect(d_ptr->m_doublePropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtRectFPropertyManager::~QtRectFPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the nested \e x, \e y, \e width
and \e height subproperties.
In order to provide editing widgets for the mentioned
subproperties in a property browser widget, this manager must be
associated with an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtDoublePropertyManager *QtRectFPropertyManager::subDoublePropertyManager() const
{
return d_ptr->m_doublePropertyManager;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns an invalid rectangle.
\sa setValue(), constraint()
*/
QRectF QtRectFPropertyManager::value(const QtProperty *property) const
{
return getValue<QRectF>(d_ptr->m_values, property);
}
/**
Returns the given \a property's precision, in decimals.
\sa setDecimals()
*/
int QtRectFPropertyManager::decimals(const QtProperty *property) const
{
return getData<int>(d_ptr->m_values, &QtRectFPropertyManagerPrivate::Data::decimals, property, 0);
}
/**
Returns the given \a property's constraining rectangle. If returned value is null QRectF it means there is no constraint applied.
\sa value(), setConstraint()
*/
QRectF QtRectFPropertyManager::constraint(const QtProperty *property) const
{
return getData<QRectF>(d_ptr->m_values, &QtRectFPropertyManagerPrivate::Data::constraint, property, QRect());
}
/**
\reimp
*/
QString QtRectFPropertyManager::valueText(const QtProperty *property) const
{
const QtRectFPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QRectF v = it.value().val;
const int dec = it.value().decimals;
return QString(tr("[(%1, %2), %3 x %4]").arg(QString::number(v.x(), 'f', dec))
.arg(QString::number(v.y(), 'f', dec))
.arg(QString::number(v.width(), 'f', dec))
.arg(QString::number(v.height(), 'f', dec)));
}
/**
\fn void QtRectFPropertyManager::setValue(QtProperty *property, const QRectF &value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
If the specified \a value is not inside the given \a property's
constraining rectangle, the value is adjusted accordingly to fit
within the constraint.
\sa value(), setConstraint(), valueChanged()
*/
void QtRectFPropertyManager::setValue(QtProperty *property, const QRectF &val)
{
const QtRectFPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtRectFPropertyManagerPrivate::Data data = it.value();
QRectF newRect = val.normalized();
if (!data.constraint.isNull() && !data.constraint.contains(newRect)) {
const QRectF r1 = data.constraint;
const QRectF r2 = newRect;
newRect.setLeft(qMax(r1.left(), r2.left()));
newRect.setRight(qMin(r1.right(), r2.right()));
newRect.setTop(qMax(r1.top(), r2.top()));
newRect.setBottom(qMin(r1.bottom(), r2.bottom()));
if (newRect.width() < 0 || newRect.height() < 0)
return;
}
if (data.val == newRect)
return;
data.val = newRect;
it.value() = data;
d_ptr->m_doublePropertyManager->setValue(d_ptr->m_propertyToX[property], newRect.x());
d_ptr->m_doublePropertyManager->setValue(d_ptr->m_propertyToY[property], newRect.y());
d_ptr->m_doublePropertyManager->setValue(d_ptr->m_propertyToW[property], newRect.width());
d_ptr->m_doublePropertyManager->setValue(d_ptr->m_propertyToH[property], newRect.height());
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
Sets the given \a property's constraining rectangle to \a
constraint.
When setting the constraint, the current value is adjusted if
necessary (ensuring that the current rectangle value is inside the
constraint). In order to reset the constraint pass a null QRectF value.
\sa setValue(), constraint(), constraintChanged()
*/
void QtRectFPropertyManager::setConstraint(QtProperty *property, const QRectF &constraint)
{
const QtRectFPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtRectFPropertyManagerPrivate::Data data = it.value();
QRectF newConstraint = constraint.normalized();
if (data.constraint == newConstraint)
return;
const QRectF oldVal = data.val;
data.constraint = newConstraint;
if (!data.constraint.isNull() && !data.constraint.contains(oldVal)) {
QRectF r1 = data.constraint;
QRectF r2 = data.val;
if (r2.width() > r1.width())
r2.setWidth(r1.width());
if (r2.height() > r1.height())
r2.setHeight(r1.height());
if (r2.left() < r1.left())
r2.moveLeft(r1.left());
else if (r2.right() > r1.right())
r2.moveRight(r1.right());
if (r2.top() < r1.top())
r2.moveTop(r1.top());
else if (r2.bottom() > r1.bottom())
r2.moveBottom(r1.bottom());
data.val = r2;
}
it.value() = data;
emit constraintChanged(property, data.constraint);
d_ptr->setConstraint(property, data.constraint, data.val);
if (data.val == oldVal)
return;
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
\fn void QtRectFPropertyManager::setDecimals(QtProperty *property, int prec)
Sets the precision of the given \a property to \a prec.
The valid decimal range is 0-13. The default is 2.
\sa decimals()
*/
void QtRectFPropertyManager::setDecimals(QtProperty *property, int prec)
{
const QtRectFPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtRectFPropertyManagerPrivate::Data data = it.value();
if (prec > 13)
prec = 13;
else if (prec < 0)
prec = 0;
if (data.decimals == prec)
return;
data.decimals = prec;
d_ptr->m_doublePropertyManager->setDecimals(d_ptr->m_propertyToX[property], prec);
d_ptr->m_doublePropertyManager->setDecimals(d_ptr->m_propertyToY[property], prec);
d_ptr->m_doublePropertyManager->setDecimals(d_ptr->m_propertyToW[property], prec);
d_ptr->m_doublePropertyManager->setDecimals(d_ptr->m_propertyToH[property], prec);
it.value() = data;
emit decimalsChanged(property, data.decimals);
}
/**
\reimp
*/
void QtRectFPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtRectFPropertyManagerPrivate::Data();
QtProperty *xProp = d_ptr->m_doublePropertyManager->addProperty();
xProp->setPropertyName(tr("X"));
d_ptr->m_doublePropertyManager->setDecimals(xProp, decimals(property));
d_ptr->m_doublePropertyManager->setValue(xProp, 0);
d_ptr->m_propertyToX[property] = xProp;
d_ptr->m_xToProperty[xProp] = property;
property->addSubProperty(xProp);
QtProperty *yProp = d_ptr->m_doublePropertyManager->addProperty();
yProp->setPropertyName(tr("Y"));
d_ptr->m_doublePropertyManager->setDecimals(yProp, decimals(property));
d_ptr->m_doublePropertyManager->setValue(yProp, 0);
d_ptr->m_propertyToY[property] = yProp;
d_ptr->m_yToProperty[yProp] = property;
property->addSubProperty(yProp);
QtProperty *wProp = d_ptr->m_doublePropertyManager->addProperty();
wProp->setPropertyName(tr("Width"));
d_ptr->m_doublePropertyManager->setDecimals(wProp, decimals(property));
d_ptr->m_doublePropertyManager->setValue(wProp, 0);
d_ptr->m_doublePropertyManager->setMinimum(wProp, 0);
d_ptr->m_propertyToW[property] = wProp;
d_ptr->m_wToProperty[wProp] = property;
property->addSubProperty(wProp);
QtProperty *hProp = d_ptr->m_doublePropertyManager->addProperty();
hProp->setPropertyName(tr("Height"));
d_ptr->m_doublePropertyManager->setDecimals(hProp, decimals(property));
d_ptr->m_doublePropertyManager->setValue(hProp, 0);
d_ptr->m_doublePropertyManager->setMinimum(hProp, 0);
d_ptr->m_propertyToH[property] = hProp;
d_ptr->m_hToProperty[hProp] = property;
property->addSubProperty(hProp);
}
/**
\reimp
*/
void QtRectFPropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *xProp = d_ptr->m_propertyToX[property];
if (xProp) {
d_ptr->m_xToProperty.remove(xProp);
delete xProp;
}
d_ptr->m_propertyToX.remove(property);
QtProperty *yProp = d_ptr->m_propertyToY[property];
if (yProp) {
d_ptr->m_yToProperty.remove(yProp);
delete yProp;
}
d_ptr->m_propertyToY.remove(property);
QtProperty *wProp = d_ptr->m_propertyToW[property];
if (wProp) {
d_ptr->m_wToProperty.remove(wProp);
delete wProp;
}
d_ptr->m_propertyToW.remove(property);
QtProperty *hProp = d_ptr->m_propertyToH[property];
if (hProp) {
d_ptr->m_hToProperty.remove(hProp);
delete hProp;
}
d_ptr->m_propertyToH.remove(property);
d_ptr->m_values.remove(property);
}
// QtEnumPropertyManager
class QtEnumPropertyManagerPrivate
{
QtEnumPropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtEnumPropertyManager)
public:
struct Data
{
Data() : val(-1) {}
int val;
QStringList enumNames;
QMap<int, QIcon> enumIcons;
};
typedef QMap<const QtProperty *, Data> PropertyValueMap;
PropertyValueMap m_values;
};
/**
\class QtEnumPropertyManager
\brief The QtEnumPropertyManager provides and manages enum properties.
Each enum property has an associated list of enum names which can
be retrieved using the enumNames() function, and set using the
corresponding setEnumNames() function. An enum property's value is
represented by an index in this list, and can be retrieved and set
using the value() and setValue() slots respectively.
Each enum value can also have an associated icon. The mapping from
values to icons can be set using the setEnumIcons() function and
queried with the enumIcons() function.
In addition, QtEnumPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes. The enumNamesChanged() or enumIconsChanged() signal is emitted
whenever the list of enum names or icons is altered.
\sa QtAbstractPropertyManager, QtEnumEditorFactory
*/
/**
\fn void QtEnumPropertyManager::valueChanged(QtProperty *property, int value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtEnumPropertyManager::enumNamesChanged(QtProperty *property, const QStringList &names)
This signal is emitted whenever a property created by this manager
changes its enum names, passing a pointer to the \a property and
the new \a names as parameters.
\sa setEnumNames()
*/
/**
\fn void QtEnumPropertyManager::enumIconsChanged(QtProperty *property, const QMap<int, QIcon> &icons)
This signal is emitted whenever a property created by this manager
changes its enum icons, passing a pointer to the \a property and
the new mapping of values to \a icons as parameters.
\sa setEnumIcons()
*/
/**
Creates a manager with the given \a parent.
*/
QtEnumPropertyManager::QtEnumPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtEnumPropertyManagerPrivate;
d_ptr->q_ptr = this;
}
/**
Destroys this manager, and all the properties it has created.
*/
QtEnumPropertyManager::~QtEnumPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value which is an index in the
list returned by enumNames()
If the given property is not managed by this manager, this
function returns -1.
\sa enumNames(), setValue()
*/
int QtEnumPropertyManager::value(const QtProperty *property) const
{
return getValue<int>(d_ptr->m_values, property, -1);
}
/**
Returns the given \a property's list of enum names.
\sa value(), setEnumNames()
*/
QStringList QtEnumPropertyManager::enumNames(const QtProperty *property) const
{
return getData<QStringList>(d_ptr->m_values, &QtEnumPropertyManagerPrivate::Data::enumNames, property, QStringList());
}
/**
Returns the given \a property's map of enum values to their icons.
\sa value(), setEnumIcons()
*/
QMap<int, QIcon> QtEnumPropertyManager::enumIcons(const QtProperty *property) const
{
return getData<QMap<int, QIcon> >(d_ptr->m_values, &QtEnumPropertyManagerPrivate::Data::enumIcons, property, QMap<int, QIcon>());
}
/**
\reimp
*/
QString QtEnumPropertyManager::valueText(const QtProperty *property) const
{
const QtEnumPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QtEnumPropertyManagerPrivate::Data &data = it.value();
const int v = data.val;
if (v >= 0 && v < data.enumNames.count())
return data.enumNames.at(v);
return QString();
}
/**
\reimp
*/
QIcon QtEnumPropertyManager::valueIcon(const QtProperty *property) const
{
const QtEnumPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QIcon();
const QtEnumPropertyManagerPrivate::Data &data = it.value();
const int v = data.val;
return data.enumIcons.value(v);
}
/**
\fn void QtEnumPropertyManager::setValue(QtProperty *property, int value)
Sets the value of the given \a property to \a value.
The specified \a value must be less than the size of the given \a
property's enumNames() list, and larger than (or equal to) 0.
\sa value(), valueChanged()
*/
void QtEnumPropertyManager::setValue(QtProperty *property, int val)
{
const QtEnumPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtEnumPropertyManagerPrivate::Data data = it.value();
if (val >= data.enumNames.count())
return;
if (val < 0 && data.enumNames.count() > 0)
return;
if (val < 0)
val = -1;
if (data.val == val)
return;
data.val = val;
it.value() = data;
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
Sets the given \a property's list of enum names to \a
enumNames. The \a property's current value is reset to 0
indicating the first item of the list.
If the specified \a enumNames list is empty, the \a property's
current value is set to -1.
\sa enumNames(), enumNamesChanged()
*/
void QtEnumPropertyManager::setEnumNames(QtProperty *property, const QStringList &enumNames)
{
const QtEnumPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtEnumPropertyManagerPrivate::Data data = it.value();
if (data.enumNames == enumNames)
return;
data.enumNames = enumNames;
data.val = -1;
if (enumNames.count() > 0)
data.val = 0;
it.value() = data;
emit enumNamesChanged(property, data.enumNames);
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
Sets the given \a property's map of enum values to their icons to \a
enumIcons.
Each enum value can have associated icon. This association is represented with passed \a enumIcons map.
\sa enumNames(), enumNamesChanged()
*/
void QtEnumPropertyManager::setEnumIcons(QtProperty *property, const QMap<int, QIcon> &enumIcons)
{
const QtEnumPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
it.value().enumIcons = enumIcons;
emit enumIconsChanged(property, it.value().enumIcons);
emit propertyChanged(property);
}
/**
\reimp
*/
void QtEnumPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtEnumPropertyManagerPrivate::Data();
}
/**
\reimp
*/
void QtEnumPropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
// QtFlagPropertyManager
void QtFlagPropertyManagerPrivate::slotBoolChanged(QtProperty *property, bool value)
{
QtProperty *prop = m_flagToProperty.value(property, 0);
if (prop == 0)
return;
QListIterator<QtProperty *> itProp(m_propertyToFlags[prop]);
int level = 0;
while (itProp.hasNext()) {
QtProperty *p = itProp.next();
if (p == property) {
int v = m_values[prop].val;
if (value) {
v |= (1 << level);
} else {
v &= ~(1 << level);
}
q_ptr->setValue(prop, v);
return;
}
level++;
}
}
void QtFlagPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
QtProperty *flagProperty = m_flagToProperty.value(property, 0);
if (flagProperty == 0)
return;
m_propertyToFlags[flagProperty].replace(m_propertyToFlags[flagProperty].indexOf(property), 0);
m_flagToProperty.remove(property);
}
/**
\class QtFlagPropertyManager
\brief The QtFlagPropertyManager provides and manages flag properties.
Each flag property has an associated list of flag names which can
be retrieved using the flagNames() function, and set using the
corresponding setFlagNames() function.
The flag manager provides properties with nested boolean
subproperties representing each flag, i.e. a flag property's value
is the binary combination of the subproperties' values. A
property's value can be retrieved and set using the value() and
setValue() slots respectively. The combination of flags is represented
by single int value - that's why it's possible to store up to
32 independent flags in one flag property.
The subproperties are created by a QtBoolPropertyManager object. This
manager can be retrieved using the subBoolPropertyManager() function. In
order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
In addition, QtFlagPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes, and the flagNamesChanged() signal which is emitted
whenever the list of flag names is altered.
\sa QtAbstractPropertyManager, QtBoolPropertyManager
*/
/**
\fn void QtFlagPropertyManager::valueChanged(QtProperty *property, int value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
\fn void QtFlagPropertyManager::flagNamesChanged(QtProperty *property, const QStringList &names)
This signal is emitted whenever a property created by this manager
changes its flag names, passing a pointer to the \a property and the
new \a names as parameters.
\sa setFlagNames()
*/
/**
Creates a manager with the given \a parent.
*/
QtFlagPropertyManager::QtFlagPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtFlagPropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_boolPropertyManager = new QtBoolPropertyManager(this);
connect(d_ptr->m_boolPropertyManager, SIGNAL(valueChanged(QtProperty *, bool)),
this, SLOT(slotBoolChanged(QtProperty *, bool)));
connect(d_ptr->m_boolPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtFlagPropertyManager::~QtFlagPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that produces the nested boolean subproperties
representing each flag.
In order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtBoolPropertyManager *QtFlagPropertyManager::subBoolPropertyManager() const
{
return d_ptr->m_boolPropertyManager;
}
/**
Returns the given \a property's value.
If the given property is not managed by this manager, this
function returns 0.
\sa flagNames(), setValue()
*/
int QtFlagPropertyManager::value(const QtProperty *property) const
{
return getValue<int>(d_ptr->m_values, property, 0);
}
/**
Returns the given \a property's list of flag names.
\sa value(), setFlagNames()
*/
QStringList QtFlagPropertyManager::flagNames(const QtProperty *property) const
{
return getData<QStringList>(d_ptr->m_values, &QtFlagPropertyManagerPrivate::Data::flagNames, property, QStringList());
}
/**
\reimp
*/
QString QtFlagPropertyManager::valueText(const QtProperty *property) const
{
const QtFlagPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QtFlagPropertyManagerPrivate::Data &data = it.value();
QString str;
int level = 0;
const QChar bar = QLatin1Char('|');
const QStringList::const_iterator fncend = data.flagNames.constEnd();
for (QStringList::const_iterator it = data.flagNames.constBegin(); it != fncend; ++it) {
if (data.val & (1 << level)) {
if (!str.isEmpty())
str += bar;
str += *it;
}
level++;
}
return str;
}
/**
\fn void QtFlagPropertyManager::setValue(QtProperty *property, int value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
The specified \a value must be less than the binary combination of
the property's flagNames() list size (i.e. less than 2\sup n,
where \c n is the size of the list) and larger than (or equal to)
0.
\sa value(), valueChanged()
*/
void QtFlagPropertyManager::setValue(QtProperty *property, int val)
{
const QtFlagPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtFlagPropertyManagerPrivate::Data data = it.value();
if (data.val == val)
return;
if (val > (1 << data.flagNames.count()) - 1)
return;
if (val < 0)
return;
data.val = val;
it.value() = data;
QListIterator<QtProperty *> itProp(d_ptr->m_propertyToFlags[property]);
int level = 0;
while (itProp.hasNext()) {
QtProperty *prop = itProp.next();
if (prop)
d_ptr->m_boolPropertyManager->setValue(prop, val & (1 << level));
level++;
}
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
Sets the given \a property's list of flag names to \a flagNames. The
property's current value is reset to 0 indicating the first item
of the list.
\sa flagNames(), flagNamesChanged()
*/
void QtFlagPropertyManager::setFlagNames(QtProperty *property, const QStringList &flagNames)
{
const QtFlagPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
QtFlagPropertyManagerPrivate::Data data = it.value();
if (data.flagNames == flagNames)
return;
data.flagNames = flagNames;
data.val = 0;
it.value() = data;
QListIterator<QtProperty *> itProp(d_ptr->m_propertyToFlags[property]);
while (itProp.hasNext()) {
QtProperty *prop = itProp.next();
if (prop) {
delete prop;
d_ptr->m_flagToProperty.remove(prop);
}
}
d_ptr->m_propertyToFlags[property].clear();
QStringListIterator itFlag(flagNames);
while (itFlag.hasNext()) {
const QString flagName = itFlag.next();
QtProperty *prop = d_ptr->m_boolPropertyManager->addProperty();
prop->setPropertyName(flagName);
property->addSubProperty(prop);
d_ptr->m_propertyToFlags[property].append(prop);
d_ptr->m_flagToProperty[prop] = property;
}
emit flagNamesChanged(property, data.flagNames);
emit propertyChanged(property);
emit valueChanged(property, data.val);
}
/**
\reimp
*/
void QtFlagPropertyManager::initializeProperty(QtProperty *property)
{
d_ptr->m_values[property] = QtFlagPropertyManagerPrivate::Data();
d_ptr->m_propertyToFlags[property] = QList<QtProperty *>();
}
/**
\reimp
*/
void QtFlagPropertyManager::uninitializeProperty(QtProperty *property)
{
QListIterator<QtProperty *> itProp(d_ptr->m_propertyToFlags[property]);
while (itProp.hasNext()) {
QtProperty *prop = itProp.next();
if (prop) {
delete prop;
d_ptr->m_flagToProperty.remove(prop);
}
}
d_ptr->m_propertyToFlags.remove(property);
d_ptr->m_values.remove(property);
}
// QtSizePolicyPropertyManager
QtSizePolicyPropertyManagerPrivate::QtSizePolicyPropertyManagerPrivate()
{
}
void QtSizePolicyPropertyManagerPrivate::slotIntChanged(QtProperty *property, int value)
{
if (QtProperty *prop = m_hStretchToProperty.value(property, 0)) {
QSizePolicy sp = m_values[prop];
sp.setHorizontalStretch(static_cast<uchar>(value));
q_ptr->setValue(prop, sp);
} else if (QtProperty *prop = m_vStretchToProperty.value(property, 0)) {
QSizePolicy sp = m_values[prop];
sp.setVerticalStretch(static_cast<uchar>(value));
q_ptr->setValue(prop, sp);
}
}
void QtSizePolicyPropertyManagerPrivate::slotEnumChanged(QtProperty *property, int value)
{
if (QtProperty *prop = m_hPolicyToProperty.value(property, 0)) {
QSizePolicy sp = m_values[prop];
sp.setHorizontalPolicy(metaEnumProvider()->indexToSizePolicy(value));
q_ptr->setValue(prop, sp);
} else if (QtProperty *prop = m_vPolicyToProperty.value(property, 0)) {
QSizePolicy sp = m_values[prop];
sp.setVerticalPolicy(metaEnumProvider()->indexToSizePolicy(value));
q_ptr->setValue(prop, sp);
}
}
void QtSizePolicyPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_hStretchToProperty.value(property, 0)) {
m_propertyToHStretch[pointProp] = 0;
m_hStretchToProperty.remove(property);
} else if (QtProperty *pointProp = m_vStretchToProperty.value(property, 0)) {
m_propertyToVStretch[pointProp] = 0;
m_vStretchToProperty.remove(property);
} else if (QtProperty *pointProp = m_hPolicyToProperty.value(property, 0)) {
m_propertyToHPolicy[pointProp] = 0;
m_hPolicyToProperty.remove(property);
} else if (QtProperty *pointProp = m_vPolicyToProperty.value(property, 0)) {
m_propertyToVPolicy[pointProp] = 0;
m_vPolicyToProperty.remove(property);
}
}
/**
\class QtSizePolicyPropertyManager
\brief The QtSizePolicyPropertyManager provides and manages QSizePolicy properties.
A size policy property has nested \e horizontalPolicy, \e
verticalPolicy, \e horizontalStretch and \e verticalStretch
subproperties. The top-level property's value can be retrieved
using the value() function, and set using the setValue() slot.
The subproperties are created by QtIntPropertyManager and QtEnumPropertyManager
objects. These managers can be retrieved using the subIntPropertyManager()
and subEnumPropertyManager() functions respectively. In order to provide
editing widgets for the subproperties in a property browser widget,
these managers must be associated with editor factories.
In addition, QtSizePolicyPropertyManager provides the valueChanged()
signal which is emitted whenever a property created by this
manager changes.
\sa QtAbstractPropertyManager, QtIntPropertyManager, QtEnumPropertyManager
*/
/**
\fn void QtSizePolicyPropertyManager::valueChanged(QtProperty *property, const QSizePolicy &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the
new \a value as parameters.
\sa setValue()
*/
/**
Creates a manager with the given \a parent.
*/
QtSizePolicyPropertyManager::QtSizePolicyPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtSizePolicyPropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_intPropertyManager = new QtIntPropertyManager(this);
connect(d_ptr->m_intPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotIntChanged(QtProperty *, int)));
d_ptr->m_enumPropertyManager = new QtEnumPropertyManager(this);
connect(d_ptr->m_enumPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotEnumChanged(QtProperty *, int)));
connect(d_ptr->m_intPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
connect(d_ptr->m_enumPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtSizePolicyPropertyManager::~QtSizePolicyPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the nested \e horizontalStretch
and \e verticalStretch subproperties.
In order to provide editing widgets for the mentioned subproperties
in a property browser widget, this manager must be associated with
an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtIntPropertyManager *QtSizePolicyPropertyManager::subIntPropertyManager() const
{
return d_ptr->m_intPropertyManager;
}
/**
Returns the manager that creates the nested \e horizontalPolicy
and \e verticalPolicy subproperties.
In order to provide editing widgets for the mentioned subproperties
in a property browser widget, this manager must be associated with
an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtEnumPropertyManager *QtSizePolicyPropertyManager::subEnumPropertyManager() const
{
return d_ptr->m_enumPropertyManager;
}
/**
Returns the given \a property's value.
If the given property is not managed by this manager, this
function returns the default size policy.
\sa setValue()
*/
QSizePolicy QtSizePolicyPropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QSizePolicy());
}
/**
\reimp
*/
QString QtSizePolicyPropertyManager::valueText(const QtProperty *property) const
{
const QtSizePolicyPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
const QSizePolicy sp = it.value();
const QtMetaEnumProvider *mep = metaEnumProvider();
const int hIndex = mep->sizePolicyToIndex(sp.horizontalPolicy());
const int vIndex = mep->sizePolicyToIndex(sp.verticalPolicy());
//! Unknown size policy on reading invalid uic3 files
const QString hPolicy = hIndex != -1 ? mep->policyEnumNames().at(hIndex) : tr("<Invalid>");
const QString vPolicy = vIndex != -1 ? mep->policyEnumNames().at(vIndex) : tr("<Invalid>");
const QString str = tr("[%1, %2, %3, %4]").arg(hPolicy, vPolicy).arg(sp.horizontalStretch()).arg(sp.verticalStretch());
return str;
}
/**
\fn void QtSizePolicyPropertyManager::setValue(QtProperty *property, const QSizePolicy &value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
\sa value(), valueChanged()
*/
void QtSizePolicyPropertyManager::setValue(QtProperty *property, const QSizePolicy &val)
{
const QtSizePolicyPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
if (it.value() == val)
return;
it.value() = val;
d_ptr->m_enumPropertyManager->setValue(d_ptr->m_propertyToHPolicy[property],
metaEnumProvider()->sizePolicyToIndex(val.horizontalPolicy()));
d_ptr->m_enumPropertyManager->setValue(d_ptr->m_propertyToVPolicy[property],
metaEnumProvider()->sizePolicyToIndex(val.verticalPolicy()));
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToHStretch[property],
val.horizontalStretch());
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToVStretch[property],
val.verticalStretch());
emit propertyChanged(property);
emit valueChanged(property, val);
}
/**
\reimp
*/
void QtSizePolicyPropertyManager::initializeProperty(QtProperty *property)
{
QSizePolicy val;
d_ptr->m_values[property] = val;
QtProperty *hPolicyProp = d_ptr->m_enumPropertyManager->addProperty();
hPolicyProp->setPropertyName(tr("Horizontal Policy"));
d_ptr->m_enumPropertyManager->setEnumNames(hPolicyProp, metaEnumProvider()->policyEnumNames());
d_ptr->m_enumPropertyManager->setValue(hPolicyProp,
metaEnumProvider()->sizePolicyToIndex(val.horizontalPolicy()));
d_ptr->m_propertyToHPolicy[property] = hPolicyProp;
d_ptr->m_hPolicyToProperty[hPolicyProp] = property;
property->addSubProperty(hPolicyProp);
QtProperty *vPolicyProp = d_ptr->m_enumPropertyManager->addProperty();
vPolicyProp->setPropertyName(tr("Vertical Policy"));
d_ptr->m_enumPropertyManager->setEnumNames(vPolicyProp, metaEnumProvider()->policyEnumNames());
d_ptr->m_enumPropertyManager->setValue(vPolicyProp,
metaEnumProvider()->sizePolicyToIndex(val.verticalPolicy()));
d_ptr->m_propertyToVPolicy[property] = vPolicyProp;
d_ptr->m_vPolicyToProperty[vPolicyProp] = property;
property->addSubProperty(vPolicyProp);
QtProperty *hStretchProp = d_ptr->m_intPropertyManager->addProperty();
hStretchProp->setPropertyName(tr("Horizontal Stretch"));
d_ptr->m_intPropertyManager->setValue(hStretchProp, val.horizontalStretch());
d_ptr->m_intPropertyManager->setRange(hStretchProp, 0, 0xff);
d_ptr->m_propertyToHStretch[property] = hStretchProp;
d_ptr->m_hStretchToProperty[hStretchProp] = property;
property->addSubProperty(hStretchProp);
QtProperty *vStretchProp = d_ptr->m_intPropertyManager->addProperty();
vStretchProp->setPropertyName(tr("Vertical Stretch"));
d_ptr->m_intPropertyManager->setValue(vStretchProp, val.verticalStretch());
d_ptr->m_intPropertyManager->setRange(vStretchProp, 0, 0xff);
d_ptr->m_propertyToVStretch[property] = vStretchProp;
d_ptr->m_vStretchToProperty[vStretchProp] = property;
property->addSubProperty(vStretchProp);
}
/**
\reimp
*/
void QtSizePolicyPropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *hPolicyProp = d_ptr->m_propertyToHPolicy[property];
if (hPolicyProp) {
d_ptr->m_hPolicyToProperty.remove(hPolicyProp);
delete hPolicyProp;
}
d_ptr->m_propertyToHPolicy.remove(property);
QtProperty *vPolicyProp = d_ptr->m_propertyToVPolicy[property];
if (vPolicyProp) {
d_ptr->m_vPolicyToProperty.remove(vPolicyProp);
delete vPolicyProp;
}
d_ptr->m_propertyToVPolicy.remove(property);
QtProperty *hStretchProp = d_ptr->m_propertyToHStretch[property];
if (hStretchProp) {
d_ptr->m_hStretchToProperty.remove(hStretchProp);
delete hStretchProp;
}
d_ptr->m_propertyToHStretch.remove(property);
QtProperty *vStretchProp = d_ptr->m_propertyToVStretch[property];
if (vStretchProp) {
d_ptr->m_vStretchToProperty.remove(vStretchProp);
delete vStretchProp;
}
d_ptr->m_propertyToVStretch.remove(property);
d_ptr->m_values.remove(property);
}
// QtFontPropertyManager:
// QtFontPropertyManagerPrivate has a mechanism for reacting
// to QApplication::fontDatabaseChanged() [4.5], which is emitted
// when someone loads an application font. The signals are compressed
// using a timer with interval 0, which then causes the family
// enumeration manager to re-set its strings and index values
// for each property.
Q_GLOBAL_STATIC(QFontDatabase, fontDatabase)
QtFontPropertyManagerPrivate::QtFontPropertyManagerPrivate() :
m_settingValue(false),
m_fontDatabaseChangeTimer(0)
{
}
void QtFontPropertyManagerPrivate::slotIntChanged(QtProperty *property, int value)
{
if (m_settingValue)
return;
if (QtProperty *prop = m_pointSizeToProperty.value(property, 0)) {
QFont f = m_values[prop];
f.setPointSize(value);
q_ptr->setValue(prop, f);
}
}
void QtFontPropertyManagerPrivate::slotEnumChanged(QtProperty *property, int value)
{
if (m_settingValue)
return;
if (QtProperty *prop = m_familyToProperty.value(property, 0)) {
QFont f = m_values[prop];
f.setFamily(m_familyNames.at(value));
q_ptr->setValue(prop, f);
}
}
void QtFontPropertyManagerPrivate::slotBoolChanged(QtProperty *property, bool value)
{
if (m_settingValue)
return;
if (QtProperty *prop = m_boldToProperty.value(property, 0)) {
QFont f = m_values[prop];
f.setBold(value);
q_ptr->setValue(prop, f);
} else if (QtProperty *prop = m_italicToProperty.value(property, 0)) {
QFont f = m_values[prop];
f.setItalic(value);
q_ptr->setValue(prop, f);
} else if (QtProperty *prop = m_underlineToProperty.value(property, 0)) {
QFont f = m_values[prop];
f.setUnderline(value);
q_ptr->setValue(prop, f);
} else if (QtProperty *prop = m_strikeOutToProperty.value(property, 0)) {
QFont f = m_values[prop];
f.setStrikeOut(value);
q_ptr->setValue(prop, f);
} else if (QtProperty *prop = m_kerningToProperty.value(property, 0)) {
QFont f = m_values[prop];
f.setKerning(value);
q_ptr->setValue(prop, f);
}
}
void QtFontPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_pointSizeToProperty.value(property, 0)) {
m_propertyToPointSize[pointProp] = 0;
m_pointSizeToProperty.remove(property);
} else if (QtProperty *pointProp = m_familyToProperty.value(property, 0)) {
m_propertyToFamily[pointProp] = 0;
m_familyToProperty.remove(property);
} else if (QtProperty *pointProp = m_boldToProperty.value(property, 0)) {
m_propertyToBold[pointProp] = 0;
m_boldToProperty.remove(property);
} else if (QtProperty *pointProp = m_italicToProperty.value(property, 0)) {
m_propertyToItalic[pointProp] = 0;
m_italicToProperty.remove(property);
} else if (QtProperty *pointProp = m_underlineToProperty.value(property, 0)) {
m_propertyToUnderline[pointProp] = 0;
m_underlineToProperty.remove(property);
} else if (QtProperty *pointProp = m_strikeOutToProperty.value(property, 0)) {
m_propertyToStrikeOut[pointProp] = 0;
m_strikeOutToProperty.remove(property);
} else if (QtProperty *pointProp = m_kerningToProperty.value(property, 0)) {
m_propertyToKerning[pointProp] = 0;
m_kerningToProperty.remove(property);
}
}
void QtFontPropertyManagerPrivate::slotFontDatabaseChanged()
{
if (!m_fontDatabaseChangeTimer) {
m_fontDatabaseChangeTimer = new QTimer(q_ptr);
m_fontDatabaseChangeTimer->setInterval(0);
m_fontDatabaseChangeTimer->setSingleShot(true);
QObject::connect(m_fontDatabaseChangeTimer, SIGNAL(timeout()), q_ptr, SLOT(slotFontDatabaseDelayedChange()));
}
if (!m_fontDatabaseChangeTimer->isActive())
m_fontDatabaseChangeTimer->start();
}
void QtFontPropertyManagerPrivate::slotFontDatabaseDelayedChange()
{
typedef QMap<const QtProperty *, QtProperty *> PropertyPropertyMap;
// rescan available font names
const QStringList oldFamilies = m_familyNames;
m_familyNames = fontDatabase()->families();
// Adapt all existing properties
if (!m_propertyToFamily.empty()) {
PropertyPropertyMap::const_iterator cend = m_propertyToFamily.constEnd();
for (PropertyPropertyMap::const_iterator it = m_propertyToFamily.constBegin(); it != cend; ++it) {
QtProperty *familyProp = it.value();
const int oldIdx = m_enumPropertyManager->value(familyProp);
int newIdx = m_familyNames.indexOf(oldFamilies.at(oldIdx));
if (newIdx < 0)
newIdx = 0;
m_enumPropertyManager->setEnumNames(familyProp, m_familyNames);
m_enumPropertyManager->setValue(familyProp, newIdx);
}
}
}
/**
\class QtFontPropertyManager
\brief The QtFontPropertyManager provides and manages QFont properties.
A font property has nested \e family, \e pointSize, \e bold, \e
italic, \e underline, \e strikeOut and \e kerning subproperties. The top-level
property's value can be retrieved using the value() function, and
set using the setValue() slot.
The subproperties are created by QtIntPropertyManager, QtEnumPropertyManager and
QtBoolPropertyManager objects. These managers can be retrieved using the
corresponding subIntPropertyManager(), subEnumPropertyManager() and
subBoolPropertyManager() functions. In order to provide editing widgets
for the subproperties in a property browser widget, these managers
must be associated with editor factories.
In addition, QtFontPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes.
\sa QtAbstractPropertyManager, QtEnumPropertyManager, QtIntPropertyManager, QtBoolPropertyManager
*/
/**
\fn void QtFontPropertyManager::valueChanged(QtProperty *property, const QFont &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the
new \a value as parameters.
\sa setValue()
*/
/**
Creates a manager with the given \a parent.
*/
QtFontPropertyManager::QtFontPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtFontPropertyManagerPrivate;
d_ptr->q_ptr = this;
#if QT_VERSION >= 0x040500
QObject::connect(qApp, SIGNAL(fontDatabaseChanged()), this, SLOT(slotFontDatabaseChanged()));
#endif
d_ptr->m_intPropertyManager = new QtIntPropertyManager(this);
connect(d_ptr->m_intPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotIntChanged(QtProperty *, int)));
d_ptr->m_enumPropertyManager = new QtEnumPropertyManager(this);
connect(d_ptr->m_enumPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotEnumChanged(QtProperty *, int)));
d_ptr->m_boolPropertyManager = new QtBoolPropertyManager(this);
connect(d_ptr->m_boolPropertyManager, SIGNAL(valueChanged(QtProperty *, bool)),
this, SLOT(slotBoolChanged(QtProperty *, bool)));
connect(d_ptr->m_intPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
connect(d_ptr->m_enumPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
connect(d_ptr->m_boolPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtFontPropertyManager::~QtFontPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that creates the \e pointSize subproperty.
In order to provide editing widgets for the \e pointSize property
in a property browser widget, this manager must be associated
with an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtIntPropertyManager *QtFontPropertyManager::subIntPropertyManager() const
{
return d_ptr->m_intPropertyManager;
}
/**
Returns the manager that create the \e family subproperty.
In order to provide editing widgets for the \e family property
in a property browser widget, this manager must be associated
with an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtEnumPropertyManager *QtFontPropertyManager::subEnumPropertyManager() const
{
return d_ptr->m_enumPropertyManager;
}
/**
Returns the manager that creates the \e bold, \e italic, \e underline,
\e strikeOut and \e kerning subproperties.
In order to provide editing widgets for the mentioned properties
in a property browser widget, this manager must be associated with
an editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtBoolPropertyManager *QtFontPropertyManager::subBoolPropertyManager() const
{
return d_ptr->m_boolPropertyManager;
}
/**
Returns the given \a property's value.
If the given property is not managed by this manager, this
function returns a font object that uses the application's default
font.
\sa setValue()
*/
QFont QtFontPropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QFont());
}
/**
\reimp
*/
QString QtFontPropertyManager::valueText(const QtProperty *property) const
{
const QtFontPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return QtPropertyBrowserUtils::fontValueText(it.value());
}
/**
\reimp
*/
QIcon QtFontPropertyManager::valueIcon(const QtProperty *property) const
{
const QtFontPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QIcon();
return QtPropertyBrowserUtils::fontValueIcon(it.value());
}
/**
\fn void QtFontPropertyManager::setValue(QtProperty *property, const QFont &value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
\sa value(), valueChanged()
*/
void QtFontPropertyManager::setValue(QtProperty *property, const QFont &val)
{
const QtFontPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
const QFont oldVal = it.value();
if (oldVal == val && oldVal.resolve() == val.resolve())
return;
it.value() = val;
int idx = d_ptr->m_familyNames.indexOf(val.family());
if (idx == -1)
idx = 0;
bool settingValue = d_ptr->m_settingValue;
d_ptr->m_settingValue = true;
d_ptr->m_enumPropertyManager->setValue(d_ptr->m_propertyToFamily[property], idx);
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToPointSize[property], val.pointSize());
d_ptr->m_boolPropertyManager->setValue(d_ptr->m_propertyToBold[property], val.bold());
d_ptr->m_boolPropertyManager->setValue(d_ptr->m_propertyToItalic[property], val.italic());
d_ptr->m_boolPropertyManager->setValue(d_ptr->m_propertyToUnderline[property], val.underline());
d_ptr->m_boolPropertyManager->setValue(d_ptr->m_propertyToStrikeOut[property], val.strikeOut());
d_ptr->m_boolPropertyManager->setValue(d_ptr->m_propertyToKerning[property], val.kerning());
d_ptr->m_settingValue = settingValue;
emit propertyChanged(property);
emit valueChanged(property, val);
}
/**
\reimp
*/
void QtFontPropertyManager::initializeProperty(QtProperty *property)
{
QFont val;
d_ptr->m_values[property] = val;
QtProperty *familyProp = d_ptr->m_enumPropertyManager->addProperty();
familyProp->setPropertyName(tr("Family"));
if (d_ptr->m_familyNames.empty())
d_ptr->m_familyNames = fontDatabase()->families();
d_ptr->m_enumPropertyManager->setEnumNames(familyProp, d_ptr->m_familyNames);
int idx = d_ptr->m_familyNames.indexOf(val.family());
if (idx == -1)
idx = 0;
d_ptr->m_enumPropertyManager->setValue(familyProp, idx);
d_ptr->m_propertyToFamily[property] = familyProp;
d_ptr->m_familyToProperty[familyProp] = property;
property->addSubProperty(familyProp);
QtProperty *pointSizeProp = d_ptr->m_intPropertyManager->addProperty();
pointSizeProp->setPropertyName(tr("Point Size"));
d_ptr->m_intPropertyManager->setValue(pointSizeProp, val.pointSize());
d_ptr->m_intPropertyManager->setMinimum(pointSizeProp, 1);
d_ptr->m_propertyToPointSize[property] = pointSizeProp;
d_ptr->m_pointSizeToProperty[pointSizeProp] = property;
property->addSubProperty(pointSizeProp);
QtProperty *boldProp = d_ptr->m_boolPropertyManager->addProperty();
boldProp->setPropertyName(tr("Bold"));
d_ptr->m_boolPropertyManager->setValue(boldProp, val.bold());
d_ptr->m_propertyToBold[property] = boldProp;
d_ptr->m_boldToProperty[boldProp] = property;
property->addSubProperty(boldProp);
QtProperty *italicProp = d_ptr->m_boolPropertyManager->addProperty();
italicProp->setPropertyName(tr("Italic"));
d_ptr->m_boolPropertyManager->setValue(italicProp, val.italic());
d_ptr->m_propertyToItalic[property] = italicProp;
d_ptr->m_italicToProperty[italicProp] = property;
property->addSubProperty(italicProp);
QtProperty *underlineProp = d_ptr->m_boolPropertyManager->addProperty();
underlineProp->setPropertyName(tr("Underline"));
d_ptr->m_boolPropertyManager->setValue(underlineProp, val.underline());
d_ptr->m_propertyToUnderline[property] = underlineProp;
d_ptr->m_underlineToProperty[underlineProp] = property;
property->addSubProperty(underlineProp);
QtProperty *strikeOutProp = d_ptr->m_boolPropertyManager->addProperty();
strikeOutProp->setPropertyName(tr("Strikeout"));
d_ptr->m_boolPropertyManager->setValue(strikeOutProp, val.strikeOut());
d_ptr->m_propertyToStrikeOut[property] = strikeOutProp;
d_ptr->m_strikeOutToProperty[strikeOutProp] = property;
property->addSubProperty(strikeOutProp);
QtProperty *kerningProp = d_ptr->m_boolPropertyManager->addProperty();
kerningProp->setPropertyName(tr("Kerning"));
d_ptr->m_boolPropertyManager->setValue(kerningProp, val.kerning());
d_ptr->m_propertyToKerning[property] = kerningProp;
d_ptr->m_kerningToProperty[kerningProp] = property;
property->addSubProperty(kerningProp);
}
/**
\reimp
*/
void QtFontPropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *familyProp = d_ptr->m_propertyToFamily[property];
if (familyProp) {
d_ptr->m_familyToProperty.remove(familyProp);
delete familyProp;
}
d_ptr->m_propertyToFamily.remove(property);
QtProperty *pointSizeProp = d_ptr->m_propertyToPointSize[property];
if (pointSizeProp) {
d_ptr->m_pointSizeToProperty.remove(pointSizeProp);
delete pointSizeProp;
}
d_ptr->m_propertyToPointSize.remove(property);
QtProperty *boldProp = d_ptr->m_propertyToBold[property];
if (boldProp) {
d_ptr->m_boldToProperty.remove(boldProp);
delete boldProp;
}
d_ptr->m_propertyToBold.remove(property);
QtProperty *italicProp = d_ptr->m_propertyToItalic[property];
if (italicProp) {
d_ptr->m_italicToProperty.remove(italicProp);
delete italicProp;
}
d_ptr->m_propertyToItalic.remove(property);
QtProperty *underlineProp = d_ptr->m_propertyToUnderline[property];
if (underlineProp) {
d_ptr->m_underlineToProperty.remove(underlineProp);
delete underlineProp;
}
d_ptr->m_propertyToUnderline.remove(property);
QtProperty *strikeOutProp = d_ptr->m_propertyToStrikeOut[property];
if (strikeOutProp) {
d_ptr->m_strikeOutToProperty.remove(strikeOutProp);
delete strikeOutProp;
}
d_ptr->m_propertyToStrikeOut.remove(property);
QtProperty *kerningProp = d_ptr->m_propertyToKerning[property];
if (kerningProp) {
d_ptr->m_kerningToProperty.remove(kerningProp);
delete kerningProp;
}
d_ptr->m_propertyToKerning.remove(property);
d_ptr->m_values.remove(property);
}
// QtColorPropertyManager
void QtColorPropertyManagerPrivate::slotIntChanged(QtProperty *property, int value)
{
if (QtProperty *prop = m_rToProperty.value(property, 0)) {
QColor c = m_values[prop];
c.setRed(value);
q_ptr->setValue(prop, c);
} else if (QtProperty *prop = m_gToProperty.value(property, 0)) {
QColor c = m_values[prop];
c.setGreen(value);
q_ptr->setValue(prop, c);
} else if (QtProperty *prop = m_bToProperty.value(property, 0)) {
QColor c = m_values[prop];
c.setBlue(value);
q_ptr->setValue(prop, c);
} else if (QtProperty *prop = m_aToProperty.value(property, 0)) {
QColor c = m_values[prop];
c.setAlpha(value);
q_ptr->setValue(prop, c);
}
}
void QtColorPropertyManagerPrivate::slotPropertyDestroyed(QtProperty *property)
{
if (QtProperty *pointProp = m_rToProperty.value(property, 0)) {
m_propertyToR[pointProp] = 0;
m_rToProperty.remove(property);
} else if (QtProperty *pointProp = m_gToProperty.value(property, 0)) {
m_propertyToG[pointProp] = 0;
m_gToProperty.remove(property);
} else if (QtProperty *pointProp = m_bToProperty.value(property, 0)) {
m_propertyToB[pointProp] = 0;
m_bToProperty.remove(property);
} else if (QtProperty *pointProp = m_aToProperty.value(property, 0)) {
m_propertyToA[pointProp] = 0;
m_aToProperty.remove(property);
}
}
/**
\class QtColorPropertyManager
\brief The QtColorPropertyManager provides and manages QColor properties.
A color property has nested \e red, \e green and \e blue
subproperties. The top-level property's value can be retrieved
using the value() function, and set using the setValue() slot.
The subproperties are created by a QtIntPropertyManager object. This
manager can be retrieved using the subIntPropertyManager() function. In
order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
In addition, QtColorPropertyManager provides the valueChanged() signal
which is emitted whenever a property created by this manager
changes.
\sa QtAbstractPropertyManager, QtAbstractPropertyBrowser, QtIntPropertyManager
*/
/**
\fn void QtColorPropertyManager::valueChanged(QtProperty *property, const QColor &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
Creates a manager with the given \a parent.
*/
QtColorPropertyManager::QtColorPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtColorPropertyManagerPrivate;
d_ptr->q_ptr = this;
d_ptr->m_intPropertyManager = new QtIntPropertyManager(this);
connect(d_ptr->m_intPropertyManager, SIGNAL(valueChanged(QtProperty *, int)),
this, SLOT(slotIntChanged(QtProperty *, int)));
connect(d_ptr->m_intPropertyManager, SIGNAL(propertyDestroyed(QtProperty *)),
this, SLOT(slotPropertyDestroyed(QtProperty *)));
}
/**
Destroys this manager, and all the properties it has created.
*/
QtColorPropertyManager::~QtColorPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the manager that produces the nested \e red, \e green and
\e blue subproperties.
In order to provide editing widgets for the subproperties in a
property browser widget, this manager must be associated with an
editor factory.
\sa QtAbstractPropertyBrowser::setFactoryForManager()
*/
QtIntPropertyManager *QtColorPropertyManager::subIntPropertyManager() const
{
return d_ptr->m_intPropertyManager;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by \e this manager, this
function returns an invalid color.
\sa setValue()
*/
QColor QtColorPropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QColor());
}
/**
\reimp
*/
QString QtColorPropertyManager::valueText(const QtProperty *property) const
{
const QtColorPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return QtPropertyBrowserUtils::colorValueText(it.value());
}
/**
\reimp
*/
QIcon QtColorPropertyManager::valueIcon(const QtProperty *property) const
{
const QtColorPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QIcon();
return QtPropertyBrowserUtils::brushValueIcon(QBrush(it.value()));
}
/**
\fn void QtColorPropertyManager::setValue(QtProperty *property, const QColor &value)
Sets the value of the given \a property to \a value. Nested
properties are updated automatically.
\sa value(), valueChanged()
*/
void QtColorPropertyManager::setValue(QtProperty *property, const QColor &val)
{
const QtColorPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
if (it.value() == val)
return;
it.value() = val;
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToR[property], val.red());
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToG[property], val.green());
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToB[property], val.blue());
d_ptr->m_intPropertyManager->setValue(d_ptr->m_propertyToA[property], val.alpha());
emit propertyChanged(property);
emit valueChanged(property, val);
}
/**
\reimp
*/
void QtColorPropertyManager::initializeProperty(QtProperty *property)
{
QColor val;
d_ptr->m_values[property] = val;
QtProperty *rProp = d_ptr->m_intPropertyManager->addProperty();
rProp->setPropertyName(tr("Red"));
d_ptr->m_intPropertyManager->setValue(rProp, val.red());
d_ptr->m_intPropertyManager->setRange(rProp, 0, 0xFF);
d_ptr->m_propertyToR[property] = rProp;
d_ptr->m_rToProperty[rProp] = property;
property->addSubProperty(rProp);
QtProperty *gProp = d_ptr->m_intPropertyManager->addProperty();
gProp->setPropertyName(tr("Green"));
d_ptr->m_intPropertyManager->setValue(gProp, val.green());
d_ptr->m_intPropertyManager->setRange(gProp, 0, 0xFF);
d_ptr->m_propertyToG[property] = gProp;
d_ptr->m_gToProperty[gProp] = property;
property->addSubProperty(gProp);
QtProperty *bProp = d_ptr->m_intPropertyManager->addProperty();
bProp->setPropertyName(tr("Blue"));
d_ptr->m_intPropertyManager->setValue(bProp, val.blue());
d_ptr->m_intPropertyManager->setRange(bProp, 0, 0xFF);
d_ptr->m_propertyToB[property] = bProp;
d_ptr->m_bToProperty[bProp] = property;
property->addSubProperty(bProp);
QtProperty *aProp = d_ptr->m_intPropertyManager->addProperty();
aProp->setPropertyName(tr("Alpha"));
d_ptr->m_intPropertyManager->setValue(aProp, val.alpha());
d_ptr->m_intPropertyManager->setRange(aProp, 0, 0xFF);
d_ptr->m_propertyToA[property] = aProp;
d_ptr->m_aToProperty[aProp] = property;
property->addSubProperty(aProp);
}
/**
\reimp
*/
void QtColorPropertyManager::uninitializeProperty(QtProperty *property)
{
QtProperty *rProp = d_ptr->m_propertyToR[property];
if (rProp) {
d_ptr->m_rToProperty.remove(rProp);
delete rProp;
}
d_ptr->m_propertyToR.remove(property);
QtProperty *gProp = d_ptr->m_propertyToG[property];
if (gProp) {
d_ptr->m_gToProperty.remove(gProp);
delete gProp;
}
d_ptr->m_propertyToG.remove(property);
QtProperty *bProp = d_ptr->m_propertyToB[property];
if (bProp) {
d_ptr->m_bToProperty.remove(bProp);
delete bProp;
}
d_ptr->m_propertyToB.remove(property);
QtProperty *aProp = d_ptr->m_propertyToA[property];
if (aProp) {
d_ptr->m_aToProperty.remove(aProp);
delete aProp;
}
d_ptr->m_propertyToA.remove(property);
d_ptr->m_values.remove(property);
}
// QtCursorPropertyManager
Q_GLOBAL_STATIC(QtCursorDatabase, cursorDatabase)
class QtCursorPropertyManagerPrivate
{
QtCursorPropertyManager *q_ptr;
Q_DECLARE_PUBLIC(QtCursorPropertyManager)
public:
typedef QMap<const QtProperty *, QCursor> PropertyValueMap;
PropertyValueMap m_values;
};
/**
\class QtCursorPropertyManager
\brief The QtCursorPropertyManager provides and manages QCursor properties.
A cursor property has a current value which can be
retrieved using the value() function, and set using the setValue()
slot. In addition, QtCursorPropertyManager provides the
valueChanged() signal which is emitted whenever a property created
by this manager changes.
\sa QtAbstractPropertyManager
*/
/**
\fn void QtCursorPropertyManager::valueChanged(QtProperty *property, const QCursor &value)
This signal is emitted whenever a property created by this manager
changes its value, passing a pointer to the \a property and the new
\a value as parameters.
\sa setValue()
*/
/**
Creates a manager with the given \a parent.
*/
QtCursorPropertyManager::QtCursorPropertyManager(QObject *parent)
: QtAbstractPropertyManager(parent)
{
d_ptr = new QtCursorPropertyManagerPrivate;
d_ptr->q_ptr = this;
}
/**
Destroys this manager, and all the properties it has created.
*/
QtCursorPropertyManager::~QtCursorPropertyManager()
{
clear();
delete d_ptr;
}
/**
Returns the given \a property's value.
If the given \a property is not managed by this manager, this
function returns a default QCursor object.
\sa setValue()
*/
#ifndef QT_NO_CURSOR
QCursor QtCursorPropertyManager::value(const QtProperty *property) const
{
return d_ptr->m_values.value(property, QCursor());
}
#endif
/**
\reimp
*/
QString QtCursorPropertyManager::valueText(const QtProperty *property) const
{
const QtCursorPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QString();
return cursorDatabase()->cursorToShapeName(it.value());
}
/**
\reimp
*/
QIcon QtCursorPropertyManager::valueIcon(const QtProperty *property) const
{
const QtCursorPropertyManagerPrivate::PropertyValueMap::const_iterator it = d_ptr->m_values.constFind(property);
if (it == d_ptr->m_values.constEnd())
return QIcon();
return cursorDatabase()->cursorToShapeIcon(it.value());
}
/**
\fn void QtCursorPropertyManager::setValue(QtProperty *property, const QCursor &value)
Sets the value of the given \a property to \a value.
\sa value(), valueChanged()
*/
void QtCursorPropertyManager::setValue(QtProperty *property, const QCursor &value)
{
#ifndef QT_NO_CURSOR
const QtCursorPropertyManagerPrivate::PropertyValueMap::iterator it = d_ptr->m_values.find(property);
if (it == d_ptr->m_values.end())
return;
if (it.value().shape() == value.shape() && value.shape() != Qt::BitmapCursor)
return;
it.value() = value;
emit propertyChanged(property);
emit valueChanged(property, value);
#endif
}
/**
\reimp
*/
void QtCursorPropertyManager::initializeProperty(QtProperty *property)
{
#ifndef QT_NO_CURSOR
d_ptr->m_values[property] = QCursor();
#endif
}
/**
\reimp
*/
void QtCursorPropertyManager::uninitializeProperty(QtProperty *property)
{
d_ptr->m_values.remove(property);
}
#if QT_VERSION >= 0x040400
QT_END_NAMESPACE
#endif