# NOTE that there are a lot of places in this CMakeLists where files need to
# be explicitly listed - we not only have to add the sources and headers,
# but also the files that need to be made known to Qt and sip.
###########################################################################
# Add the source files
###########################################################################
set ( QTIPLOT_SRCS src/ApplicationWindow.cpp
src/ArrowMarker.cpp
src/AssociationsDialog.cpp
src/AxesDialog.cpp
src/AxisDetails.cpp
src/Bar.cpp
src/BoxCurve.cpp
src/CanvasPicker.cpp
src/ColorMapDialog.cpp
src/Cone3D.cpp
src/ConfigDialog.cpp
src/ContourLinesEditor.cpp
src/Convolution.cpp
src/Correlation.cpp
src/CurveRangeDialog.cpp
src/CurvesDialog.cpp
src/CustomActionDialog.cpp
src/DataPickerTool.cpp
src/DataSetDialog.cpp
src/Differentiation.cpp
src/DockedWindow.cpp
src/ErrDialog.cpp
src/ExpDecayDialog.cpp
src/ExponentialFit.cpp
src/ExportDialog.cpp
src/FFT.cpp
src/FFTDialog.cpp
src/FFTFilter.cpp
src/Filter.cpp
src/FilterDialog.cpp
src/FindDialog.cpp
src/Fit.cpp
src/FitDialog.cpp
src/fit_gsl.cpp
src/FitModelHandler.cpp
src/FloatingWindow.cpp
src/Folder.cpp
src/FunctionCurve.cpp
src/FunctionDialog.cpp
src/globals.cpp
src/Graph3D.cpp
src/Graph.cpp
src/Grid.cpp
src/GridDetails.cpp
src/ImageDialog.cpp
src/ImageExportDialog.cpp
src/ImageMarker.cpp
src/ImportASCIIDialog.cpp
src/importOPJ.cpp
src/IntDialog.cpp
src/Integration.cpp
src/Interpolation.cpp
src/InterpolationDialog.cpp
src/LabelTool.cpp
src/LayerDialog.cpp
src/LegendWidget.cpp
src/LineDialog.cpp
src/LineProfileTool.cpp
src/LogisticFit.cpp
src/MatrixCommand.cpp
src/Matrix.cpp
src/MatrixDialog.cpp
src/MatrixModel.cpp
src/MatrixSizeDialog.cpp
src/MatrixValuesDialog.cpp
src/MdiSubWindow.cpp
src/MultiLayer.cpp
src/MultiPeakFit.cpp
src/MultiPeakFitTool.cpp
src/muParserScript.cpp
src/muParserScripting.cpp
src/MyParser.cpp
src/NonLinearFit.cpp
src/Note.cpp
src/nrutil.cpp
src/OpenProjectDialog.cpp
src/Plot3DDialog.cpp
src/Plot.cpp
src/PlotCurve.cpp
src/PlotDialog.cpp
src/PlotWizard.cpp
src/PluginFit.cpp
src/PolynomFitDialog.cpp
src/PolynomialFit.cpp
src/ProjectSaveView.cpp
src/ProjectSerialiser.cpp
src/PythonScript.cpp
src/PythonScripting.cpp
src/QwtBarCurve.cpp
src/QwtErrorPlotCurve.cpp
src/QwtHistogram.cpp
src/QwtPieCurve.cpp
src/RangeSelectorTool.cpp
src/RenameWindowDialog.cpp
src/ScaleDetails.cpp
src/ScaleDraw.cpp
src/ScalePicker.cpp
src/ScreenPickerTool.cpp
src/Script.cpp
src/ScriptCode.cpp
src/Scripted.cpp
src/ScriptingEnv.cpp
src/ScriptingLangDialog.cpp
src/ScriptingWindow.cpp
src/ScriptFileInterpreter.cpp
src/MultiTabScriptInterpreter.cpp
src/ScriptOutputDisplay.cpp
src/SelectionMoveResizer.cpp
src/SendToProgramDialog.cpp
src/SetColValuesDialog.cpp
src/SigmoidalFit.cpp
src/SmoothCurveDialog.cpp
src/SmoothFilter.cpp
src/SortDialog.cpp
src/Spectrogram.cpp
src/SurfaceDialog.cpp
src/Table.cpp
src/TableDialog.cpp
src/TableStatistics.cpp
src/TextDialog.cpp
src/TextEditor.cpp
src/TextFileIO.cpp
src/TiledWindow.cpp
src/TitlePicker.cpp
src/TranslateCurveTool.cpp
src/UserFunction.cpp
src/VectorCurve.cpp
src/WindowFactory.cpp
src/origin/OPJFile.cpp
src/plot2D/ImageSymbol.cpp
src/analysis/fft2D.cpp
src/lib/src/CollapsiveGroupBox.cpp
src/lib/src/ColorBox.cpp
src/lib/src/ColorButton.cpp
src/lib/src/ColorMapEditor.cpp
src/lib/src/ExtensibleFileDialog.cpp
src/lib/src/LineNumberDisplay.cpp
src/lib/src/PatternBox.cpp
src/lib/src/PenStyleBox.cpp
src/lib/src/SymbolBox.cpp
src/lib/src/SymbolDialog.cpp
src/lib/src/TextFormatButtons.cpp
src/lib/3rdparty/qtcolorpicker/src/qtcolorpicker.cpp
)
set ( QTIPLOT_C_SRC src/zlib123/minigzip.c )
# Suppress compiler warning on file that isn't ours
if ( CMAKE_COMPILER_IS_GNUCXX )
set_source_files_properties ( src/lib/3rdparty/qtcolorpicker/src/qtcolorpicker.cpp
PROPERTIES COMPILE_FLAGS -Wno-cast-qual )
endif ()
set ( MANTID_SRCS src/Mantid/AlgorithmDockWidget.cpp
src/Mantid/AlgorithmMonitor.cpp
src/Mantid/AlgorithmHistoryWindow.cpp
src/Mantid/ErrorBarSettings.cpp
src/Mantid/FirstTimeSetup.cpp
src/Mantid/FitParameterTie.cpp
src/Mantid/IFunctionWrapper.cpp
src/Mantid/ImportWorkspaceDlg.cpp
src/Mantid/InputHistory.cpp
src/Mantid/LabelToolLogValuesDialog.cpp
src/Mantid/ManageCustomMenus.cpp
src/Mantid/ManageInterfaceCategories.cpp
src/Mantid/MantidAbout.cpp
src/Mantid/MantidApplication.cpp
src/Mantid/MantidCurve.cpp
src/Mantid/MantidMatrix.cpp
src/Mantid/MantidMatrixCurve.cpp
src/Mantid/MantidMatrixDxExtensionHandler.cpp
src/Mantid/MantidMatrixExtensionRequest.cpp
src/Mantid/MantidMatrixFunction.cpp
src/Mantid/MantidMatrixModel.cpp
src/Mantid/MantidMDCurve.cpp
src/Mantid/MantidMDCurveDialog.cpp
src/Mantid/MantidMatrixDialog.cpp
src/Mantid/MantidPlotUtilities.cpp
src/Mantid/MantidSampleLogDialog.cpp
src/Mantid/MantidSampleMaterialDialog.cpp
src/Mantid/MantidSurfaceContourPlotGenerator.cpp
src/Mantid/MantidUI.cpp
src/Mantid/MantidTable.cpp
src/Mantid/PeakPickerTool.cpp
src/Mantid/Preferences.cpp
src/Mantid/RemoveErrorsDialog.cpp
src/Mantid/SampleLogDialogBase.cpp
src/Mantid/UserFitFunctionDialog.cpp
src/Mantid/InstrumentWidget/InstrumentWindow.cpp
)
###########################################################################
# Add the headers (so they show up in Visual Studio solutions)
###########################################################################
set ( QTIPLOT_HDRS src/ApplicationWindow.h
src/ArrowMarker.h
src/AssociationsDialog.h
src/AxesDialog.h
src/AxisDetails.h
src/Bar.h
src/BoxCurve.h
src/CanvasPicker.h
src/ColorMapDialog.h
src/Cone3D.h
src/ConfigDialog.h
src/ContourLinesEditor.h
src/Convolution.h
src/Correlation.h
src/cursors.h
src/CurveRangeDialog.h
src/CurvesDialog.h
src/CustomActionDialog.h
src/customevents.h
src/DataPickerTool.h
src/DataSetDialog.h
src/Differentiation.h
src/DockedWindow.h
src/ErrDialog.h
src/ExpDecayDialog.h
src/ExponentialFit.h
src/ExportDialog.h
src/FFTDialog.h
src/FFTFilter.h
src/FFT.h
src/FilterDialog.h
src/Filter.h
src/FindDialog.h
src/FitDialog.h
src/fit_gsl.h
src/Fit.h
src/FitModelHandler.h
src/FloatingWindow.h
src/Folder.h
src/FunctionCurve.h
src/FunctionDialog.h
src/globals.h
src/Graph3D.h
src/Graph.h
src/Grid.h
src/GridDetails.h
src/ImageDialog.h
src/ImageExportDialog.h
src/ImageMarker.h
src/ImportASCIIDialog.h
src/importOPJ.h
src/IntDialog.h
src/Integration.h
src/InterpolationDialog.h
src/Interpolation.h
src/LabelTool.h
src/LayerDialog.h
src/LegendWidget.h
src/LineDialog.h
src/LineProfileTool.h
src/LogisticFit.h
src/MatrixCommand.h
src/MatrixDialog.h
src/Matrix.h
src/MatrixModel.h
src/MatrixSizeDialog.h
src/MatrixValuesDialog.h
src/MdiSubWindow.h
src/MultiLayer.h
src/MultiPeakFit.h
src/MultiPeakFitTool.h
src/muParserScript.h
src/muParserScripting.h
src/MyParser.h
src/NonLinearFit.h
src/Note.h
src/nrutil.h
src/OpenProjectDialog.h
src/Plot3DDialog.h
src/PlotCurve.h
src/PlotDialog.h
src/Plot.h
src/PlotToolInterface.h
src/PlotWizard.h
src/PluginFit.h
src/PolynomFitDialog.h
src/PolynomialFit.h
src/ProjectSerialiser.h
src/ProjectSaveView.h
src/PythonScript.h
src/PythonScripting.h
src/QwtBarCurve.h
src/QwtErrorPlotCurve.h
src/QwtHistogram.h
src/QwtPieCurve.h
src/RangeSelectorTool.h
src/RenameWindowDialog.h
src/resource.h
src/ScaleDetails.h
src/ScaleDraw.h
src/ScalePicker.h
src/ScreenPickerTool.h
src/Scripted.h
src/Script.h
src/ScriptCode.h
src/ScriptingEnv.h
src/ScriptingLangDialog.h
src/ScriptingWindow.h
src/MultiTabScriptInterpreter.h
src/ScriptOutputDisplay.h
src/ScriptFileInterpreter.h
src/SelectionMoveResizer.h
src/SendToProgramDialog.h
src/SetColValuesDialog.h
src/SigmoidalFit.h
src/SmoothCurveDialog.h
src/SmoothFilter.h
src/SortDialog.h
src/Spectrogram.h
src/SurfaceDialog.h
src/TableDialog.h
src/Table.h
src/TableStatistics.h
src/TextDialog.h
src/TextEditor.h
src/TextFileIO.h
src/TiledWindow.h
src/TitlePicker.h
src/TranslateCurveTool.h
src/UserFunction.h
src/VectorCurve.h
src/WindowFactory.h
src/analysis/fft2D.h
src/origin/OPJFile.h
src/plot2D/ImageSymbol.h
src/lib/include/CollapsiveGroupBox.h
src/lib/include/ColorBox.h
src/lib/include/ColorButton.h
src/lib/include/ColorMapEditor.h
src/lib/include/ExtensibleFileDialog.h
src/lib/include/LineNumberDisplay.h
src/lib/include/PatternBox.h
src/lib/include/PenStyleBox.h
src/lib/include/SymbolBox.h
src/lib/include/SymbolDialog.h
src/lib/include/TextFormatButtons.h
src/lib/3rdparty/qtcolorpicker/src/qtcolorpicker.h
)
set ( MANTID_HDRS src/Mantid/AlgorithmMonitor.h
src/Mantid/AlgorithmHistoryWindow.h
src/Mantid/ErrorBarSettings.h
src/Mantid/FirstTimeSetup.h
src/Mantid/FitParameterTie.h
src/Mantid/IFunctionWrapper.h
src/Mantid/ImportWorkspaceDlg.h
src/Mantid/IMantidMatrixExtensionHandler.h
src/Mantid/InputHistory.h
src/Mantid/LabelToolLogValuesDialog.h
src/Mantid/ManageCustomMenus.h
src/Mantid/ManageInterfaceCategories.h
src/Mantid/MantidAbout.h
src/Mantid/MantidApplication.h
src/Mantid/MantidCurve.h
src/Mantid/MantidMatrixCurve.h
src/Mantid/MantidMatrixDxExtensionHandler.h
src/Mantid/MantidMatrixExtensionRequest.h
src/Mantid/MantidMatrixModel.h
src/Mantid/MantidMatrixNullExtensionHandler.h
src/Mantid/MantidMatrixTabExtension.h
src/Mantid/MantidMDCurve.h
src/Mantid/MantidMDCurveDialog.h
src/Mantid/MantidMatrixDialog.h
src/Mantid/MantidMatrix.h
src/Mantid/MantidMatrixFunction.h
src/Mantid/MantidPlotUtilities.h
src/Mantid/MantidSampleLogDialog.h
src/Mantid/MantidSampleMaterialDialog.h
src/Mantid/MantidSurfaceContourPlotGenerator.h
src/Mantid/MantidUI.h
src/Mantid/MantidTable.h
src/Mantid/PeakPickerTool.h
src/Mantid/Preferences.h
src/Mantid/RemoveErrorsDialog.h
src/Mantid/SampleLogDialogBase.h
src/Mantid/UserFitFunctionDialog.h
src/Mantid/InstrumentWidget/InstrumentWindow.h
)
###########################################################################
# Add Qt to the include path
###########################################################################
include ( UseQt4 )
###########################################################################
# Do the sip generation.
###########################################################################
include_directories ( ${PYTHON_INCLUDE_PATH} )
set ( SIP_SPEC ${CMAKE_CURRENT_SOURCE_DIR}/src/qti.sip )
set ( SIP_SRC_IN ${CMAKE_CURRENT_SOURCE_DIR}/src/sipqti.cpp.in )
set ( SIP_SRC ${CMAKE_CURRENT_BINARY_DIR}/sipqti.cpp )
set ( SIP_SRC_AUTO sip_qtipart0.cpp )
# We need to manually add all the headers that are in qti.sip
# so that the dependencies are known to CMake
set ( SIP_HDRS src/MdiSubWindow.h
src/Table.h
src/Matrix.h
src/ArrowMarker.h
src/ImageMarker.h
src/LegendWidget.h
src/Grid.h
src/Graph.h
src/MultiLayer.h
src/Note.h
src/Graph3D.h
src/ApplicationWindow.h
src/Spectrogram.h
src/PythonScripting.h
src/PythonScript.h
src/Folder.h
src/plot2D/ImageSymbol.h
src/Mantid/ErrorBarSettings.h
src/Mantid/MantidUI.h
src/Mantid/MantidMatrix.h
)
set( SRC_UNITY_IGNORE_FILES )
###########################################################################
# Sip generated files
###########################################################################
# The code generated by sip causes compiler warnings therefore the
# generated file is wrapped by ${SIP_SRC} and these warnings are
# disabled. In order for VS2010 to to this correctly the second
# custom command below is required along with the committed
# src/sipqti.cpp.rule file.
set ( MANTIDQTPYTHON_SIP_DIR ${CMAKE_CURRENT_SOURCE_DIR}/../qt/python/mantidqtpython)
add_custom_command ( OUTPUT ${SIP_SRC_AUTO}
COMMAND ${SIP_EXECUTABLE}
-I ${PYQT4_SIP_DIR} -I ${MANTIDQTPYTHON_SIP_DIR} ${PYQT4_SIP_FLAGS}
-c ${CMAKE_CURRENT_BINARY_DIR} -j1 -w -o
${SIP_SPEC}
DEPENDS src/qti.sip ${SIP_HDRS}
COMMENT "Generating python bindings using sip"
)
add_custom_command ( OUTPUT ${SIP_SRC}
COMMAND ${CMAKE_COMMAND} ARGS -E copy_if_different ${SIP_SRC_IN} ${SIP_SRC}
DEPENDS ${SIP_SRC_AUTO}
COMMENT ""
)
# Needed for sip.h header that can end up in a different place to to the main Python include directory
include_directories ( SYSTEM ${SIP_INCLUDE_DIR} )
# Needed for sip generated files to find includes in src
include_directories ( ${CMAKE_CURRENT_SOURCE_DIR} )
###########################################################################
# Specify the files that we need to pass to Qt macros
###########################################################################
set ( QTIPLOT_MOC_FILES src/ApplicationWindow.h
src/AssociationsDialog.h
src/AxesDialog.h
src/AxisDetails.h
src/CanvasPicker.h
src/ColorMapDialog.h
src/ConfigDialog.h
src/ContourLinesEditor.h
src/Convolution.h
src/Correlation.h
src/CurveRangeDialog.h
src/CurvesDialog.h
src/CustomActionDialog.h
src/DataPickerTool.h
src/DataSetDialog.h
src/Differentiation.h
src/DockedWindow.h
src/ErrDialog.h
src/ExpDecayDialog.h
src/ExponentialFit.h
src/ExportDialog.h
src/FFTDialog.h
src/FFTFilter.h
src/FFT.h
src/FilterDialog.h
src/Filter.h
src/FindDialog.h
src/FitDialog.h
src/Fit.h
src/FloatingWindow.h
src/Folder.h
src/FunctionDialog.h
src/Graph3D.h
src/Graph.h
src/Grid.h
src/GridDetails.h
src/ImageDialog.h
src/ImageExportDialog.h
src/ImportASCIIDialog.h
src/IntDialog.h
src/Integration.h
src/InterpolationDialog.h
src/Interpolation.h
src/LabelTool.h
src/LayerDialog.h
src/LegendWidget.h
src/LineDialog.h
src/LineProfileTool.h
src/LogisticFit.h
src/MatrixDialog.h
src/Matrix.h
src/MatrixModel.h
src/MatrixSizeDialog.h
src/MatrixValuesDialog.h
src/MdiSubWindow.h
src/MultiLayer.h
src/MultiPeakFit.h
src/MultiPeakFitTool.h
src/muParserScript.h
src/muParserScripting.h
src/NonLinearFit.h
src/Note.h
src/OpenProjectDialog.h
src/Plot3DDialog.h
src/PlotCurve.h
src/PlotDialog.h
src/Plot.h
src/PlotWizard.h
src/PluginFit.h
src/PolynomFitDialog.h
src/PolynomialFit.h
src/ProjectSaveView.h
src/ProjectSerialiser.h
src/PythonScript.h
src/PythonScripting.h
src/QwtPieCurve.h
src/RangeSelectorTool.h
src/RenameWindowDialog.h
src/ScaleDetails.h
src/ScalePicker.h
src/ScreenPickerTool.h
src/Script.h
src/ScriptingEnv.h
src/ScriptingLangDialog.h
src/ScriptingWindow.h
src/MultiTabScriptInterpreter.h
src/ScriptOutputDisplay.h
src/ScriptFileInterpreter.h
src/SelectionMoveResizer.h
src/SendToProgramDialog.h
src/SetColValuesDialog.h
src/SigmoidalFit.h
src/SmoothCurveDialog.h
src/SmoothFilter.h
src/Spectrogram.h
src/SortDialog.h
src/SurfaceDialog.h
src/TableDialog.h
src/Table.h
src/TableStatistics.h
src/TextDialog.h
src/TextEditor.h
src/TiledWindow.h
src/TitlePicker.h
src/TranslateCurveTool.h
src/lib/include/CollapsiveGroupBox.h
src/lib/include/ColorBox.h
src/lib/include/ColorButton.h
src/lib/include/ColorMapEditor.h
src/lib/include/ExtensibleFileDialog.h
src/lib/include/LineNumberDisplay.h
src/lib/include/PatternBox.h
src/lib/include/PenStyleBox.h
src/lib/include/SymbolBox.h
src/lib/include/SymbolDialog.h
src/lib/include/TextFormatButtons.h
src/lib/3rdparty/qtcolorpicker/src/qtcolorpicker.h
)
set ( MANTID_MOC_FILES src/Mantid/AlgorithmDockWidget.h
src/Mantid/AlgorithmMonitor.h
src/Mantid/AlgorithmHistoryWindow.h
src/Mantid/ErrorBarSettings.h
src/Mantid/FirstTimeSetup.h
src/Mantid/IFunctionWrapper.h
src/Mantid/ImportWorkspaceDlg.h
src/Mantid/LabelToolLogValuesDialog.h
src/Mantid/ManageCustomMenus.h
src/Mantid/ManageInterfaceCategories.h
src/Mantid/MantidAbout.h
src/Mantid/MantidApplication.h
src/Mantid/MantidCurve.h
src/Mantid/MantidMatrixCurve.h
src/Mantid/MantidMDCurve.h
src/Mantid/MantidMDCurveDialog.h
src/Mantid/MantidMatrixDialog.h
src/Mantid/MantidMatrix.h
src/Mantid/MantidMatrixFunction.h
src/Mantid/MantidMatrixModel.h
src/Mantid/MantidSampleLogDialog.h
src/Mantid/MantidSampleMaterialDialog.h
src/Mantid/MantidUI.h
src/Mantid/MantidTable.h
src/Mantid/PeakPickerTool.h
src/Mantid/RemoveErrorsDialog.h
src/Mantid/SampleLogDialogBase.h
src/Mantid/UserFitFunctionDialog.h
src/Mantid/InstrumentWidget/InstrumentWindow.h
)
set ( UI_FILES src/SendToProgramDialog.ui
src/ProjectSave.ui
src/Mantid/FirstTimeSetup.ui
src/Mantid/UserFitFunctionDialog.ui
src/Mantid/MantidAbout.ui
src/Mantid/RemoveErrorsDialog.ui
src/Mantid/ManageCustomMenus.ui
src/Mantid/ManageInterfaceCategories.ui
src/Mantid/MantidMDCurveDialog.ui
src/Mantid/MantidSampleMaterialDialog.ui
)
qt4_wrap_cpp ( MOCCED_FILES ${QTIPLOT_MOC_FILES} ${MANTID_MOC_FILES} )
# Call separate function on third-party code that expects moc output to have certain name
qt4_generate_moc ( src/lib/3rdparty/qtcolorpicker/src/qtcolorpicker.cpp
${CMAKE_CURRENT_BINARY_DIR}/qtcolorpicker.moc )
set_source_files_properties ( ${CMAKE_CURRENT_BINARY_DIR}/qtcolorpicker.moc
PROPERTIES HEADER_FILE_ONLY true )
set ( MOCCED_FILES ${MOCCED_FILES} ${CMAKE_CURRENT_BINARY_DIR}/qtcolorpicker.moc )
set ( SRC_FILES ${QTIPLOT_SRCS} ${MANTID_SRCS} ${SIP_SRC} )
set ( INC_FILES ${QTIPLOT_HDRS} ${MANTID_HDRS} )
if ( WIN32 )
set ( MANIFEST_FILES MantidPlot.manifest )
endif ()
set ( ALL_SRC ${SRC_FILES} ${MOCCED_FILES} ${MANIFEST_FILES} )
# Use a precompiled header where they are supported
enable_precompiled_headers( src/PrecompiledHeader.h ALL_SRC )
qt4_wrap_ui ( UI_HDRS ${UI_FILES} )
# The generated ui headers will go here:
include_directories ( ${CMAKE_CURRENT_BINARY_DIR} )
###########################################################################
# Internal icon links
###########################################################################
qt4_add_resources ( RES_FILES ${PROJECT_SOURCE_DIR}/images/images.qrc )
qt4_add_resources ( RES_FILES ${PROJECT_SOURCE_DIR}/images/MantidWidgets.qrc )
qt4_add_resources ( RES_FILES ${PROJECT_SOURCE_DIR}/images//fonts/fonts.qrc )
qt4_add_resources ( RES_FILES ${CMAKE_CURRENT_SOURCE_DIR}/icons/icons.qrc )
###########################################################################
# Add the dependencies
###########################################################################
if(MAKE_VATES)
include( ${PARAVIEW_USE_FILE} )
endif()
include_directories ( SYSTEM ${MUPARSER_INCLUDE_DIR} )
include_directories ( ${ZLIB_INCLUDE_DIRS} )
include_directories ( SYSTEM ${QWT_INCLUDE_DIR} )
find_package ( QwtPlot3d REQUIRED )
include_directories ( SYSTEM ${QWTPLOT3D_INCLUDE_DIR} )
find_package ( QScintilla REQUIRED )
include_directories ( ${QSCINTILLA_INCLUDE_DIR} )
###########################################################################
# Now create the target and add its dependencies and flags
###########################################################################
add_definitions ( -DSCRIPTING_MUPARSER )
add_definitions ( -DSCRIPTING_PYTHON )
add_definitions ( -DQSCINTILLA_DLL ) # Will only have an effect on Windows (as is desired)
include_directories ( src )
include_directories ( src/lib/include )
include_directories ( src/lib/3rdparty/qtcolorpicker/src )
include_directories ( ../qt/widgets/common/inc )
include_directories ( ../qt/widgets/instrumentview/inc )
include_directories ( ../qt/widgets/sliceviewer/inc )
include_directories ( ../qt/widgets/spectrumviewer/inc )
include_directories ( ../qt/widgets/factory/inc )
# ui_ files end up in these places
include_directories ( ${CMAKE_BINARY_DIR}/qt/widgets/common )
include_directories ( ${CMAKE_BINARY_DIR}/qt/widgets/sliceviewer )
###########################################################################
# Application icon files
###########################################################################
if( WIN32 )
set ( MANTID_RC_FILE icons/MantidPlotDesktop.rc )
if ( CONSOLE )
set ( WIN_CONSOLE )
else ()
set( WIN_CONSOLE WIN32 )
endif( CONSOLE )
endif( WIN32 )
if ( APPLE )
set ( MANTID_RC_FILE ${CMAKE_SOURCE_DIR}/images/MantidPlot.icns )
set_source_files_properties(MANTID_RC_FILE PROPERTIES MACOSX_PACKAGE_LOCATION Resources)
endif ()
###########################################################################
# Config reset scripts
###########################################################################
if ( WIN32 )
set ( CONFIG_RESET_SCRIPT mantid_reset_settings.bat )
else ()
set ( CONFIG_RESET_SCRIPT mantid_reset_settings.sh )
endif ()
copy_files_to_dir ( "${CONFIG_RESET_SCRIPT}"
${CMAKE_CURRENT_SOURCE_DIR}
${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_CFG_INTDIR}
CONFIG_RESET_SCRIPT_FILE )
###########################################################################
# Required Python config files
###########################################################################
# Top-level python scripts
set( PY_FILES mantidplot.py mantidplotrc.py mantid_qt_settings_editor.py)
copy_files_to_dir ( "${PY_FILES}"
${CMAKE_CURRENT_SOURCE_DIR}
${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_CFG_INTDIR}
PYTHON_INSTALL_FILES )
# mantidplot package
set( MTDPLOTPY_FILES
__init__.py
proxies.py
pyplot.py
qtiplot.py
)
copy_files_to_dir ( "${MTDPLOTPY_FILES}"
${CMAKE_CURRENT_SOURCE_DIR}/pymantidplot
${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_CFG_INTDIR}/pymantidplot
MTDPLOT_INSTALL_FILES )
set( MTDPLOTPYMPL_FILES
__init__.py
backend_mtdqt4agg.py
)
copy_files_to_dir ( "${MTDPLOTPYMPL_FILES}"
${CMAKE_CURRENT_SOURCE_DIR}/pymantidplot/mpl
${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_CFG_INTDIR}/pymantidplot/mpl
MTDPLOTMPL_INSTALL_FILES )
# IPython scripts
set( IPY_FILES
__init__.py
mantid_ipython_widget.py
)
copy_files_to_dir ( "${IPY_FILES}"
${CMAKE_CURRENT_SOURCE_DIR}/ipython_widget
${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${CMAKE_CFG_INTDIR}/ipython_widget
IPYTHON_INSTALL_FILES )
###########################################################################
# MantidPlot executable
###########################################################################
add_executable ( MantidPlot ${WIN_CONSOLE} MACOSX_BUNDLE ${ALL_SRC} src/main.cpp
${INC_FILES} ${QTIPLOT_C_SRC} ${UI_HDRS}
${RES_FILES} ${MANTID_RC_FILE}
${PYTHON_INSTALL_FILES} ${MTDPLOT_INSTALL_FILES} ${MTDPLOTMPL_INSTALL_FILES}
${CONFIG_RESET_SCRIPT_FILE} ${IPYTHON_INSTALL_FILES}
)
# Library dependencies
target_link_libraries ( MantidPlot LINK_PRIVATE ${TCMALLOC_LIBRARIES_LINKTIME}
${CORE_MANTIDLIBS}
MantidQtWidgetsCommon
MantidQtWidgetsInstrumentView
MantidQtWidgetsSliceViewer
MantidQtWidgetsFactoryQt4
MantidQtWidgetsSpectrumViewer
${Boost_LIBRARIES}
${POCO_LIBRARIES}
${GSL_LIBRARIES}
${MUPARSER_LIBRARIES}
${QT_LIBRARIES}
${QWT_LIBRARIES}
${QWTPLOT3D_LIBRARIES}
${QSCINTILLA_LIBRARIES}
${PYTHON_LIBRARIES}
${ZLIB_LIBRARIES}
${OPENGL_LIBRARIES}
)
if(MAKE_VATES)
target_include_directories( MantidPlot SYSTEM PRIVATE ${PARAVIEW_INCLUDE_DIRS} )
target_link_libraries ( MantidPlot LINK_PRIVATE vtkPVClientServerCoreRendering )
endif()
if (WITH_ASAN)
target_link_libraries ( MantidPlot LINK_PRIVATE -lasan )
endif ()
# Plugin dependencies
add_dependencies( MantidPlot mantidqtpython CompilePyUI )
if (OSX_VERSION VERSION_GREATER 10.8)
set_target_properties(MantidPlot PROPERTIES INSTALL_RPATH "@executable_path;@executable_path/../Libraries")
endif ()
###########################################################################
# Custom Info.plist file for OS X
###########################################################################
if( APPLE )
# Setting the CFBundleIdentifer attribute on OS X 10.6 (SL) and before
# causes problems with trying to install the package on the same
# machine as it was built. It tries to relocate the package to the build directory
# because the bundle identifiers match. Mountain Lion requires the attribute
# to avoid crashes when accessing certain system dialogs from Qt.
# The ideal would be to pass the --no-relocate
# option to packagemaker but we can't control that so only set the
# identifier for 10.7 and above
#
# This can disappear when if/when we move to a drag-n-drop package.
if (OSX_VERSION VERSION_GREATER 10.7 OR OSX_VERSION VERSION_EQUAL 10.7)
set ( MAC_BUNDLE_IDENTIFIER "org.mantidproject.MantidPlot" )
else()
set ( MAC_BUNDLE_IDENTIFIER "" )
endif()
configure_file ( ${CMAKE_CURRENT_SOURCE_DIR}/../installers/MacInstaller/Info.plist.in
${CMAKE_CURRENT_BINARY_DIR}/Info.plist
@ONLY )
set_target_properties( MantidPlot PROPERTIES MACOSX_BUNDLE_INFO_PLIST
${CMAKE_CURRENT_BINARY_DIR}/Info.plist )
endif()
###########################################################################
# Entry point flag for Windows to ensure we always link to standard main
###########################################################################
if( WIN32 )
set_target_properties( MantidPlot PROPERTIES LINK_FLAGS "/ENTRY:mainCRTStartup" )
if ( CONSOLE )
set_target_properties( MantidPlot PROPERTIES COMPILE_DEFINITIONS "_CONSOLE" )
endif ( CONSOLE )
endif( WIN32 )
###########################################################################
# MantidPlot Python Unit Tests
###########################################################################
# List of .py files than must be run WITHIN MantidPlot.
set ( MANTIDPLOT_TEST_PY_FILES
MantidPlotAlgorithmDialogTest.py
MantidPlotInstrumentViewTest.py
MantidPlotSliceViewerTest.py
MantidPlot1DPlotTest.py
MantidPlot2DPlotTest.py
MantidPlotMatplotlibTest.py
MantidPlotProjectSerialiseTest.py
MantidPlotProxiesTest.py
MantidPlotPythonImportTest.py
MantidPlotFoldersTest.py
MantidPlotMdiSubWindowTest.py
MantidPlotTiledWindowTest.py
MantidPlotInputArgsCheck.py
MantidPlotPyplotGeneralTest.py
)
if ( MAKE_VATES )
list ( APPEND MANTIDPLOT_TEST_PY_FILES MantidPlotPVPythonTest.py )
endif ()
if ( 0 )
message (STATUS "Your CMAKE_SYSTEM string is '${CMAKE_SYSTEM}'")
message (STATUS "Your CMAKE_SYSTEM_NAME string is '${CMAKE_SYSTEM_NAME}'")
message (STATUS "Your CMAKE_BINARY_DIR string is '${CMAKE_BINARY_DIR}'")
message (STATUS "Your BIN_DIR string is '${BIN_DIR}'")
message (STATUS "Your CMAKE_LIBRARY_OUTPUT_DIRECTORY string is '${CMAKE_LIBRARY_OUTPUT_DIRECTORY}'")
message (STATUS "Your CMAKE_CFG_INTDIR string is '${CMAKE_CFG_INTDIR}'")
message (STATUS "Your CMAKE_CURRENT_BINARY_DIR string is '${CMAKE_CURRENT_BINARY_DIR}'")
endif ()
# Check system version
if ( ${CMAKE_SYSTEM} MATCHES ".*\\.el5" )
# This is RHEL5. GUI tests hang on this platform for some reason
message ( "RHEL5 hangs on GUI tests. Disabling MantidPlot python tests." )
else ()
# Find the path to the built MantidPlot app. Need different paths for MAC for some reason.
set (MANTIDPLOT_PATH "${CMAKE_BINARY_DIR}/${BIN_DIR}/MantidPlot" )
# Screenshots destination
if ("$ENV{WORKSPACE}" STREQUAL "")
set (SCREENSHOTS_DIR "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/screenshots" )
else ()
set (SCREENSHOTS_DIR "$ENV{WORKSPACE}/screenshots" )
endif ()
# Add an environment property MANTID_SOURCE so that the script can find the source of xmlrunner
set (TEST_ENVIRONMENT "MANTID_SOURCE=${CMAKE_SOURCE_DIR};PYTHONPATH=${PYTHON_XMLRUNNER_DIR};MANTID_SCREENSHOT_REPORT=${SCREENSHOTS_DIR}" )
# Fixes for Darwin (MacOS)
if ( ${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
set (MANTIDPLOT_PATH "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${BIN_DIR}/MantidPlot" )
# Append to the path and set MANTIDPATH for MacOS' MantidPlot to run
set (TEST_ENVIRONMENT "PATH=$ENV{PATH}:${CMAKE_LIBRARY_OUTPUT_DIRECTORY};MANTIDPATH=${CMAKE_LIBRARY_OUTPUT_DIRECTORY};MANTID_SOURCE=${CMAKE_SOURCE_DIR};PYTHONPATH=${PYTHON_XMLRUNNER_DIR};MANTID_SCREENSHOT_REPORT=${SCREENSHOTS_DIR}" )
endif ()
# Make a ctest target for each file
foreach ( PYFILE ${MANTIDPLOT_TEST_PY_FILES} )
# Add the test. Name of test = name of the file
add_test ( ${PYFILE} ${MANTIDPLOT_PATH} -xq ${CMAKE_CURRENT_SOURCE_DIR}/test/${PYFILE} )
# Set the previously-built environment
set_tests_properties ( ${PYFILE} PROPERTIES
RUN_SERIAL 1
ENVIRONMENT "${TEST_ENVIRONMENT}"
TIMEOUT ${TESTING_TIMEOUT} )
endforeach ()
add_dependencies( GUITests MantidPlot )
endif()
###########################################################################
# Installation settings
###########################################################################
install ( TARGETS MantidPlot RUNTIME DESTINATION ${BIN_DIR}
BUNDLE DESTINATION .
)
# Ship required files. Explicit so some can be disabled easily if necessary
install ( FILES ${PY_FILES} DESTINATION ${BIN_DIR} )
foreach(PY_FILE ${MTDPLOTPY_FILES} )
install ( FILES pymantidplot/${PY_FILE} DESTINATION ${BIN_DIR}/pymantidplot )
endforeach()
foreach(PY_FILE ${MTDPLOTPYMPL_FILES} )
install ( FILES pymantidplot/mpl/${PY_FILE} DESTINATION ${BIN_DIR}/pymantidplot/mpl )
endforeach()
foreach(PY_FILE ${IPY_FILES} )
install ( FILES ipython_widget/${PY_FILE} DESTINATION ${BIN_DIR}/ipython_widget )
endforeach()
install ( FILES ${CONFIG_RESET_SCRIPT} DESTINATION ${BIN_DIR} )
# file make_package.rb contains hard-coded path to the libraries
# this causes fail of the installation with macports
# therefore MACPORTS option is introduced
if ( APPLE )
if (OSX_VERSION VERSION_LESS 10.9)
configure_file ( ${CMAKE_CURRENT_SOURCE_DIR}/FixBundle.cmake.in
${CMAKE_CURRENT_BINARY_DIR}/FixBundle.cmake
@ONLY )
install ( SCRIPT ${CMAKE_CURRENT_BINARY_DIR}/FixBundle.cmake )
elseif (MACPORTS)
install ( FILES package_python_macports.py DESTINATION MantidPlot.app/ )
configure_file ( ${CMAKE_CURRENT_SOURCE_DIR}/FixMacportsBundle.cmake.in
${CMAKE_CURRENT_BINARY_DIR}/FixMacportsBundle.cmake
@ONLY )
install ( SCRIPT ${CMAKE_CURRENT_BINARY_DIR}/FixMacportsBundle.cmake )
else ()
configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/make_package.rb.in
${CMAKE_CURRENT_BINARY_DIR}/make_package.rb
@ONLY )
install ( FILES ${CMAKE_CURRENT_BINARY_DIR}/make_package.rb DESTINATION MantidPlot.app/ )
configure_file ( ${CMAKE_CURRENT_SOURCE_DIR}/FixMavericksBundle.cmake.in
${CMAKE_CURRENT_BINARY_DIR}/FixMavericksBundle.cmake
@ONLY )
install ( SCRIPT ${CMAKE_CURRENT_BINARY_DIR}/FixMavericksBundle.cmake )
endif ()
endif ()