diff --git a/Code/Mantid/instrument/HET_Parameters.xml b/Code/Mantid/instrument/HET_Parameters.xml new file mode 100644 index 0000000000000000000000000000000000000000..597f4afdc8a95ed2854850bf8e5a481316f7ebf6 --- /dev/null +++ b/Code/Mantid/instrument/HET_Parameters.xml @@ -0,0 +1,180 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<parameter-file instrument = "HET" date = "2010-05-05T00:00:00"> + +<component-link name = "HET"> + +<!-- Specify that the detector positions should be taken from the data file --> +<parameter name="det-pos-source" type="string"> + <value val="datafile"/> +</parameter> + +<parameter name="deltaE-mode" type="string"> + <value val="direct"/> +</parameter> + +<parameter name="ei-mon1-spec"> + <value val="2"/> +</parameter> + +<parameter name="ei-mon2-spec"> + <value val="3"/> +</parameter> + +<parameter name="scale-factor"> + <value val="1.7016e8"/> +</parameter> + +<parameter name="wb-scale-factor"> + <value val="1000"/> +</parameter> + +<parameter name="bkgd-range-min"> + <value val="12000"/> +</parameter> + +<parameter name="bkgd-range-max"> + <value val="18000"/> +</parameter> + +<parameter name="wb-integr-min"> + <value val="20"/> +</parameter> + +<parameter name="wb-integr-max"> + <value val="40"/> +</parameter> + +<parameter name="norm-mon1-spec"> + <value val="69633"/> +</parameter> + +<parameter name="norm-mon1-min"> + <value val="1000"/> +</parameter> + +<parameter name="norm-mon1-max"> + <value val="2000"/> +</parameter> + +<parameter name="monovan-integr-min"> + <value val="-1"/> +</parameter> + +<parameter name="monovan-integr-max"> + <value val="1"/> +</parameter> + +<parameter name="vanadium-mass"> + <value val="30.1"/> +</parameter> + +<parameter name="vanadium-rmm"> + <value val="50.9415"/> +</parameter> + +<!-- Diagnostic defaults --> + +<!-- Absolute lo threshold for vanadium diag (tiny) --> +<parameter name="diag_tiny"> + <value val="1e-10"/> +</parameter> + +<!-- Absolute hi threshold for vanadium diag (huge) --> +<parameter name="diag_huge"> + <value val="1e10"/> +</parameter> + +<!-- Remove zeroes in background (s_zero)--> +<parameter name="diag_samp_zero"> + <value val="0.0"/> +</parameter> + +<!-- Fraction of median to consider counting low for the white beam diag (sv_lo)--> +<parameter name="diag_samp_lo"> + <value val="0.0"/> +</parameter> + +<!-- Fraction of median to consider counting high for the white beam diag (sv_hi)--> +<parameter name="diag_samp_hi"> + <value val="1.5"/> +</parameter> + +<!-- Error criterion as a multiple of error bar for background (sv_sig) --> +<parameter name="diag_samp_sig"> + <value val="3.3"/> +</parameter> + +<!-- Lower bound defining outliers as fraction of median value (v_out_lo)--> +<parameter name="diag_van_out_lo"> + <value val="0.01"/> +</parameter> + +<!-- Upper bound defining outliers as fraction of median value (v_out_hi)--> +<parameter name="diag_van_out_hi"> + <value val="100."/> +</parameter> + +<!-- Fraction of median to consider counting low for the white beam diag (vv_lo)--> +<parameter name="diag_van_lo"> + <value val="0.1"/> +</parameter> + +<!-- Fraction of median to consider counting high for the white beam diag (vv_hi)--> +<parameter name="diag_van_hi"> + <value val="2.0"/> +</parameter> + +<!-- Error criterion as a multiple of error bar for background (vv_sig) --> +<parameter name="diag_van_sig"> + <value val="0.0"/> +</parameter> + +<!-- True if background is to be checked --> +<parameter name="check_background"> + <value val="1.0"/> +</parameter> + +<!-- True if the bleed tests should be run --> +<parameter name="diag_bleed_test"> + <value val="1.0"/> +</parameter> + +<!-- The maximum framerate to allow in a tube --> +<parameter name="diag_bleed_maxrate"> + <value val="0.01"/> +</parameter> + +<!-- The number of pixels to ignore around the centre of the tube --> +<parameter name="diag_bleed_pixels"> + <value val="80"/> +</parameter> + +<!-- Variation for ratio test with second white beam --> +<parameter name="diag_variation"> + <value val="1.1"/> +</parameter> + +<!-- --> +<!-- Absolute units conversion average --> + +<parameter name="monovan_lo_bound"> + <value val="0.01"/> +</parameter> + +<parameter name="monovan_hi_bound"> + <value val="100"/> +</parameter> + +<parameter name="monovan_lo_frac"> + <value val="0.8"/> +</parameter> + +<parameter name="monovan_hi_frac"> + <value val="1.2"/> +</parameter> + +<!-- --> + +</component-link> + +</parameter-file>