Batson Iii committed Nov 17, 2020 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 

XSProc Standard Composition Examples

Infinite homogeneous medium unit cell data

EXAMPLE 1. A single mixture 1.

Consider a single cylindrical configuration of mixture 1, composed of 10% enriched UO2 having a radius of 35 cm and a height of 20 cm. This fuel region is sufficient large to model as an infinite medium. Mixture 100 may be used in subsequent multigroup neutron transport calculations.

INFHOMMEDIUM  1  CELLMIX=10  END

XSDRNPM will calculate the eigenvalue of an infinite mass of 10% enriched UO2.

LATTICECELL unit cell data

Examples of “regular” LATTICECELL unit cells are given in Examples 1–5, and examples of “annular” LATTICECELL unit cells are given in Examples 6–10 below.

EXAMPLE 1. SQUAREPITCH (infinitely long cylindrical pins in a square-pitched array).

Consider a large array of UO2 fuel pins having a fuel O.D. of 0.79 cm, a 0.015-cm gap, and a 0.06-cm-thick aluminum clad. The array is a square-pitched array with a center-to-center spacing of 1.60 cm and is completely flooded with water. In the standard composition data, UO2 is defined to be mixture 1, the aluminum clad is defined to be mixture 2, and the water moderator is defined to be mixture 3.

LATTICECELL  SQUAREPITCH PITCH=1.60 3 FUELD=0.79 1 CLADD=0.94 2 GAPD=0.82 0 END

EXAMPLE 2. TRIANGPITCH (infinitely long cylinders in a triangular-pitched array).

Consider an array of UO2 pins with a diameter of 0.635 m. The outside diameter of the clad is 0.78 cm. There is no gap between the fuel and clad. The array is a triangular-pitched array with a center-to-center spacing of 5.0 cm and is flooded with water. In the standard composition data, the UO2 is defined to be mixture 1, the aluminum is defined to be mixture 2, and the water moderator is defined to be mixture 3.

LATTICECELL  TRIANGPITCH PITCH=5.0  3  FUELD=.635  1  CLAD=.78  2  END

EXAMPLE 3. SPHSQUAREP (spheres in a square-pitched array).

Consider a large array of U3O8 spheres having a fuel O.D. of 18.6 cm, with an aluminum clad that is 0.18 cm thick. The array is a triangular-pitched array with a center-to-center spacing of 19.0 cm and is unmoderated. In the standard composition data, the aluminum is defined to be mixture 1 and the U3O8 is defined to be mixture 2. There is no moderator material, so 0 will be used to represent a void. Also, have XSDRNPM make a cell weighted material 20 from this unit cell.

LATTICECELL SPHSQUAREP PITCH=19.0 0 FUELD=18.6 2 CLADD=18.96 1 CELLMIX=20 END

EXAMPLE 4. SPHTRIANGP (spheres in a triangular-pitched array).

Consider a large array of U3O8 spheres having a fuel O.D. of 18.6 cm, with an aluminum clad that is 0.18 cm thick. The array is a triangular-pitched array with a center-to-center spacing of 19.0 cm and is flooded with water. In the standard composition data, the aluminum is defined to be mixture 1, the U3O8 is defined to be mixture 2, and the water moderator is defined to be mixture 3.

LATTICECELL  SPHTRIANGP  PITCH=19.0  3  FUELD=18.6  2 CLADD=18.96  1  END

EXAMPLE 5. SYMMSLABCELL (slabs repeated in a symmetric fashion).

Consider a system of alternating slabs of U3O8 and low-density water. Each U3O8 region is 1.27 cm thick, and each water region is 15.0 cm thick. In the standard composition data, the U3O8 is defined to be mixture 1, and the low-density water is defined to be mixture 2.

LATTICECELL  SYMMSLABCELL PITCH=16.27  2 FUELD=1.27  1  END

EXAMPLE 5a. SYMMSLABCELL (slabs repeated in a symmetric fashion).

Consider a system of alternating slabs of U3O8 and low-density water. Each U3O8 region is 1.27 cm thick, and each water region is 15.0 cm thick. The U3O8 regions have a 0.01-cm gap and 0.24-cm-thick aluminum clad on each face. In the standard composition data, the U3O8 is defined to be mixture 1, the aluminum is defined to be mixture 2, and the low-density water is defined to be mixture 3. Also, have XSDRNPM make a cell-weighted material 100 from this unit cell.

LATTICECELL  SYMMSLABCELL  PITCH=16.77  3  FUELD=1.27  1 CLADD=1.77  2  GAPD=1.29  0  CELLMIX=100  END

EXAMPLE 6. ASQUAREPITCH (infinitely long annular cylindrical rods in a square-pitched array).

Consider an array of uranium metal pipes having an inside diameter of 5.0 cm and an outer diameter of 6.75 cm. A gap of 0.025 cm and a clad of 0.25 cm exist on both the inner and outer surfaces of the fuel. The fuel rods are arranged in a square-pitched array. The center-to-center spacing is 8.0 cm. The array is completely flooded with water. In the standard composition data, the uranium metal is defined to be mixture 1, the outer clad is mixture 2, the inner clad is mixture 7, the inner moderator is Plexiglas and is mixture 3, the gap is a void, and the external moderator is water, defined to be mixture 4.

LATTICECELL  ASQUAREPITCH  PITCH=8.0  4  FUELD=6.75  1  GAPD=6.8  0 CLADD=7.3  2  IMODD=4.45  3  ICLADD=4.95 7  IGAPD=5.0  0  END

EXAMPLE 6a. ASQUAREPITCH (infinitely long annular cylindrical rods in a square-pitched array).

Consider an array of uranium metal pipes having an inside diameter of 5.0 cm and an outer diameter of 6.75 cm arranged in a square-pitched array. The center-to-center spacing is 8.0 cm. The array is completely flooded with water. In the standard composition data, the uranium metal is defined to be mixture 1, the water moderator is defined to be mixture 2, and the inside water moderator is defined as mixture 3.

LATTICECELL  ASQUAREPITCH  PITCH=8.0  2  FUELD=6.75  1  IMODD=5.0  3  END

Note

This problem defines two water mixtures. If mixture 2 were entered twice, i.e., for both the inner and outer moderator, an error message would be printed and the calculation terminated.

EXAMPLE 7. ATRIANGPITCH (infinitely long annular cylindrical rods in a triangular-pitched array).

Consider an array of uranium metal pipes having an inside diameter of 8.0 cm and a wall thickness of 0.75 cm arranged in a square-pitched array. The center-to-center spacing is 9.75 cm. The array is completely flooded with water. A Plexiglas rod fills the center of the uranium pipe. In the standard compositions data, the uranium metal is defined to be mixture 1, the Plexiglas is defined to be mixture 2, and the external water moderator is mixture 3.

LATTICECELL  ATRIANGPITCH  PITCH=9.75  3  FUELD=9.5  1  IMODD=8.0  2  END

EXAMPLE 8. ASPHSQUAREP (spherical annuli in a square-pitched array).

Consider a large array of hollow U3O8 spheres having a fuel I.D. of 8.0 cm and O.D. of 18.6 cm. The centers of the spheres are empty. The external moderator is water. The spheres are stacked in a square-pitched array with a center-to-center spacing of 19.0 cm. In the standard composition data, the U3O8 is defined to be mixture 1, and the water is defined to be mixture 2. The centers of the spheres are defined to be void, mixture 0.

LATTICECELL  ASPHSQUAREP  HPITCH=9.5  2  FUELR=9.3  1  IMODR=4.0  0  END

EXAMPLE 9. ASPHTRIANGP (spheres in a triangular-pitched array).

Consider a large array of hollow U3O8 spheres having a fuel I.D. of 8.0 cm and a fuel O.D. of 18.6 cm. A 0.18-cm-thick aluminum clad exists outside the fuel. The interior of each sphere is void. The array is a triangular-pitched array with a center-to-center spacing of 19.0 cm and is flooded with water. In the standard composition data, the aluminum is defined to be mixture 1, the U3O8 is defined to be mixture 2, and the water moderator is defined to be mixture 3. The void in the center of each sphere is entered as mixture 0.

LATTICECELL ASPHTRIANGP HPITCH=9.5  3 FUELR=9.3  2 IMODR=4.0  0 CLADR=9.48  1 END

EXAMPLE 10. ASYMSLABCELL (repeated slabs having different moderator conditions on the left and right boundaries).

Consider an array of U3O8 slabs with an inner moderator region composed of full-density water with a half thickness of 8.0 cm, and a low-density water outer moderator with a 16 cm half thickness of 16 cm half thickness. Each U3O8 slab is 10.54 cm thick. In the standard composition data, the U3O8 is defined to be mixture 1, the full density water is defined to be mixture 2, and the low-density water is mixture 3. Also, have XSDRNPM create a cell weighted mixture 100 from this unit cell.

LATTICECELL ASYMSLABCELL CELLMIX=100 IMODR=8.0 2 FUELR=18.54 1  HPITCH=34.54 3 END

EXAMPLE 10a. ASYMSLABCELL (repeated slabs having different moderator conditions on the left and right boundaries).

Consider an array of U3O8 fuel plates with an inner moderator region of full-density water with a half-thickness of 8.0 cm, and with a 16 cm thick low-density outer moderator. Each fuel plate includes a 10.54 cm thick U3O8 slab with a 0.01 cm gap and 0.24-cm-thick aluminum clad on each face. In the standard composition data, the U3O8 is defined to be mixture 1, the full density water is defined to be mixture 2, and the low-density water is mixture 3, the inner aluminum is mixture 4, the outer aluminum clad is mixture 5, and both gaps are voids.

LATTICECELL ASYMSLABCELL IMODR=8.0 2 ICLADR=8.24 5 IGAPR=8.25 0 FUELR=18.79 1 GAPR 18.80 0 CLADR 19.04 4 HPITCH=27.04 3 END

MULTIREGION unit cell data

Examples of MULTIREGION unit cells follow:

EXAMPLE 1. SLAB.

Consider a 5-cm-thick slab of fuel (mixture 1) with 0.5 cm of aluminum (mixture 3) and 15 cm of water (mixture 2) on each face. The unit cell data for this problem could be entered as follows:

MULTIREGION  SLAB  LEFT_BDY=REFLECTED  RIGHT_BDY=VACUUM  ORIGIN=0  END 1  2.5  3  3.0  2  18.0  END ZONE

EXAMPLE 2. CYLINDRICAL.

Consider a large array of fuel pins. Each pin is UO2 (mixture 1) with a radius of 0.465 cm, a 0.009-cm gap (mixture 0), and a Zircaloy clad (mixture 9) 0.062 cm thick, centered in a water (mixture 8) region surrounded by a flooded support structure represented by homogenized water and Zircaloy (mixture 10). The outer radius of the water-Zircaloy region is 0.844 cm and it is 0.037 cm thick. This problem cannot be described as a LATTICECELL problem because the LATTICECELL configuration is limited to fuel-gap-clad-cell boundary and this problem is fuel-gap-clad-moderator-outer region. When MULTIREGION is used, lattice effects are accounted for by specifying a WHITE, PERIODIC, or REFLECTED right boundary condition, as long as the CENTRM/PMC self-shielding method is used. MULTIREGION cells should not be used for arrays if BONAMI-only method is specified

MULTIREGION  CYLINDRICAL RIGHT_BDY=WHITE  END 1  0.465  0  0.474  9  0.536  8  0.807  10  0.844  END ZONE

EXAMPLE 3. SPHERICAL.

Describe a bare sphere of uranium metal 8.72 cm in radius. The uranium metal is defined to be mixture 1. Also, have XSDRNPM create a cell weighted mixture 100 and calculate and eigenvalue. The unit cell data for this problem could be entered as follows:

MULTIREGION  SPHERICAL  CELLMIX=100  END   1  8.72    END ZONE

EXAMPLE 4. BUCKLEDSLAB.

Consider a plate of fuel 4 cm thick, reflected by 3 cm of water on both faces. The plate is 32 cm tall and 16 cm deep. The fuel is mixture 1 and the water is mixture 2. Also, have XSDRNPM create a cell weighted mixture 100 and calculate and eigenvalue.

MULTIREGION  BUCKLEDSLAB  CELLMIX=100  LEFT_BDY=REFLECTED  RIGHT_BDY=VACUUM DY=32 DZ=16.0  END  1  2.0  2  5.0  END ZONE

EXAMPLE 5. BUCKLEDCYL.

Consider a solution of uranyl nitrate contained in a cylindrical stainless-steel container reflected by 33 cm of water. The inside dimensions of the steel container are 7.62 cm in radius and 130.0 cm tall. The steel is 0.15 cm thick. The uranyl nitrate is defined to be mixture 1, the steel is defined to be mixture 2, and the water is defined to be mixture 3.

MULTIREGION  BUCKLEDCYL  DY=130  END 1  7.62  2  7.77  3  40.77  END ZONE

DOUBLEHET unit cell data

Unit cell data are always required for DOUBLEHET calculations. As many unit cells as needed may be defined in the problem. If CELLMIX=mx is entered after the fuel element (macro cell) description, XSProc calls XSDRNPM to calculate the eigenvalue of the cell and to create a homogenized cell-weighted cross section having the characteristics of the doubly-heterogeneous cell configuration.

EXAMPLE 1: A doubly-heterogeneous spherical fuel element with 15,000 UO2 particles in a graphite matrix.

Grain fuel radius is 0.025 cm. Grain contains one coating layer that is 0.009-cm-thick. Pebbles are in a triangular pitch on a 6.4-cm-pitch. Fuel pebble fuel zone is 2.5‑cm in radius and contains a 0.5-cm-thick graphite clad that contains small amounts of 10B. Pebbles are surrounded by 4He. Assume the composition block is below:

' UO2 FUEL KERNEL U-235  1 0 1.92585E-3 293.6 END O      1 0 4.64272E-2 293.6 END ' FIRST COATING C      2 0 5.26449E-2 293.6 END ' GRAPHITE MATRIX C      6 0 8.77414E-2 293.6 END ' CARBON PEBBLE OUTER COATING C      7 0 8.77414E-2 293.6 END B-10   7 0 9.64977E-9 293.6 END HE-4   8 0 2.65156E-5 293.6 END

The cell data for the DOUBLEHET cell follows:

DOUBLEHET FUELMIX=10 END  GFR=0.025  1 COATT=0.009 2 MATRIX=6 NUMPAR=15000 END GRAIN PEBBLE SPHTRIANGP RIGHT_BDY=WHITE HPITCH=3.2 8 FUELR=2.5 CLADR=3.0 7  END

In this case we designated the homogenized mixture as mixture 10. If we have a KENO V.a or KENO-VI input section, we would use mixture 10 in that section. Note that the keyword “FUELR=” is followed by the fuel dimension only, i.e., no mixture number. That is because the fuel mixture number is specified with “FUELMIX=” and therefore need not be repeated.

EXAMPLE 2: Same as Example 1, except volume fraction of the grain type is known and is 0.037732.

DOUBLEHET  RIGHT_BDY=WHITE FUELMIX=10 END  GFR=0.025  1 COATT=0.009 2 MATRIX=6 VF=0.037732 END GRAIN PEBBLE SPHTRIANGP RIGHT_BDY=WHITE HPITCH=3.2 8 FUELR=2.5 CLADR=3.0 7  END

EXAMPLE 3: Same as Example 1, except halfpitch of the grain type is known and is 0.10137 cm.

DOUBLEHET FUELMIX=10 END  GFR=0.025  1 COATT=0.009 2 HPITCH=0.10137 MATRIX=6 END GRAIN PEBBLE SPHTRIANGP RIGHT_BDY=WHITE HPITCH=3.2 8 FUELR=2.5 CLADR=3.0 7  END

EXAMPLE 4: A doubly-heterogeneous spherical fuel element with 10,000 UO2 particles and 5,000 PuO2 particles in a graphite matrix.

Grain fuel radii for UO2 and PuO2 particles are 0.025 cm and 0.012 cm, respectively. UO2 grains contain one coating layer that is 0.009‑cm-thick. PuO2 grains contain one coating layer that is 0.0095-cm-thick. Pebbles are in a triangular pitch on a 6.4-cm-pitch. Fuel pebble fuel zone is 2.5-cm in radius and contains a 0.5-cm-thick graphite clad that contains small amounts of 10B. Pebbles are surrounded by 4He. Assume the composition block is given below:

' UO2 FUEL KERNEL U-235  1 0 1.92585E-3 293.6 END O      1 0 4.64272E-2 293.6 END ' FIRST COATING C      2 0 5.26449E-2 293.6 END ' GRAPHITE MATRIX C      6 0 8.77414E-2 293.6 END ' CARBON PEBBLE OUTER COATING C      7 0 8.77414E-2 293.6 END B-10   7 0 9.64977E-9 293.6 END HE-4   8 0 2.65156E-5 293.6 END ' PUO2 FUEL KERNEL PU-239  11 0 1.24470E-02 293.6 END O       11 0 4.60983E-02 293.6 END ' FIRST COATING C      12 0 5.26449E-2 293.6 END ' GRAPHITE MATRIX C      16 0 8.77414E-2 293.6 END

The cell data for the DOUBLEHET cell follows:

DOUBLEHET FUELMIX=10 END  GFR=0.025  1 COATT=0.009 2 MATRIX=6 NUMPAR=10000 END GRAIN  GFR=0.012 11 COATT=0.0095 12 MATRIX=16 NUMPAR=5000 END GRAIN PEBBLE SPHTRIANGP RIGHT_BDY=WHITE HPITCH=3.2 8 FUELR=2.5 CLADR=3.0 7 END

Since number of particles is entered, the total volume fraction and the pitch can be calculated by the code.

EXAMPLE 5: Same as Example 4 above except the volume fractions of UO2 and PuO2 grains are 0.02511 and 0.00318, respectively.

DOUBLEHET  RIGHT_BDY=WHITE FUELMIX=10 END  GFR=0.025  1 COATT=0.009 2 MATRIX=6 VF=0.02511 END GRAIN  GFR=0.012 11 COATT=0.0095 12 MATRIX=16 VF=0.00318 END GRAIN PEBBLE SPHTRIANGP RIGHT_BDY=WHITE HPITCH=3.2 8 FUELR=2.5 CLADR=3.0 7 END

EXAMPLE 6: Same as Example 4 above except pitch is also known.

UO2 grains have a pitch of 0.25 cm. PuO2 grains have a pitch of 0.20 cm.

DOUBLEHET FUELMIX=10 END  GFR=0.025  1 COATT=0.009 2  MATRIX=6 NUMPAR=10000 PITCH=0.25 END GRAIN  GFR=0.012  11 COATT=0.0095 12  MATRIX=16 NUMPAR=5000 PITCH=0.20 END GRAIN PEBBLE SPHTRIANGP RIGHT_BDY=WHITE HPITCH=3.2 8 FUELR=2.5 CLADR=3.0 7 END

Since number of particles is sufficient to perform the homogenization, it is used. However, instead of calculating the pitch for the 1-D cell calculation for each grain type, the user input pitch is used. Hence, the calculated keff of Example 6 will be different from those of Examples 4 and 5.

EXAMPLE 7: Same as Example 6 except the doubly-heterogeneous cell will be cell-weighted.

The final cell-weighted mixture number is 17.

DOUBLEHET FUELMIX=10 END  GFR=0.025  1 COATT=0.009 2  NUMPAR=10000 PITCH=0.25 MATRIX=6 END GRAIN  GFR=0.012  11 COATT=0.0095 12  NUMPAR=5000 PITCH=0.20 MATRIX=16 END GRAIN PEBBLE SPHTRIANGP RIGHT_BDY=WHITE HPITCH=3.2 8 FUELR=2.5 CLADR=3.0 7 CELLMIX=17 END

EXAMPLE 8: A doubly-heterogeneous spherical fuel element with 15,000 UO2 particles in a graphite matrix.

Grain fuel radius is 0.012 cm. Grain contains four coating layers that are 0.0095, 0.004, 0.0035, and 0.004-cm-thick. Pebbles are in a square pitch on a 6.0‑cm-pitch. Fuel pebble fuel zone is 2.5-cm in radius and contains a 0.5-cm-thick graphite clad that contains small amounts of 10B. Pebbles are surrounded by 4He. Assume the composition block is given below:

' UO2 FUEL KERNEL U-235  1 0 1.92585E-3 293.6 END O      1 0 4.64272E-2 293.6 END ' FIRST COATING C      2 0 5.26449E-2 293.6 END ' INNER PYRO CARBON C      3 0 9.52621E-2 293.6 END ' SILICON CARBIDE C      4 0 4.77240E-2 293.6 END SI     4 0 4.77240E-2 293.6 END ' OUTER PYRO CARBON C      5 0 9.52621E-2 293.6 END ' GRAPHITE MATRIX GRAPHITE 6 0 8.77414E-2 293.6 END ' CARBON PEBBLE OUTER COATING C      7 0 8.77414E-2 293.6 END B-10   7 0 9.64977E-9 293.6 END HE-4   8 0 2.65156E-5 293.6 END

The cell data for the DOUBLEHET cell follows:

DOUBLEHET FUELMIX=10 END  GFR=0.012  1 COATT=0.0095 2 COATT=0.004 3 COATT=0.0035 4 COATT=0.004 5 MATRIX=6 NUMPAR=15000 VF=0.0245 END GRAIN PEBBLE SPHSQUAREP RIGHT_BDY=WHITE HPITCH=3.0 8 FUELR=2.5 CLADR=3.0 7 END

Note that the grains are overspecified and the numbers are inconsistent. A VF value of 0.0245 results in a total number of particles of 10652.32 which is considerably less than 15,000. In this case, the code will issue a warning to this effect and will use VF value in the calculations (i.e., ignore NUMPAR=15000 entry).

EXAMPLE 9: Similar to Example 8 except radii for grain regions are entered.

DOUBLEHET FUELMIX=10 END  GFR=0.012  1 COATR=0.0215 2 COATR=0.0255 3 COATR=0.029 4 COATR=0.033 5 MATRIX=6 NUMPAR=15000 VF=0.0245 END GRAIN PEBBLE SPHSQUAREP RIGHT_BDY=WHITE HPITCH=3.0 8 FUELR=2.5 CLADR=3.0 7 END

EXAMPLE 10: A doubly-heterogeneous spherical fuel element with two UO2 grain types.

First grain type has a fuel radius of 0.025 cm. Second grain type fuel radius is 0.004 cm. First grain type has one coating that is 0.009-cm-thick. Second grain type has two coatings each 0.004-cm-thick. Each grain type has a volume fraction of 0.45. Pebbles are in a triangular pitch on a 7.0-cm-pitch. Fuel pebble fuel zone is 2.5-cm in radius and contains a 0.5-cm-thick graphite clad that contains small amounts of 10B and 11B. Pebbles are surrounded by 4He. Assume the composition block is given below:

' FUEL KERNEL U-238  1 0 2.12877E-2 END U-235  1 0 1.92585E-3 END O      1 0 4.64272E-2 END B-10   1 0 1.14694E-7 END B-11   1 0 4.64570E-7 END ' FIRST COATING C      2 0 5.26449E-2 END ' INNER PYRO CARBON C      3 0 9.52621E-2 END ' SILICON CARBIDE C      4 0 4.77240E-2 END SI     4 0 4.77240E-2 END ' FUEL KERNEL U-238  5 0 2.12877E-2 END U-235  5 0 1.92585E-3 END O      5 0 4.64272E-2 END B-10   5 0 1.14694E-7 END B-11   5 0 4.64570E-7 END ' GRAPHITE MATRIX C      6 0 8.77414E-2 END B-10   6 0 9.64977E-9 END B-11   6 0 3.90864E-8 END ' CARBON PEBBLE OUTER COATING C      7 0 8.77414E-2 END B-10   7 0 9.64977E-9 END B-11   7 0 3.90864E-8 END ' HELIUM HE     8 0.000164 END ' GRAPHITE MATRIX C      9 0 8.77414E-2 END B-10   9 0 9.64977E-9 END B-11   9 0 3.90864E-8 END

The cell data for the DOUBLEHET cell follows:

DOUBLEHET FUELMIX=10 END  GFR=0.025  1 COATR=0.034 2  MATRIX=6 VF=0.45 END GRAIN  COATT=0.004 3 GFR=0.4 5 COATT=0.004 4 MATRIX=9  VF=0.45    END GRAIN PEBBLE SPHTRIANGP RIGHT_BDY=WHITE HPITCH=3.5 8 FUELD=5.0   CLADD=6.0 7 END

EXAMPLE 11: A doubly-heterogeneous hexagonal block type fuel element with UO2 grains in a cylindrical fuel region.

Grain fuel radius is 0.025 cm. Grain coating is 0.009-cm-thick. Grains have a volume fraction of 0.45. Hexagonal rods are in a 7-cm triangular pitch. Fuel rod fuel zone is 2.5-cm in radius, 10-cm-high and contains a 0.5-cm-thick graphite clad that contains small amounts of 10B. Assume the composition block is below:

' FUEL KERNEL U-238  1 0 2.12877E-2 END U-235  1 0 1.92585E-3 END O      1 0 4.64272E-2 END B-10   1 0 1.14694E-7 END ' FIRST COATING C      2 0 5.26449E-2 END ' GRAPHITE MATRIX C      6 0 8.77414E-2 END B-10   6 0 9.64977E-9 END ' CARBON PEBBLE OUTER COATING C      7 0 8.77414E-2 END B-10   7 0 9.64977E-9 END ' IRON CLADDING FE     8 END

The cell data for the DOUBLEHET cell follows:

DOUBLEHET FUELMIX=10 END  GFR=0.025  1 COATR=0.034 2  MATRIX=6 VF=0.45 END GRAIN ROD TRIANGP RIGHT_BDY=WHITE HPITCH=3.5 7 FUELD=5.0   FUELH=10 END

EXAMPLE 12: This is the same as Example 11 except the fuel elements (cylindrical rods) have 0.05‑cm-thick iron cladding.

The cell data for the DOUBLEHET cell follows:

DOUBLEHET FUELMIX=10 END  GFR=0.025  1 COATR=0.034 2  MATRIX=6 VF=0.45 END GRAIN ROD TRIANGP RIGHT_BDY=WHITE HPITCH=3.5 7 FUELR=2.5   CLADD=5.1 8 FUELH=10 END

Optional parameter data

The optional parameter data provide a means of providing additional information or alternative data to the cross-section processing codes. There are two types of optional parameter data. The first type of data is used by XSDRNPM and BONAMI for cross-section processing and cell-weighting cross sections. This type of data is initiated using the keywords MORE DATA and ends with the keywords END MORE. This input is described in Optional MORE DATA parameter data. The second type of optional parameter data is used by CENTRM and PMC for cross-section processing. This type of data is initiated using the keywords CENTRM DATA and ends with the keywords END CENTRM. This input is described in Optional CENTRM DATA parameter data. It is possible to input both types of data for a unit cell. The optional parameter data specified apply only to the unit cell that immediately precedes it.

MORE DATA examples

Consider a problem in which it is desirable to increase the number of inner iterations in XSDRNPM to 30 and to tighten the overall convergence criteria to a value of 0.000075. This could be accomplished by entering the data as follows:

MORE DATA   IIM=30  EPS=0.000075  END

The order of the data entry is not important, and it can be continued across several lines. However, a keyword and its value cannot be separated across lines. The terminator for the optional parameter data, END, must not begin in column 1 unless you assign a name to it. An alternative method of entering the above data is given below.

MORE DATA   IIM=30  EPS=0.000075 END MORE

or,

MORE DATA  IIM=30  EPS=0.000075  END MORE DATA

CENTRM DATA examples

Consider a problem in which it is desirable to increase the upper energy of the CENTRM CE transport calculation from the default of 20000 eV to a value 50000 eV, and to extend the default lower energy from 0.001 eV to 0.0001. This is accomplished by entering the data as follows:

CENTRM DATA  DEMAX=50000  DEMIN=0.0001 END CENTRM

As with the MORE DATA block, an alternative method of entering the above data is given below.

CENTRMDATA   DEMAX=50000  DEMIN=0.0001 END CENTRMDATA

CENTRM and PMC computation options can also be controlled with CENTRM DATA. A complete description of the CENTRM/PMC computational methods and options can be found the corresponding sections of the SCALE manual. The following example specifies that:

(a) discrete-level inelastic scattering will be used in CENTRM and processed in PMC [nmf6];

(b) the CENTRM 1D discrete SN transport solver will be used in the upper MG energy range [nfst] and the CE energy range [npxs], while the infinitie medium model will be used for the thermal energy range [nthr];

(c) a P3 scattering order [isct] will be used in the transport calculations;

(d) PMC will perform “consistent PN” corrections on Legendre moments of the 2D elastic matrices [n2d]; (e) additional output information will be provided by CENTRM [ixprt] and by PMC [nprt].

CENTRM DATA  NMF6=0 NFST=0 NTHR=2 ISCT=3        N2D=-2 IXPRT=1  NPRT=1    END CENTRM DATA