* DashboardFull - [x] don't display Frame Skip Mode - [x] don't enable Chopper button ( *scheduled for removal* ) - [x] don't display Attenuator control - [x] don't display Lakeshore control - [ ] remove DirectBeam button [Redmine #4856](https://idac.ornl.gov/issues/4856) - [ ] remove AutoAlign button [Redmine #4856](https://idac.ornl.gov/issues/4856) - [ ] add profile plots on dashboard [Redmine #4857](https://idac.ornl.gov/issues/4857) - [x] add BaseTitle to help visualize that it was set right - [ ] add display of sequence numbers in all modes of operation [Redmine #4856](https://idac.ornl.gov/issues/4856) - [ ] add Pause/Resume toggle button (RED=paused, GRN=running, GRAY=idle) [Redmine #4858](https://idac.ornl.gov/issues/4858) - [x] correct slit motors on dashboard status/readback - [ ] open only DashboardFull (not DashboardTwo or whatever) [Redmine #4856](https://idac.ornl.gov/issues/4856) * Main UI work - [ ] remove `(1)` button, not using DashboardOne anymore [Redmine #4856](https://idac.ornl.gov/issues/4856) - [ ] add PlanNewExperiment ( *so it can be removed from DashboardFull* ) [Redmine #4856](https://idac.ornl.gov/issues/4856) * IOC work - [ ] ~~deactivate~~ manage DirectBeam IOC [Redmine #4854](https://idac.ornl.gov/issues/4854) - [ ] ~~deactivete~~ manage AutoAlignment IOC [Redmine #4854](https://idac.ornl.gov/issues/4854) - [ ] check that the Autoreduction IOC holds the needed PVs (Earth-Centered, Beam-Centered) [Redmine #2838](https://idac.ornl.gov/issues/2838) - [ ] expose the '4 degree' hardcoded value to be a PV that can be defined [Redmine #4380](https://idac.ornl.gov/issues/4380) * Integrate SPYDER scripts ( *in `/home/controls/var/tmp/PYTHON/2025-B/*.py`* ) - [ ] CHI_scan.py [Redmine #4850](https://idac.ornl.gov/issues/4850) - [ ] Solid_theta_alignment_low_angle_2gauss.py [Redmine #4849](https://idac.ornl.gov/issues/4849) - [ ] Solid_theta_alignment_low_angle.py ( *1gauss* ) [Redmine #4849](https://idac.ornl.gov/issues/4849) - [ ] [Solid_theta_alignment_low_angle_2gauss_slit3back.py](https://code.ornl.gov/idac/cs/inst/bl4b/scripts/-/blob/main/Solid_theta_alignment_low_angle_2gauss_slit3back.py?ref_type=heads) [Redmine #4849](https://idac.ornl.gov/issues/4849) - [ ] ensure "goodness of fit" is exposed as PV and also on the output text PV [Redmine #4859](https://idac.ornl.gov/issues/4859) * DAQ tickets - [x] Scan server faults for ys, thm, etc. [Redmine #4823](https://idac.ornl.gov/issues/4823) - [ ] thi "Calibrate To" discrepancy [Redmine #4822](https://idac.ornl.gov/issues/4822)